diff --git a/meta-msn/recipes-phosphor/initfs/files/recovery.sh b/meta-msn/recipes-phosphor/initfs/files/recovery.sh
new file mode 100644
index 0000000..256e18f
--- /dev/null
+++ b/meta-msn/recipes-phosphor/initfs/files/recovery.sh
@@ -0,0 +1,52 @@
+
+#!/bin/sh
+#
+# Script to burn entire 32MB of BMC SPI Flash 1
+#
+# Usage:
+#    a) Local: /run/initramfs/recovery <bmc-image-file>
+#
+# Assumptions:
+#    <bmc-image-file> is a 32MB file representing all partitions in BMC SPI Flash
+#    <bmc-image-file> exists on local filesystem
+#    /dev/mtd0 represents entire BMC SPI Flash device
+#    /dev/mtd5 is a JFFS2 filesystem (rwfs) partition
+#    /bsp/reset/bmc_upgrade is symlink pointing to proper sticky bit in CPLD
+#
+
+if [ -f $1 ]
+then
+   echo $0: Update BMC SPI Flash with $1
+else
+   echo $0: File $1 not found on target, exiting
+   exit
+fi
+
+echo $0: Remounting rwfs "(/dev/mtd5)" as read-only
+mount /dev/mtdblock5 /run/initramfs/rw -t jffs2 -o remount,ro
+
+echo $0: Unmounting rofs "(/dev/mtd4)"
+umount /dev/mtdblock4
+
+devmem 0x1e785034 l 0x01;
+
+MAC=`fw_printenv ethaddr | sed -n "s/^ethaddr=//p"`
+
+echo $0: Burning SPI Flash "(/dev/mtd0)" with image "$1"
+/usr/sbin/flashcp -v $1 /dev/mtd0
+
+if [ -v $MAC ]; then
+	echo "MAC env variable not exist. Set eth0 MAC from eeprom."
+	MAC=`hexdump -n 6 -s 0xf0 -v -e '/1 "%02x:"' /sys/bus/i2c/devices/6-0055/eeprom`;MAC=${MAC::-1};
+else
+	echo "MAC env variable exist. Set eth0 MAC from env."
+fi;
+
+fw_setenv ethaddr $MAC
+
+echo $0: Setting bmc_upgrade sticky bit in CPLD
+echo 1 > /bsp/reset/bmc_upgrade
+
+echo $0: Rebooting BMC
+echo 0 > /bsp/reset/bmc_reset_soft
+