diff --git a/meta-witherspoon/recipes-kernel/linux/linux-aspeed/0001-ARM-dts-Aspeed-Witherspoon-128-Update-BMC-partitioni.patch b/meta-witherspoon/recipes-kernel/linux/linux-aspeed/0001-ARM-dts-Aspeed-Witherspoon-128-Update-BMC-partitioni.patch
new file mode 100644
index 0000000..547d5f0
--- /dev/null
+++ b/meta-witherspoon/recipes-kernel/linux/linux-aspeed/0001-ARM-dts-Aspeed-Witherspoon-128-Update-BMC-partitioni.patch
@@ -0,0 +1,748 @@
+From a3007793ae0c53b4a39159c6d69502de832a0914 Mon Sep 17 00:00:00 2001
+From: Adriana Kobylak <anoo@us.ibm.com>
+Date: Thu, 7 Feb 2019 11:23:00 -0600
+Subject: [PATCH] ARM: dts: Aspeed: Witherspoon-128: Update BMC partitioning
+
+Create a Witherspoon-128 dts based off Witherspoon but with 128MB
+BMC flash chips.
+
+Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
+---
+ arch/arm/boot/dts/Makefile                         |   1 +
+ .../boot/dts/aspeed-bmc-opp-witherspoon-128.dts    | 712 +++++++++++++++++++++
+ 2 files changed, 713 insertions(+)
+ create mode 100644 arch/arm/boot/dts/aspeed-bmc-opp-witherspoon-128.dts
+
+diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
+index bd40148..2341358 100644
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -1245,6 +1245,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
+ 	aspeed-bmc-opp-palmetto.dtb \
+ 	aspeed-bmc-opp-romulus.dtb \
+ 	aspeed-bmc-opp-witherspoon.dtb \
++	aspeed-bmc-opp-witherspoon-128.dtb \
+ 	aspeed-bmc-opp-zaius.dtb \
+ 	aspeed-bmc-portwell-neptune.dtb \
+ 	aspeed-bmc-quanta-q71l.dtb
+diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon-128.dts b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon-128.dts
+new file mode 100644
+index 0000000..db34564
+--- /dev/null
++++ b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon-128.dts
+@@ -0,0 +1,712 @@
++// SPDX-License-Identifier: GPL-2.0+
++/dts-v1/;
++#include "aspeed-g5.dtsi"
++#include <dt-bindings/gpio/aspeed-gpio.h>
++#include <dt-bindings/leds/leds-pca955x.h>
++
++/ {
++	model = "Witherspoon BMC";
++	compatible = "ibm,witherspoon-bmc", "aspeed,ast2500";
++
++	chosen {
++		stdout-path = &uart5;
++		bootargs = "console=ttyS4,115200 earlyprintk";
++	};
++
++	memory@80000000 {
++		reg = <0x80000000 0x20000000>;
++	};
++
++	reserved-memory {
++		#address-cells = <1>;
++		#size-cells = <1>;
++		ranges;
++
++		flash_memory: region@98000000 {
++			no-map;
++			reg = <0x98000000 0x04000000>; /* 64M */
++		};
++
++		gfx_memory: framebuffer {
++			size = <0x01000000>;
++			alignment = <0x01000000>;
++			compatible = "shared-dma-pool";
++			reusable;
++		};
++
++		video_engine_memory: jpegbuffer {
++			size = <0x02000000>;	/* 32MM */
++			alignment = <0x01000000>;
++			compatible = "shared-dma-pool";
++			reusable;
++		};
++	};
++
++	gpio-keys {
++		compatible = "gpio-keys";
++
++		air-water {
++			label = "air-water";
++			gpios = <&gpio ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>;
++			linux,code = <ASPEED_GPIO(B, 5)>;
++		};
++
++		checkstop {
++			label = "checkstop";
++			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
