diff --git a/meta-witherspoon/recipes-phosphor/power/power-sequencer/swift/ucd90160.yaml b/meta-witherspoon/recipes-phosphor/power/power-sequencer/swift/ucd90160.yaml
new file mode 100644
index 0000000..d6ba581
--- /dev/null
+++ b/meta-witherspoon/recipes-phosphor/power/power-sequencer/swift/ucd90160.yaml
@@ -0,0 +1,92 @@
+- Device:
+  index: 0
+  # Linux sysfs path for this power sequencer (0xC8 8-bit address)
+  path:  /sys/devices/platform/ahb/ahb:apb/ahb:apb:bus@1e78a000/1e78a400.i2c-bus/i2c-8/8-0064
+  RailNames:
+      - "12.0V"
+      - "3.3V"
+      - "1.8V"
+      - "1.1V"
+      - "0.8V_SW"
+      - "5.0V"
+      - "VDN0"
+      - "VDN1"
+      - "AVDD"
+      - "VIO0"
+      - "VIO1"
+      - "VDD0"
+      - "VDD1"
+      - "VCS0"
+      - "VCS1"
+  GPIConfigs:
+      - name:            PGOOD_5P0V
+        gpi:             1
+        pinID:           8
+        poll:            false
+        analysis:        none
+      - name:            MEM_GOOD0
+        gpi:             2
+        pinID:           9
+        poll:            false
+        analysis:        none
+      - name:            MEM_GOOD1
+        gpi:             3
+        pinID:           10
+        poll:            false
+        analysis:        none
+      - name:            GPU_PGOOD
+        gpi:             4
+        pinID:           14
+        poll:            false
+        analysis:        gpuPGOOD # Extra GPIOAnalysis to run if faulted
+      - name:            GPU_TH_OVERT
+        gpi:             5
+        pinID:           17
+        poll:            false
+        analysis:        gpuOverTemp # Extra GPIOAnalysis to run if faulted
+      - name:            SOFTWARE_PGOOD
+        gpi:             6
+        pinID:           11
+        poll:            false
+        analysis:        none
+  GPIOAnalysis:
+      - type:            gpuPGOOD
+        # The PCA9xxx chip device path and address (0xC0 8-bit = 0x60 7-bit)
+        path:            /sys/devices/platform/ahb/ahb:apb/ahb:apb:bus@1e78a000/1e78a400.i2c-bus/i2c-8/8-0060
+        gpio_value:      low # What GPIO value indicates a fault/problem?
+        error_function:  gpuPGOODError # Extra analysis function to call for this type
+        option_flags:    none
+        GPIODefinitions:
+            - GPIODefinition: GPU Card 0
+              gpio:      8 # GPIO pin/register to check for fault
+              # Call out path for fault
+              callout:   /system/chassis/motherboard/gv100card0
+            - GPIODefinition: GPU Card 1
+              gpio:      9
+              callout:   /system/chassis/motherboard/gv100card1
+            - GPIODefinition: GPU Card 2
+              gpio:      10
+              callout:   /system/chassis/motherboard/gv100card2
+            - GPIODefinition: GPU Card 3
+              gpio:      11
+              callout:   /system/chassis/motherboard/gv100card3
+      - type:            gpuOverTemp
+        # The PCA9xxx chip device path and address (0xC0 8-bit = 0x60 7-bit)
+        path:            /sys/devices/platform/ahb/ahb:apb/ahb:apb:bus@1e78a000/1e78a400.i2c-bus/i2c-8/8-0060
+        gpio_value:      low # What GPIO value indicates a fault/problem?
+        error_function:  gpuOverTempError # Extra analysis function to call for this type
+        option_flags:    shutdownOnFault
+        GPIODefinitions:
+            - GPIODefinition: GPU Card 0 Overtemperature
+              gpio:      2 # GPIO pin/register to check for fault
+              # Call out path for fault
+              callout:   /system/chassis/motherboard/gv100card0
+            - GPIODefinition: GPU Card 1 Overtemperature
+              gpio:      3
+              callout:   /system/chassis/motherboard/gv100card1
+            - GPIODefinition: GPU Card 2 Overtemperature
+              gpio:      4
+              callout:   /system/chassis/motherboard/gv100card2
+            - GPIODefinition: GPU Card 3 Overtemperature
+              gpio:      5
+              callout:   /system/chassis/motherboard/gv100card3