diff --git a/meta-tiogapass/recipes-fbtp/fb-powerctrl/files/host-poweroff.service b/meta-tiogapass/recipes-fbtp/fb-powerctrl/files/host-poweroff.service
index 95c7708..d23ef90 100644
--- a/meta-tiogapass/recipes-fbtp/fb-powerctrl/files/host-poweroff.service
+++ b/meta-tiogapass/recipes-fbtp/fb-powerctrl/files/host-poweroff.service
@@ -5,5 +5,5 @@
 
 [Service]
 Type=oneshot
-ExecStart=/usr/sbin/power-util mb 1 off
+ExecStart=/usr/sbin/power-util mb off
 SyslogIdentifier=power-util
diff --git a/meta-tiogapass/recipes-fbtp/fb-powerctrl/files/host-poweron.service b/meta-tiogapass/recipes-fbtp/fb-powerctrl/files/host-poweron.service
index b070eda..446df38 100644
--- a/meta-tiogapass/recipes-fbtp/fb-powerctrl/files/host-poweron.service
+++ b/meta-tiogapass/recipes-fbtp/fb-powerctrl/files/host-poweron.service
@@ -5,7 +5,7 @@
 
 [Service]
 Type=oneshot
-ExecStart=/usr/sbin/power-util mb 1 on
+ExecStart=/usr/sbin/power-util mb on
 SyslogIdentifier=power-util
 
 [Install]
diff --git a/meta-tiogapass/recipes-fbtp/fb-powerctrl/files/power-util b/meta-tiogapass/recipes-fbtp/fb-powerctrl/files/power-util
index 59f91ec..a2261fb 100755
--- a/meta-tiogapass/recipes-fbtp/fb-powerctrl/files/power-util
+++ b/meta-tiogapass/recipes-fbtp/fb-powerctrl/files/power-util
@@ -1,48 +1,96 @@
 #!/bin/bash
 # Usage of this utility
 function usage() {
-	echo "usage: power-util mb 1 [on|off]";
+	echo "usage: power-util mb [on|off|status|cycle|reset]";
+	echo "       power-util sled-cycle"
 }
 
 GPIO_BASE=$(cat /sys/class/gpio/gpio*/base)
 PWR_GPIO=$(($GPIO_BASE + 32 + 3))
 BMC_RDY_GPIO=$(($GPIO_BASE + 144 +1))
+PWR_GOOD=$(($GPIO_BASE + 8 + 6))
+PWR_RESET=$(($GPIO_BASE + 33))
 
-if [ $# -lt 3 ]; then
+power_off() {
+	echo "Shutting down Server $2"
+	echo 1 > /sys/class/gpio/gpio${PWR_GPIO}/value
+	sleep 1
+	echo 0 > /sys/class/gpio/gpio${PWR_GPIO}/value
+	sleep 6
+	echo 1 > /sys/class/gpio/gpio${PWR_GPIO}/value
+}
+
+power_on() {
+	echo "Powering on Server $2"
+	echo 0 > /sys/class/gpio/gpio${BMC_RDY_GPIO}/value
+	echo 1 > /sys/class/gpio/gpio${PWR_GPIO}/value
+	echo 0 > /sys/class/gpio/gpio${PWR_GPIO}/value
+	sleep 1
+	echo 1 > /sys/class/gpio/gpio${PWR_GPIO}/value
+}
+
+power_status() {
+	st=$(cat /sys/class/gpio/gpio${PWR_GOOD}/value)
+	if [ "$st" == "0" ]; then
+		echo "off"
+	else
+		echo "on"
+	fi
+}
+
+power_reset() {
+	echo "Reset on server $2"
+	echo 0 > /sys/class/gpio/gpio${PWR_RESET}/value
+  sleep 0.1
+	echo 1 > /sys/class/gpio/gpio${PWR_RESET}/value
+}
+
+sled_cycle() {
+	i2cset -y 7 0x45 0xd9 c
+}
+
+if [ $# -lt 2 ]; then
 	echo "Total number of parameter=$#"
 	echo "Insufficient parameter"
 	usage;
 	exit 0;
 fi
 
