| commit | 486d85d2d57d8af58d9d9a1592171851d00b620b | [log] [tgz] |
|---|---|---|
| author | Andrew Jeffery <andrew@aj.id.au> | Thu Aug 31 11:12:08 2023 +0930 |
| committer | Andrew Jeffery <andrew@aj.id.au> | Thu Aug 31 02:26:41 2023 +0000 |
| tree | 7a538c5d75e89b1c7634bf7717d62038bf8c75d4 | |
| parent | 3f39f9634b6151be76d0370cb70374ce4ba9ec37 [diff] |
transport: Filter for the response to the issued request mctp-demux-daemon broadcasts all messages delivered to the local endpoint to all connected UNIX domain sockets. The consequence is that e.g. the request message from pldmtool destined for pldmd on the BMC is reflected back to pldmtool. For pldm_transport_send_recv_msg(), ensure that the message received after the request is sent is specifically a response to the the request, and not the request itself. Additionally, enforce that the provided message to send is a request message, as that's the intent of the API. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Change-Id: Ib93a5bcfe5fdeae83d5853ec3c474f4ec3179c4a
This is a library which deals with the encoding and decoding of PLDM messages. It should be possible to use this library by projects other than OpenBMC, and hence certain constraints apply to it:
Source files are named according to the PLDM Type, for eg base.[h/c], fru.[h/c], etc.
Given a PLDM command "foo", the library will provide the following API: For the Requester function:
encode_foo_req() - encode a foo request decode_foo_resp() - decode a response to foo
For the Responder function:
decode_foo_req() - decode a foo request encode_foo_resp() - encode a response to foo
The library also provides API to pack and unpack PLDM headers.
Need meson and ninja. Alternatively, source an OpenBMC ARM/x86 SDK.
meson setup builddir && ninja -C builddir
The simplest way of running the tests is as described by the meson man page:
meson setup builddir && meson test -C builddir
libpldmThe ABIs (symbols, generally functions) exposed by the library are separated into three categories:
Applications depending on libpldm should aim to only use functions from the stable category. However, this may not always be possible. What to do when required functions fall into the deprecated or testing categories is outlined below.
--- title: libpldm symbol lifecycle --- stateDiagram-v2 direction LR [*] --> Testing: Add Testing --> Testing: Change Testing --> [*]: Remove Testing --> Stable: Stabilise Stable --> Deprecated: Deprecate Deprecated --> [*]: Remove
The ABI of the library produced by the build is controlled using the abi meson option. The following use cases determine how the abi option should be specified:
| Use Case | Meson Configuration |
|---|---|
| Production | -Dabi=deprecated,stable |
| Maintenance | -Dabi=stable |
| Development | -Dabi=deprecated,stable,testing |
Applications and libraries that depend on libpldm can identify how to migrate off of deprecated APIs by constraining the library ABI to the stable category. This will force the compiler identify any call-sites that try to link against deprecated symbols.
Applications and libraries often require functionality that doesn't yet exist in libpldm. The work is thus in two parts:
libpldmlibpldm in the dependent application or libraryAdding APIs to a library is a difficult task. Generally, once an API is exposed in the library's ABI, any changes to the API risk breaking applications already making use of it. To make sure we have more than one shot at getting an API right, all new APIs must first be exposed in the testing category. Concretely:
Patches adding new APIs MUST mark them as testing and MUST NOT mark them as stable.
Three macros are provided through config.h (automatically included for all translation units) to mark functions as testing, stable or deprecated:
LIBPLDM_ABI_TESTINGLIBPLDM_ABI_STABLELIBPLDM_ABI_DEPRECATEDThese annotations go immediately before your function signature:
LIBPLDM_ABI_TESTING pldm_requester_rc_t pldm_transport_send_msg(struct pldm_transport *transport, pldm_tid_t tid, const void *pldm_req_msg, size_t req_msg_len) { ... }
As mentioned above, all new functions must first be added in the testing category (using the LIBPLDM_ABI_TESTING annotation).
To move a function from the testing category to the stable category, its required that patches demonstrating use of the function in a dependent application or library be linked in the commit message of the stabilisation change. We require this to demonstrate that the implementer has considered its use in context before preventing us from making changes to the API.
Meson is broadly used in the OpenBMC ecosystem, the historical home of libpldm. Meson's subprojects are a relatively painless way of managing dependencies for the purpose of developing complex applications and libraries. Use of libpldm as a subproject is both supported and encouraged.
libpldm's ABI can be controlled from a parent project through meson's subproject configuration syntax:
$ meson setup ... -Dlibpldm:abi=deprecated,stable,testing ...
This will support OEM or vendor-specific functions and semantic information. Following directory structure has to be used:
libpldm |---- include/libpldm | |---- oem/<oem_name>/libpldm | |----<oem based .h files> |---- src | |---- oem/<oem_name> | |----<oem based .c files> |---- tests | |---- oem/<oem_name> | |----<oem based test files>
<oem_name> - This folder must be created with the name of the OEM/vendor in lower case.
Header files & source files having the oem functionality for the libpldm library should be placed under the respective folder hierarchy as mentioned in the above figure. They must be adhering to the rules mentioned under the libpldm section above.
Once the above is done a meson option has to be created in meson.options with its mapped compiler flag to enable conditional compilation.
For consistency would recommend using "oem-<oem_name>".
The meson.build and the corresponding source file(s) will need to incorporate the logic of adding its mapped compiler flag to allow conditional compilation of the code.
The pldm requester API's are present in src/requester folder and they are intended to provide API's to interact with the desired underlying transport layer to send/receive pldm messages.
NOTE : In the current state, the requester API's in the repository only works with specific transport mechanism & these are going to change in future & probably aren't appropriate to be writing code against.