diff --git a/meta-ethanolx/recipes-phosphor/configuration/ethanolx-yaml-config/ethanolx-ipmi-sensors.yaml b/meta-ethanolx/recipes-phosphor/configuration/ethanolx-yaml-config/ethanolx-ipmi-sensors.yaml
index 31c3024..8083ee5 100644
--- a/meta-ethanolx/recipes-phosphor/configuration/ethanolx-yaml-config/ethanolx-ipmi-sensors.yaml
+++ b/meta-ethanolx/recipes-phosphor/configuration/ethanolx-yaml-config/ethanolx-ipmi-sensors.yaml
@@ -156,4 +156,47 @@
       Value:
         Offsets:
           0xFF:
+            type: int64_t
+
+9:
+  entityID: 0x1D
+  sensorType: 0x04
+  path: /xyz/openbmc_project/sensors/fan_tach/P0_Fan_Speed
+  sensorReadingType: 0x01
+  multiplierM: 1
+  offsetB: 0
+  bExp: 0
+  unit: xyz.openbmc_project.Sensor.Value.Unit.RPMS
+  scale: 0
+  rExp: 0
+  mutability: Mutability::Read
+  serviceInterface: org.freedesktop.DBus.Properties
+  readingType: readingData
+  interfaces:
+    xyz.openbmc_project.Sensor.Value:
+      Value:
+        Offsets:
+          0x0:
+            type: int64_t
+
+
+10:
+  entityID: 0x1D
+  sensorType: 0x04
+  path: /xyz/openbmc_project/sensors/fan_tach/P1_Fan_Speed
+  sensorReadingType: 0x01
+  multiplierM: 1
+  offsetB: 0
+  bExp: 0
+  unit: xyz.openbmc_project.Sensor.Value.Unit.RPMS
+  scale: 0
+  rExp: 0
+  mutability: Mutability::Read
+  serviceInterface: org.freedesktop.DBus.Properties
+  readingType: readingData
+  interfaces:
+    xyz.openbmc_project.Sensor.Value:
+      Value:
+        Offsets:
+          0x0:
             type: int64_t
\ No newline at end of file
diff --git a/meta-ethanolx/recipes-phosphor/sensors/phosphor-hwmon/obmc/hwmon/ahb/apb/pwm-tacho-controller@1e786000.conf b/meta-ethanolx/recipes-phosphor/sensors/phosphor-hwmon/obmc/hwmon/ahb/apb/pwm-tacho-controller@1e786000.conf
index a781bcf..0620d16 100644
--- a/meta-ethanolx/recipes-phosphor/sensors/phosphor-hwmon/obmc/hwmon/ahb/apb/pwm-tacho-controller@1e786000.conf
+++ b/meta-ethanolx/recipes-phosphor/sensors/phosphor-hwmon/obmc/hwmon/ahb/apb/pwm-tacho-controller@1e786000.conf
@@ -1,7 +1,23 @@
 # EthanolX has 8 fan ports but only 2 are standard 4-wire fans with PWM and TACH.
-LABEL_fan1 = "P0 fan"
-LABEL_fan2 = "P1 fan"
+LABEL_fan1 = "P0_Fan_Speed"
+LABEL_fan2 = "P1_Fan_Speed"
 
 PWM_TARGET_fan1 = "1"
 PWM_TARGET_fan2 = "2"
 
+WARNLO_fan1= "10"
+WARNHI_fan1= "8000"
+CRITHI_fan1 = "10000"
+CRITLO_fan1 = "0"
+MINVALUE_fan1 = "100"
+MAXVALUE_fan1 = "6000"
+EVENT_fan1= "WARNHI,WARNLO,CRITHI,CRITLO"
+
+WARNLO_fan2= "10"
+WARNHI_fan2= "8000"
+CRITHI_fan2 = "10000"
+CRITLO_fan2 = "0"
+MINVALUE_fan2 = "100"
+MAXVALUE_fan2 = "6000"
+EVENT_fan2= "WARNHI,WARNLO,CRITHI,CRITLO"
+