++			linux,code = <ASPEED_GPIO(J, 2)>;
++		};
++
++		ps0-presence {
++			label = "ps0-presence";
++			gpios = <&gpio ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
++			linux,code = <ASPEED_GPIO(P, 7)>;
++		};
++
++		ps1-presence {
++			label = "ps1-presence";
++			gpios = <&gpio ASPEED_GPIO(N, 0) GPIO_ACTIVE_LOW>;
++			linux,code = <ASPEED_GPIO(N, 0)>;
++		};
++	};
++
++	iio-hwmon-battery {
++		compatible = "iio-hwmon";
++		io-channels = <&adc 12>;
++	};
++
++	gpio-keys-polled {
++		compatible = "gpio-keys-polled";
++		#address-cells = <1>;
++		#size-cells = <0>;
++		poll-interval = <1000>;
++
++		fan0-presence {
++			label = "fan0-presence";
++			gpios = <&pca0 4 GPIO_ACTIVE_LOW>;
++			linux,code = <4>;
++		};
++
++		fan1-presence {
++			label = "fan1-presence";
++			gpios = <&pca0 5 GPIO_ACTIVE_LOW>;
++			linux,code = <5>;
++		};
++
++		fan2-presence {
++			label = "fan2-presence";
++			gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
++			linux,code = <6>;
++		};
++
++		fan3-presence {
++			label = "fan3-presence";
++			gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
++			linux,code = <7>;
++		};
++	};
++
++	leds {
++		compatible = "gpio-leds";
++
++		fan0 {
++			retain-state-shutdown;
++			default-state = "keep";
++			gpios = <&pca0 0 GPIO_ACTIVE_LOW>;
++		};
++
++		fan1 {
++			retain-state-shutdown;
++			default-state = "keep";
++			gpios = <&pca0 1 GPIO_ACTIVE_LOW>;
++		};
++
++		fan2 {
++			retain-state-shutdown;
++			default-state = "keep";
++			gpios = <&pca0 2 GPIO_ACTIVE_LOW>;
++		};
++
++		fan3 {
++			retain-state-shutdown;
++			default-state = "keep";
++			gpios = <&pca0 3 GPIO_ACTIVE_LOW>;
++		};
++
++		front-fault {
++			retain-state-shutdown;
++			default-state = "keep";
++			gpios = <&pca0 13 GPIO_ACTIVE_LOW>;
++		};
++
++		front-power {
++			retain-state-shutdown;
++			default-state = "keep";
++			gpios = <&pca0 14 GPIO_ACTIVE_LOW>;
++		};
++
++		front-id {
++			retain-state-shutdown;
++			default-state = "keep";
++			gpios = <&pca0 15 GPIO_ACTIVE_LOW>;
++		};
++
++		rear-fault {
++			gpios = <&gpio ASPEED_GPIO(N, 2) GPIO_ACTIVE_LOW>;
++		};
++
++		rear-id {
++			gpios = <&gpio ASPEED_GPIO(N, 4) GPIO_ACTIVE_LOW>;
++		};
++
++		rear-power {
++			gpios = <&gpio ASPEED_GPIO(N, 3) GPIO_ACTIVE_LOW>;
++		};
++
++		power-button {
++			gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>;
++		};
++	};
++
++	fsi: gpio-fsi {
++		compatible = "fsi-master-gpio", "fsi-master";
++		#address-cells = <2>;
++		#size-cells = <0>;
++		no-gpio-delays;
++
++		clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
++		data-gpios = <&gpio ASPEED_GPIO(E, 0) GPIO_ACTIVE_HIGH>;
++		mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
++		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
++		trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
++	};
++
++	iio-hwmon-dps310 {
++		compatible = "iio-hwmon";
++		io-channels = <&dps 0>;
++	};
++
++	iio-hwmon-bmp280 {
++		compatible = "iio-hwmon";
++		io-channels = <&bmp 1>;
++	};
++
++};
++
++&fmc {
++	status = "okay";
++
++	flash@0 {
++		status = "okay";
