commit d95d6afadd61c6ab8276736d719682775d7880d0
author Adriana Kobylak <anoo@us.ibm.com> Tue Mar 19 10:40:36 2019 -0500
committer Brad Bishop <bradleyb@fuzziesquirrel.com> Fri Apr 26 13:34:30 2019 +0000
tree 09d30593017254427631309cc6b758af253bb1ca
parent 160a82111e5ee12066204d71bdbcb6be580e897b

avsbus-control: Add system-specific scripts

The avsbus-control scripts differ between different machine
configurations. Rename the existing ones to witherspoon-* and
add the swift-* ones. Install the appropriate script depending
on the machine being built.

Tested: Built swift and witherspoon and verified that the scripts
        rootfs/usr/bin/ were the ones for the machine being built.

Change-Id: If6a223f2972680769d526c0ef53cf5ca82337721
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>

meta-witherspoon/recipes-phosphor/chassis/avsbus-control/swift-avsbus-enable.sh

diff --git a/meta-witherspoon/recipes-phosphor/chassis/avsbus-control/swift-avsbus-enable.sh b/meta-witherspoon/recipes-phosphor/chassis/avsbus-control/swift-avsbus-enable.sh
new file mode 100644
index 0000000..d384091
--- /dev/null
+++ b/meta-witherspoon/recipes-phosphor/chassis/avsbus-control/swift-avsbus-enable.sh
@@ -0,0 +1,25 @@
+#!/bin/sh
+# For each AVSBus attached power rail set the default boot voltage and then
+# program the OPERATION register to switch to AVSBus mode and update default
+# start voltage to what was last programmed in VOUT_COMMAND. This should be run
+# before power-on. This is platform specific settings that must be
+# updated/removed if not Swift.
+
+i2cset -y 9 0x70 0x00 0x00 b    # VDD 0  - PAGE set
+i2cset -y 9 0x70 0x21 0xE6 0x00 i    # VDD 0  - Set default HW boot voltage to 0.9V
+i2cset -y 9 0x70 0x01 0xB0 b    # VDD 0
+i2cset -y 9 0x71 0x00 0x01 b    # VCS 0  - PAGE set
+i2cset -y 9 0x71 0x21 0x00 0x01 i    # VCS 0  - Set default HW boot voltage to 1.0V
+i2cset -y 9 0x71 0x01 0xB0 b    # VCS 0
+i2cset -y 9 0x71 0x00 0x00 b    # VDN 0  - PAGE set
+i2cset -y 9 0x71 0x21 0xCD 0x00 i    # VDN 0  - Set default HW boot voltage to 0.8V
+i2cset -y 9 0x71 0x01 0xB0 b    # VDN 0
+i2cset -y 10 0x70 0x00 0x00 b    # VDD 1  - PAGE set
+i2cset -y 10 0x70 0x21 0xE6 0x00 i    # VDD 1  - Set default HW boot voltage to 0.9V
+i2cset -y 10 0x70 0x01 0xB0 b    # VDD 1
+i2cset -y 10 0x71 0x00 0x01 b    # VCS 1  - PAGE set
+i2cset -y 10 0x71 0x21 0x00 0x01 i    # VCS 1  - Set default HW boot voltage to 1.0V
+i2cset -y 10 0x71 0x01 0xB0 b    # VCS 1
+i2cset -y 10 0x71 0x00 0x00 b    # VDN 1  - PAGE set
+i2cset -y 10 0x71 0x21 0xCD 0x00 i   # VDN 1  - Set default HW boot voltage to 0.8V
+i2cset -y 10 0x71 0x01 0xB0 b    # VDN 1