Change to /sys/bus/i2c/devices/... paths.
Per review comments, change device paths to symlinks thought to be more
stable.
Signed-off-by: Jim Wright <jlwright@us.ibm.com>
Change-Id: I2d676eabb17f56adf587d0d203478a0d8224cd2f
diff --git a/meta-witherspoon/recipes-phosphor/power/power-sequencer/swift/ucd90160.yaml b/meta-witherspoon/recipes-phosphor/power/power-sequencer/swift/ucd90160.yaml
index e146402..abb2ce3 100644
--- a/meta-witherspoon/recipes-phosphor/power/power-sequencer/swift/ucd90160.yaml
+++ b/meta-witherspoon/recipes-phosphor/power/power-sequencer/swift/ucd90160.yaml
@@ -1,7 +1,7 @@
- Device:
index: 0
# Linux sysfs path for this power sequencer (0xC8 8-bit address)
- path: /sys/devices/platform/ahb/ahb:apb/ahb:apb:bus@1e78a000/1e78a340.i2c-bus/i2c-8/8-0064
+ path: /sys/bus/i2c/devices/i2c-8/8-0064
RailNames:
- "12.0V"
- "3.3V"
@@ -52,7 +52,7 @@
GPIOAnalysis:
- type: gpuPGOOD
# The PCA9xxx chip device path and address (0xC0 8-bit = 0x60 7-bit)
- path: /sys/devices/platform/ahb/ahb:apb/ahb:apb:bus@1e78a000/1e78a340.i2c-bus/i2c-8/8-0060
+ path: /sys/bus/i2c/devices/i2c-8/8-0060
gpio_value: low # What GPIO value indicates a fault/problem?
error_function: gpuPGOODError # Extra analysis function to call for this type
option_flags: none
@@ -72,7 +72,7 @@
callout: /system/chassis/motherboard/gv100card3
- type: gpuOverTemp
# The PCA9xxx chip device path and address (0xC0 8-bit = 0x60 7-bit)
- path: /sys/devices/platform/ahb/ahb:apb/ahb:apb:bus@1e78a000/1e78a340.i2c-bus/i2c-8/8-0060
+ path: /sys/bus/i2c/devices/i2c-8/8-0060
gpio_value: low # What GPIO value indicates a fault/problem?
error_function: gpuOverTempError # Extra analysis function to call for this type
option_flags: shutdownOnFault
@@ -92,7 +92,7 @@
callout: /system/chassis/motherboard/gv100card3
- type: memGOOD0
# The PCA9xxx chip device path and address (0xE8 8-bit = 0x74 7-bit)
- path: /sys/devices/platform/ahb/ahb:apb/ahb:apb:bus@1e78a000/1e78a380.i2c-bus/i2c-9/9-0074
+ path: /sys/bus/i2c/devices/i2c-9/9-0074
gpio_value: low # What GPIO value indicates a fault/problem?
error_function: memGoodError # Extra analysis function to call for this type
option_flags: none
@@ -136,7 +136,7 @@
callout: /system/chassis/motherboard/dimm6
- type: memGOOD1
# The PCA9xxx chip device path and address (0xE8 8-bit = 0x74 7-bit)
- path: /sys/devices/platform/ahb/ahb:apb/ahb:apb:bus@1e78a000/1e78a3c0.i2c-bus/i2c-10/10-0074
+ path: /sys/bus/i2c/devices/i2c-10/10-0074
gpio_value: low # What GPIO value indicates a fault/problem?
error_function: memGoodError # Extra analysis function to call for this type
option_flags: none