++		label = "bmc";
++		m25p,fast-read;
++		spi-max-frequency = <100000000>;
++		partitions {
++			#address-cells = < 1 >;
++			#size-cells = < 1 >;
++			compatible = "fixed-partitions";
++			u-boot@0 {
++				reg = < 0 0x60000 >;
++				label = "u-boot";
++			};
++			u-boot-env@60000 {
++				reg = < 0x60000 0x20000 >;
++				label = "u-boot-env";
++			};
++			obmc-ubi@80000 {
++				reg = < 0x80000 0x7F80000>;
++				label = "obmc-ubi";
++			};
++		};
++	};
++
++	flash@1 {
++		status = "okay";
++		label = "alt-bmc";
++		m25p,fast-read;
++		spi-max-frequency = <100000000>;
++		partitions {
++			#address-cells = < 1 >;
++			#size-cells = < 1 >;
++			compatible = "fixed-partitions";
++			u-boot@0 {
++				reg = < 0 0x60000 >;
++				label = "alt-u-boot";
++			};
++			u-boot-env@60000 {
++				reg = < 0x60000 0x20000 >;
++				label = "alt-u-boot-env";
++			};
++			obmc-ubi@80000 {
++				reg = < 0x80000 0x7F80000>;
++				label = "alt-obmc-ubi";
++			};
++		};
++	};
++};
++
++&spi1 {
++	status = "okay";
++	pinctrl-names = "default";
++	pinctrl-0 = <&pinctrl_spi1_default>;
++
++	flash@0 {
++		status = "okay";
++		label = "pnor";
++		m25p,fast-read;
++		spi-max-frequency = <100000000>;
++	};
++};
++
++&uart1 {
++	/* Rear RS-232 connector */
++	status = "okay";
++	pinctrl-names = "default";
++	pinctrl-0 = <&pinctrl_txd1_default
++			&pinctrl_rxd1_default
++			&pinctrl_nrts1_default
++			&pinctrl_ndtr1_default
++			&pinctrl_ndsr1_default
++			&pinctrl_ncts1_default
++			&pinctrl_ndcd1_default
++			&pinctrl_nri1_default>;
++};
++
++&uart2 {
++	/* APSS */
++	status = "okay";
++	pinctrl-names = "default";
++	pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
++};
++
++&uart5 {
++	status = "okay";
++};
++
++&lpc_ctrl {
++	status = "okay";
++	memory-region = <&flash_memory>;
++	flash = <&spi1>;
++};
++
++&mbox {
++	status = "okay";
++};
++
++&mac0 {
++	status = "okay";
++	pinctrl-names = "default";
++	pinctrl-0 = <&pinctrl_rmii1_default>;
++	use-ncsi;
++};
++
++&i2c2 {
++	status = "okay";
++
++	/* MUX ->
++	 *    Samtec 1
++	 *    Samtec 2
++	 */
++};
++
++&i2c3 {
++	status = "okay";
++
++	bmp: bmp280@77 {
++		compatible = "bosch,bmp280";
++		reg = <0x77>;
++		#io-channel-cells = <1>;
++	};
++
++	max31785@52 {
++		compatible = "maxim,max31785a";
++		reg = <0x52>;
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		fan@0 {
++			compatible = "pmbus-fan";
++			reg = <0>;
++			tach-pulses = <2>;
++			maxim,fan-rotor-input = "tach";
++			maxim,fan-pwm-freq = <25000>;
++			maxim,fan-dual-tach;
++			maxim,fan-no-watchdog;
++			maxim,fan-no-fault-ramp;
++			maxim,fan-ramp = <2>;
++			maxim,fan-fault-pin-mon;
++		};
++
++		fan@1 {
++			compatible = "pmbus-fan";
++			reg = <1>;
++			tach-pulses = <2>;
++			maxim,fan-rotor-input = "tach";
++			maxim,fan-pwm-freq = <25000>;
++			maxim,fan-dual-tach;
++			maxim,fan-no-watchdog;
++			maxim,fan-no-fault-ramp;
++			maxim,fan-ramp = <2>;
++			maxim,fan-fault-pin-mon;
++		};
++
++		fan@2 {
++			compatible = "pmbus-fan";
++			reg = <2>;
++			tach-pulses = <2>;
++			maxim,fan-rotor-input = "tach";
