meta-nuvoton: generate full flash image.
Nuvoton's full flash image includes also a bootloader called Bootblock,
and headers for it and for the u-boot. Generating headers and merging
the Bootblock and the u-boot are being done by Nuvoton's binary
generator tool (Bingo), which uses external paramteres from XML files
for that.
Change-Id: Idcd7ab42fa358e44d3908410d6913d4a915d5faa
Signed-off-by: Oshri Alkoby (NTIL) <oshri.alkoby@nuvoton.com>
diff --git a/recipes-bsp/images/files/BootBlockAndHeader_EB.xml b/recipes-bsp/images/files/BootBlockAndHeader_EB.xml
new file mode 100644
index 0000000..03deb30
--- /dev/null
+++ b/recipes-bsp/images/files/BootBlockAndHeader_EB.xml
@@ -0,0 +1,276 @@
+<!-- SPDX-License-Identifier: GPL-2.0
+#
+# Nuvoton IGPS: Image Generation And Programming Scripts For Poleg BMC
+#
+# Copyright (C) 2018 Nuvoton Technologies, All Rights Reserved
+#--------------------------------------------------------------------------->
+
+<?xml version="1.0" encoding="UTF-8"?>
+
+<Bin_Ecc_Map>
+ <!-- BMC mandatory fields -->
+ <ImageProperties>
+ <BinSize>0</BinSize> <!-- If 0 the binary size will be calculated by the tool -->
+ <PadValue>0xFF</PadValue> <!-- Byte value to pad the empty areas, default is 0 -->
+ </ImageProperties>
+
+ <BinField>
+ <!-- BootBlock tag (0x50 0x07 0x55 0xAA 0x54 0x4F 0x4F 0x42) or
+ uboot tag (0x55 0x42 0x4F 0x4F 0x54 0x42 0x4C 0x4B) -->
+ <name>StartTag</name> <!-- name of field -->
+ <config>
+ <offset>0</offset>
+ <size>0x8</size>
+ </config>
+ <content format='bytes'>0x50 0x07 0x55 0xAA 0x54 0x4F 0x4F 0x42</content> <!-- content the user should fill -->
+ </BinField>
+
+ <BinField>
+ <!-- Code destination address, 32-bit aligned: for BootBlock should be 0xFFFD5E00 so code will run in 0xFFFD6000 as linked for -->
+ <name>DestAddr</name> <!-- name of field -->
+ <config>
+ <offset>0x140</offset>
+ <size>0x4</size>
+ </config>
+ <content format='32bit'>0xFFFD5E00</content> <!-- content the user should fill -->
+ </BinField>
+
+ <BinField>
+ <!-- BootBlock or u-boot Code size -->
+ <name>CodeSize</name> <!-- name of field -->
+ <config>
+ <offset>0x144</offset>
+ <size>0x4</size>
+ </config>
+ <content format='FileSize'>Poleg_bootblock.bin</content> <!-- content the user should fill -->
+ </BinField>
+
+ <BinField>
+ <!-- The BootBlock or u-boot binary file -->
+ <name>Code</name> <!-- name of field -->
+ <config>
+ <offset>0x200</offset>
+ <size format='FileSize'>Poleg_bootblock.bin</size> <!-- size in the header calculated by tool-->
+ </config>
+ <content format='FileContent'>Poleg_bootblock.bin</content> <!-- content the user should fill -->
+ </BinField>
+
+ <!-- BMC optional fields -->
+ <BinField>
+ <!-- Word contents copied by ROM code to FIU0 FIU_DRD_CFG register -->
+ <name>FIU0_DRD_CFG_Set</name> <!-- name of field -->
+ <config>
+ <offset>0x108</offset>
+ <size>0x4</size>
+ </config>
+ <content format='32bit'>0x030011BB</content> <!-- content the user should fill -->
+ </BinField>
+
+ <BinField>
+ <!-- Defines the clock divide ratio from AHB to FIU0 clock -->
+ <name>FIU_Clk_Divider</name> <!-- name of field -->
+ <config>
+ <offset>0x10C</offset>
+ <size>0x1</size>
+ </config>
+ <content format='bytes'>4</content> <!-- content the user should fill -->
+ </BinField>
+
+ <BinField>
+ <!-- Version (Major.Minor) -->
+ <name>Version</name> <!-- name of field -->
+ <config>
+ <offset>0x148</offset>
+ <size>0x4</size>
+ </config>
+ <content format='32bit'>0x0201</content> <!-- content the user should fill -->
+ </BinField>
+
+ <BinField>
+ <!-- Board manufaturer ( Dell = 0, Nuvoton = 100, Google = 1, MS = 2) -->
+ <name>BOARD_VENDOR</name> <!-- name of field -->
+ <config>
+ <offset>0x14C</offset>
+ <size>0x4</size>
+ </config>
+ <content format='32bit'>100</content> <!--Board_manufacturer: Nuvoton-->
+ </BinField>
+ <BinField>
+ <!-- Board type ( DRB = 0, SVB = 1, EB = 2,HORIZON = 3, SANDSTORM = 4, ROCKAWAY = 100 RunBMC = 10) -->
+ <!-- WARNING: Currently this value is only printed to serial. Set BOARD_VENDOR to 1 get Dell specific customization. -->
+ <name>BOARD_TYPE</name> <!-- name of field -->
+ <config>
+ <offset>0x150</offset>
+ <size>0x4</size>
+ </config>
+ <content format='32bit'>0x02</content> <!--Board_type: EB-->
+ </BinField>
+
+ <!-- the next two fields are available since version 10.7.0 -->
+ <BinField>
+ <!-- supported values: 333,444,500,600,666,700,720,750,775,787,800,825,850,900,950,1000,1060 -->
+ <name>MC_FREQ_IN_MHZ</name> <!-- name of field -->
+ <config>
+ <offset>0x11C</offset>
+ <size>0x2</size>
+ </config>
+ <content format='32bit'>800</content>
+ </BinField>
+ <BinField>
+ <!-- supporeted values: 333,500,600,666,700,720,750,800,825,850,900,950,1000,1060 -->
+ <name>CPU_FREQ_IN_MHZ</name> <!-- name of field -->
+ <config>
+ <offset>0x154</offset>
+ <size>0x2</size>
+ </config>
+ <content format='32bit'>800</content>
+ </BinField>
+
+ <BinField>
+ <!-- MC_CONFIG.