+if [ $1 == "sled-cycle" ]; then
+	sled_cycle
+fi
+
 if [ $1 != "mb" ]; then
 	echo "Invalid parameter1=$1"
 	usage;
 	exit 0;
 fi
 
-if [ $2 -ne 1 ]; then
-	echo "Invalid parameter2=$2, Server $2 not supported"
-	usage;
-	exit 0;
-fi
-
-if [ $3 = "on" ]; then
-	echo "Powering on Server $2"
-	echo 0 > /sys/class/gpio/gpio${BMC_RDY_GPIO}/value
-	echo 1 > /sys/class/gpio/gpio${PWR_GPIO}/value
-	echo 0 > /sys/class/gpio/gpio${PWR_GPIO}/value
-	sleep 1
-	echo 1 > /sys/class/gpio/gpio${PWR_GPIO}/value
-elif [ $3 = "off" ]; then
-	echo "Shutting down Server $2"
-	echo 1 > /sys/class/gpio/gpio${PWR_GPIO}/value
-	sleep 1
-	echo 0 > /sys/class/gpio/gpio${PWR_GPIO}/value
-	sleep 6
-	echo 1 > /sys/class/gpio/gpio${PWR_GPIO}/value
+if [ $2 = "on" ]; then
+  if [ $(power_status) == "off" ]; then
+	  power_on
+  fi
+elif [ $2 = "off" ]; then
+  if [ $(power_status) == "on" ]; then
+	  power_off
+  fi
+elif [ $2 == "cycle" ]; then
+  if [ $(power_status) == "on" ]; then
+	  power_off
+  else
+    echo "WARNING: Powering on server"
+  fi
+	power_on
+elif [ $2 == "reset" ]; then
+  if [ $(power_status) == "on" ]; then
+	  power_reset
+  else
+    echo "ERROR: Server not powered on"
+  fi
+elif [ $2 == "status" ]; then
+	power_status
 else
-	echo "Invalid parameter3=$3"
+	echo "Invalid parameter2=$2"
 	usage;
 fi
 
diff --git a/meta-tiogapass/recipes-fbtp/fb-powerctrl/files/setup_gpio.sh b/meta-tiogapass/recipes-fbtp/fb-powerctrl/files/setup_gpio.sh
index 4e13109..1b1b2e3 100755
--- a/meta-tiogapass/recipes-fbtp/fb-powerctrl/files/setup_gpio.sh
+++ b/meta-tiogapass/recipes-fbtp/fb-powerctrl/files/setup_gpio.sh
@@ -17,12 +17,22 @@
 set_gpio_active_low $((${GPIO_BASE} + 144 +1)) high
 
 # FM_BMC_SSB_SMI_LPC_N, GPIO Q6, active low
-set_gpio_active_low $((${GPIO_BASE} + 128 + 6)) high
+#set_gpio_active_low $((${GPIO_BASE} + 128 + 6)) high
 
 # FP_PWR_BTN_PASS_R_N, GPIO E3, active low
 set_gpio_active_low $((${GPIO_BASE} + 32 + 3)) high
 
 # FP_PWR_GOOD, GPIO B6, active low
-set_gpio_active_low $((${GPIO_BASE} + 8 + 6)) high
+set_gpio_active_low $((${GPIO_BASE} + 8 + 6)) in
+
+# SYSRST_BTN_OUT_N, GPIO E1, active low
+set_gpio_active_low $((${GPIO_BASE} + 32 + 1)) high
+
+# FP_PECI_MUX, active low
+set_gpio_active_low $((${GPIO_BASE} + 212)) high
+
+# Set PECI Mux to high to select Peci interface
+echo 1 > /sys/class/gpio/gpio$((${GPIO_BASE} + 212))/value
+
 
 exit 0;