From 5362492a7546230866dc4a45269bb3dae65306cb Mon Sep 17 00:00:00 2001
From: Andrew Jeffery <andrew@aj.id.au>
Date: Fri, 2 Sep 2016 12:22:41 +0930
Subject: [PATCH] work-around: aspeed-bmc-opp-palmetto: Add GPIO hogs to
 devicetree

This is a work-in-progress patch that attempts to emulate the GPIO
state originally written by the mach-aspeed board file.

It isn't entirely analogous: Whilst values might be set in the GPIO
data/direction registers, this doesn't mean the GPIO IP was in control
of the pins affected by the bits in question. However, the content of
the patch is derived directly from the data and direction values that
Steve Faure reported[1] from a Palmetto running the OpenBMC stable branch.

Secondly, the patch pays no regard to the prescribed active state of the lines
and assumes active high for all pins. This is not a reflection of the
description in the schematic, and neither do the configured GPIO values
necessarily reflect the prescribed initial values from the schematic.

A starting point for the patch was generated from the following Python script:

	 #!/usr/bin/python3
	 import sys

	 from collections import namedtuple

	 GpioRegsetConfig = namedtuple("GpioRegsetConfig", "banks value direction")
	 banks = ( "ABCD", "EFGH" )

	 broken = (
		 GpioRegsetConfig(banks[0], 0x130F8CE3, 0x01706074),
		 GpioRegsetConfig(banks[1], 0x9F48F7FF, 0x00004002)
	 )

	 working = (
		 GpioRegsetConfig(banks[0], 0x130F8CE3, 0x0370E677),
		 GpioRegsetConfig(banks[1], 0x0370E677, 0xC738F202)
	 )

	 GpioConfig = namedtuple("GpioConfig", "bank index direction state active")

	 def gpio_dt(name, config):
	     fmt = "pin_gpio_{} {{\n\tgpio-hog;\n\tgpios = <ASPEED_GPIO({}, {}) {}>;\n\t{};\n\tline-name = \"{}\";\n}};"
	     if "output" == config.direction:
		 state = "{}-{}".format(config.direction, config.state)
	     else:
		 state = config.direction
	     return fmt.format(
		 name.lower(),
		 config.bank,
		 config.index,
		 "GPIO_ACTIVE_HIGH",
		 state,
		 name)

	 def tell_gpios(config, change):
	     for i, bank in enumerate(config.banks):
		 for j in range(0, 8):
		     bi = i * 8 + j;
		     if ((1 << bi) & change) > 0:
			 gpio = "{}{}".format(bank, j)
			 if (bi & config.direction) > 0:
			     sd = "output"
			     value = "high" if (bi & config.value) > 0 else "low"
			 else:
			     sd = "input"
			     value = None
			 dtconfig = GpioConfig(bank, j, sd, value, "GPIO_ACTIVE_HIGH")
			 print(gpio_dt(gpio, dtconfig))
			 print()

	 def main():
	     for b, w in zip(broken, working):
		 cd = b.direction ^ w.direction
		 tell_gpios(w, cd)

	 if __name__ == "__main__":
	     main()

The generated patch was tested on a Pass 2 Palmetto. It was found that with the
patch and an OpenBMC userspace generated at v1.99.0-60-g2b717d8489c1, the host
could:

* Boot to Petitboot
* Reboot to Petitboot
* Survive a reboot of the BMC (remain functional at the Petitboot shell)
* Be powered off by the BMC after reboot

Reports from Andrew Geissler[2] and Cédric Le Goater[3] suggest mixed results
across the Palmetto fleet, but this patch at least represents a step forwards.

For the above reasons and those below, this patch is a temporary work-around:

* GPIOs configured as hogs cannot have their line state changed once initialised
* GPIOs configured as hogs will not be exposed to userspace even if requested

These two issues combined deny capabilities such as Cronus. The ultimate
solution is userspace daemon(s) requesting and controlling the GPIOs as
desired.

[1] https://github.com/openbmc/openbmc/issues/527#issuecomment-244239595
[2] https://github.com/openbmc/openbmc/issues/513#issuecomment-244454018
[3] https://github.com/openbmc/openbmc/issues/513#issuecomment-244414523

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
---
 arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts | 127 ++++++++++++++++++++++++++
 1 file changed, 127 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
index 21619fd8cd8d..5c689613e5bd 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
@@ -167,6 +167,133 @@
 		output-low;
 		line-name = "func_mode2";
 	};
+
+	pin_gpio_a0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(A, 0) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "A0";
+	};
+
+	pin_gpio_a1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(A, 1) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "A1";
+	};
+
+	pin_gpio_b1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(B, 1) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "B1";
+	};
+
+	pin_gpio_b2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "B2";
+	};
+
+	pin_gpio_b7 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(B, 7) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "B7";
+	};
+
+	pin_gpio_d1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(D, 1) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "D1";
+	};
+
+	pin_gpio_f1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 1) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "F1";
+	};
+
+	pin_gpio_f4 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 4) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "F4";
+	};
+
+	pin_gpio_f5 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 5) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "F5";
+	};
+
+	pin_gpio_f7 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 7) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "F7";
+	};
+
+	pin_gpio_g3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(G, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "G3";
+	};
+
+	pin_gpio_g4 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "G4";
+	};
+
+	pin_gpio_g5 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(G, 5) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "G5";
+	};
+
+	pin_gpio_h0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "H0";
+	};
+
+	pin_gpio_h1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "H1";
+	};
+
+	pin_gpio_h2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "H2";
+	};
+
+	pin_gpio_h6 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(H, 6) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "H6";
+	};
+
+	pin_gpio_h7 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "H7";
+	};
+
 };
 
 &vuart {
-- 
2.7.4