diff --git a/recipes-amd/amd-powerctrl/files/setup_gpio.sh b/recipes-amd/amd-powerctrl/files/setup_gpio.sh
new file mode 100755
index 0000000..629bb48
--- /dev/null
+++ b/recipes-amd/amd-powerctrl/files/setup_gpio.sh
@@ -0,0 +1,46 @@
+#!/bin/bash
+
+# Set all output GPIOs as such and drive them with reasonable values.
+function set_gpio_active_low() {
+  if [ $# -ne 3 ]; then
+    echo "set_gpio_active_low: need GPIO#, active_low and initial value";
+    return;
+  fi
+
+  echo $1 > /sys/class/gpio/export
+  echo $2 > /sys/class/gpio/gpio$1/active_low
+  echo $3 > /sys/class/gpio/gpio$1/direction
+}
+
+GPIO_BASE=$(cat /sys/devices/platform/ahb/ahb:apb/1e780000.gpio/gpio/*/base)
+# MGMT_ASSERT_BMC_READY - Hold low until BMC has completed initialization, then drive high, GPIO M7,  (Default = Low)
+GPIO_BMC_READY=$((${GPIO_BASE} + 96 + 7))
+
+#MGMT_ASSERT_PWR_BTN - Asserts the system power button, GPIO M0, Active High,  (Default = Low)
+set_gpio_active_low $((${GPIO_BASE} + 96 + 0)) 0 low
+
+#MGMT_ASSERT_RST_BTN - Assert the system cold reset button, GPIO M1, Active High,  (Default = Low)
+set_gpio_active_low $((${GPIO_BASE} + 96 + 1)) 0 low
+
+#MGMT_ASSERT_NMI_BTN - Asserts the system NMI button, GPIO M2 Active High,  (Default = Low)
+set_gpio_active_low $((${GPIO_BASE} + 96 + 2)) 0 low
+
+#MGMT_ASSERT_P0_PROCHOT - Asserts the P0 PROCHOT_L signal, GPIO M4, Active High,  (Default = Low)
+set_gpio_active_low $((${GPIO_BASE} + 96 + 4)) 0 low
+
+#MGMT_ASSERT_P1_PROCHOT - Asserts the P1 PROCHOT_L signal, GPIO M6, Active High,  (Default = Low)
+set_gpio_active_low $((${GPIO_BASE} + 96 + 5)) 0 low
+
+#MGMT_ASSERT_CLR_CMOS - Clears processor CMOS, assert high for 1s To clear CMOS,  (Default = Low)
+set_gpio_active_low $((${GPIO_BASE} + 96 + 6)) 0 low
+
+# MGMT_ASSERT_BMC_READY - Hold low until BMC has completed initialization, then drive high, GPIO M7,  (Default = Low)
+set_gpio_active_low $((${GPIO_BASE} + 96 + 7)) 0 low
+
+# DRIVE BMC_READY HIGH
+echo 1 > /sys/class/gpio/gpio${GPIO_BMC_READY}/value
+POWER_STATUS=on
+# Write to temp. file named "power_status"
+rm -f /tmp/power_status
+printf %s "$POWER_STATUS" > /tmp/power_status
+exit 0;