++			maxim,fan-pwm-freq = <25000>;
++			maxim,fan-dual-tach;
++			maxim,fan-no-watchdog;
++			maxim,fan-no-fault-ramp;
++			maxim,fan-ramp = <2>;
++			maxim,fan-fault-pin-mon;
++		};
++
++		fan@3 {
++			compatible = "pmbus-fan";
++			reg = <3>;
++			tach-pulses = <2>;
++			maxim,fan-rotor-input = "tach";
++			maxim,fan-pwm-freq = <25000>;
++			maxim,fan-dual-tach;
++			maxim,fan-no-watchdog;
++			maxim,fan-no-fault-ramp;
++			maxim,fan-ramp = <2>;
++			maxim,fan-fault-pin-mon;
++		};
++	};
++
++	dps: dps310@76 {
++		compatible = "infineon,dps310";
++		reg = <0x76>;
++		#io-channel-cells = <0>;
++	};
++
++	pca0: pca9552@60 {
++		compatible = "nxp,pca9552";
++		reg = <0x60>;
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		gpio-controller;
++		#gpio-cells = <2>;
++
++		gpio@0 {
++			reg = <0>;
++			type = <PCA955X_TYPE_GPIO>;
++		};
++
++		gpio@1 {
++			reg = <1>;
++			type = <PCA955X_TYPE_GPIO>;
++		};
++
++		gpio@2 {
++			reg = <2>;
++			type = <PCA955X_TYPE_GPIO>;
++		};
++
++		gpio@3 {
++			reg = <3>;
++			type = <PCA955X_TYPE_GPIO>;
++		};
++
++		gpio@4 {
++			reg = <4>;
++			type = <PCA955X_TYPE_GPIO>;
++		};
++
++		gpio@5 {
++			reg = <5>;
++			type = <PCA955X_TYPE_GPIO>;
++		};
++
++		gpio@6 {
++			reg = <6>;
++			type = <PCA955X_TYPE_GPIO>;
++		};
++
++		gpio@7 {
++			reg = <7>;
++			type = <PCA955X_TYPE_GPIO>;
++		};
++
++		gpio@8 {
++			reg = <8>;
++			type = <PCA955X_TYPE_GPIO>;
++		};
++
++		gpio@9 {
++			reg = <9>;
++			type = <PCA955X_TYPE_GPIO>;
++		};
++
++		gpio@10 {
++			reg = <10>;
++			type = <PCA955X_TYPE_GPIO>;
++		};
++
++		gpio@11 {
++			reg = <11>;
++			type = <PCA955X_TYPE_GPIO>;
++		};
++
++		gpio@12 {
++			reg = <12>;
++			type = <PCA955X_TYPE_GPIO>;
++		};
++
++		gpio@13 {
++			reg = <13>;
++			type = <PCA955X_TYPE_GPIO>;
++		};
++
++		gpio@14 {
++			reg = <14>;
++			type = <PCA955X_TYPE_GPIO>;
++		};
++
++		gpio@15 {
++			reg = <15>;
++			type = <PCA955X_TYPE_GPIO>;
++		};
++	};
++
++	power-supply@68 {
++		compatible = "ibm,cffps1";
++		reg = <0x68>;
++	};
++
++	power-supply@69 {
++		compatible = "ibm,cffps1";
++		reg = <0x69>;
++	};
++};
++
++&i2c4 {
++	status = "okay";
++
++	tmp423a@4c {
++		compatible = "ti,tmp423";
++		reg = <0x4c>;
++	};
++
++	ir35221@70 {
++		compatible = "infineon,ir35221";
++		reg = <0x70>;
++	};
++
++	ir35221@71 {
++		compatible = "infineon,ir35221";
++		reg = <0x71>;
++	};
++};
++
++
++&i2c5 {
++	status = "okay";
++
++	tmp423a@4c {
++		compatible = "ti,tmp423";
++		reg = <0x4c>;
++	};
++
++	ir35221@70 {
++		compatible = "infineon,ir35221";
++		reg = <0x70>;
++	};
++
++	ir35221@71 {
++		compatible = "infineon,ir35221";
++		reg = <0x71>;
++	};
++};
++
++&i2c9 {
++	status = "okay";
++
++	tmp275@4a {
++		compatible = "ti,tmp275";
++		reg = <0x4a>;
++	};
++};
++
++&i2c10 {
++	/* MUX
++	 *   -> PCIe Slot 3
++	 *   -> PCIe Slot 4
++	 */
++	status = "okay";
++};
++
++&i2c11 {
++	status = "okay";
++
++	pca9552: pca9552@60 {
++		compatible = "nxp,pca9552";
++		reg = <0x60>;
++		#address-cells = <1>;
++		#size-cells = <0>;
++		gpio-controller;
++		#gpio-cells = <2>;
++
++		gpio-line-names = "PS_SMBUS_RESET_N", "APSS_RESET_N",
++			"GPU0_TH_OVERT_N_BUFF",	"GPU1_TH_OVERT_N_BUFF",
++			"GPU2_TH_OVERT_N_BUFF", "GPU3_TH_OVERT_N_BUFF",
++			"GPU4_TH_OVERT_N_BUFF",	"GPU5_TH_OVERT_N_BUFF",
++			"GPU0_PWR_GOOD_BUFF", "GPU1_PWR_GOOD_BUFF",
++			"GPU2_PWR_GOOD_BUFF", "GPU3_PWR_GOOD_BUFF",
++			"GPU4_PWR_GOOD_BUFF", "GPU5_PWR_GOOD_BUFF",
++			"12V_BREAKER_FLT_N", "THROTTLE_UNLATCHED_N";
++
++		gpio@0 {
++			reg = <0>;
++			type = <PCA955X_TYPE_GPIO>;
++		};
++
++		gpio@1 {
++			reg = <1>;
++			type = <PCA955X_TYPE_GPIO>;
++		};
++
++		gpio@2 {
++			reg = <2>;
++			type = <PCA955X_TYPE_GPIO>;
++		};
++
++		gpio@3 {
++			reg = <3>;
++			type = <PCA955X_TYPE_GPIO>;
++		};
++
++		gpio@4 {
++			reg = <4>;
++			type = <PCA955X_TYPE_GPIO>;
++		};
++
++		gpio@5 {
++			reg = <5>;
++			type = <PCA955X_TYPE_GPIO>;
++		};
++
++		gpio@6 {
++			reg = <6>;
++			type = <PCA955X_TYPE_GPIO>;
++		};
++
++		gpio@7 {
++			reg = <7>;
++			type = <PCA955X_TYPE_GPIO>;
++		};
++
++		gpio@8 {
++			reg = <8>;
++			type = <PCA955X_TYPE_GPIO>;
++		};
++
++		gpio@9 {
++			reg = <9>;
++			type = <PCA955X_TYPE_GPIO>;
++		};
++
++		gpio@10 {
++			reg = <10>;
++			type = <PCA955X_TYPE_GPIO>;
++		};
++
++		gpio@11 {
++			reg = <11>;
++			type = <PCA955X_TYPE_GPIO>;
++		};
++
++		gpio@12 {
++			reg = <12>;
++			type = <PCA955X_TYPE_GPIO>;
++		};
++
++		gpio@13 {
++			reg = <13>;
++			type = <PCA955X_TYPE_GPIO>;
++		};
++
++		gpio@14 {
++			reg = <14>;
++			type = <PCA955X_TYPE_GPIO>;
++		};
++
++		gpio@15 {
++			reg = <15>;
++			type = <PCA955X_TYPE_GPIO>;
++		};
++	};
++
++	rtc@32 {
++		compatible = "epson,rx8900";
++		reg = <0x32>;
++	};
++
++	eeprom@51 {
++		compatible = "atmel,24c64";
++		reg = <0x51>;
++	};
++
++	ucd90160@64 {
++		compatible = "ti,ucd90160";
++		reg = <0x64>;
++	};
++};
++
++&i2c12 {
++	status = "okay";
++};
++
++&i2c13 {
++	status = "okay";
++};
++
++&vuart {
++	status = "okay";
++};
++
++&gfx {
++	status = "okay";
++	memory-region = <&gfx_memory>;
++};
++
++&pinctrl {
++	aspeed,external-nodes = <&gfx &lhc>;
++};
++
++&wdt1 {
++	aspeed,reset-type = "none";
++	aspeed,external-signal;
++	aspeed,ext-push-pull;
++	aspeed,ext-active-high;
++
++	pinctrl-names = "default";
++	pinctrl-0 = <&pinctrl_wdtrst1_default>;
++};
++
++&wdt2 {
++	aspeed,alt-boot;
++};
++
++&ibt {
++	status = "okay";
++};
++
++&adc {
++	status = "okay";
++};
++
++&vhub {
++	status = "okay";
++};
++
++&video {
++	status = "okay";
++	memory-region = <&video_engine_memory>;
++};
++
++#include "ibm-power9-dual.dtsi"
+-- 
+1.8.3.1
+
diff --git a/meta-witherspoon/recipes-kernel/linux/linux-aspeed_%.bbappend b/meta-witherspoon/recipes-kernel/linux/linux-aspeed_%.bbappend
index 1b09937..e41a430 100644
--- a/meta-witherspoon/recipes-kernel/linux/linux-aspeed_%.bbappend
+++ b/meta-witherspoon/recipes-kernel/linux/linux-aspeed_%.bbappend
@@ -1,2 +1,3 @@
 FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
 SRC_URI += "file://witherspoon.cfg"
+SRC_URI_append_witherspoon-128 = " file://0001-ARM-dts-Aspeed-Witherspoon-128-Update-BMC-partitioni.patch"