+ Bit 0: MC_DISABLE_CAPABILITY_INPUT_DQS_ENHANCE_TRAINING (0x01)
+ Bit 1: MC_CAPABILITY_IGNORE_ECC_DEVICE (0x02) -->
+ <name>MC_CONFIG</name> <!-- name of field -->
+ <config>
+ <offset>0x156</offset>
+ <size>0x1</size>
+ </config>
+ <content format='32bit'>0x00</content>
+ </BinField>
+
+ <BinField>
+ <!-- HOST_IF.
+ 0xFF: LPC backward compatible
+ 0x00: LPC.
+ 0x01: eSPI
+ 0x02: GPIOs TRIS. -->
+ <name>HOST_IF</name> <!-- name of field -->
+ <config>
+ <offset>0x157</offset>
+ <size>0x1</size>
+ </config>
+ <content format='32bit'>0x00</content>
+ </BinField>
+
+ <BinField>
+ <!-- SECURITY_LEVEL_T.
+ 0xFF: SECURITY_LEVEL_UNKNOWN: backward compatible
+ 0x00: SECURITY_LEVEL_NONE.
+ 0x01: SECURITY_LEVEL_STANDARD
+ 0x02: SECURITY_LEVEL_NIST. (require BootBlock with NIST support) -->
+ <name>SECURITY_LEVEL_T</name> <!-- name of field -->
+ <config>
+ <offset>0x15C</offset>
+ <size>0x1</size>
+ </config>
+ <content format='32bit'>0xFF</content>
+ </BinField>
+
+ <BinField>
+ <!-- Key revoke (bitwise). Set bit 0 to revoke key 0 etc. -->
+ <name>SECURITY_REVOKE_KEYS</name> <!-- name of field -->
+ <config>
+ <offset>0x1D7</offset>
+ <size>0x1</size>
+ </config>
+ <content format='bytes'>0x00</content>
+ </BinField>
+
+ <BinField>
+ <!-- security log offset -->
+ <name>SECURITY_LOG</name> <!-- name of field -->
+ <config>
+ <offset>0x1D8</offset>
+ <size>0x4</size>
+ </config>
+ <content format='32bit'>0x090000</content>
+ </BinField>
+ <BinField>
+ <!-- hole 0 size: used for NIST security. -->
+ <name>SECURITY_LOG_SIZE</name> <!-- name of field -->
+ <config>
+ <offset>0x1DC</offset>
+ <size>0x4</size>
+ </config>
+ <content format='32bit'>0x3000</content>
+ </BinField>
+
+
+ <BinField>
+ <!-- hole 0: used for NIST security. -->
+ <name>HOLE0</name> <!-- name of field -->
+ <config>
+ <offset>0x1E0</offset>
+ <size>0x4</size>
+ </config>
+ <content format='32bit'>0x0A0000</content>
+ </BinField>
+ <BinField>
+ <!-- hole 0 size: used for NIST security. -->
+ <name>HOLE0_SIZE</name> <!-- name of field -->
+ <config>
+ <offset>0x1E4</offset>
+ <size>0x4</size>
+ </config>
+ <content format='32bit'>0xF70000</content>
+ </BinField>
+
+ <BinField>
+ <!-- hole 1: used for NIST security. -->
+ <name>HOLE1</name> <!-- name of field -->
+ <config>
+ <offset>0x1E8</offset>
+ <size>0x4</size>
+ </config>
+ <content format='32bit'>0</content>
+ </BinField>
+ <BinField>
+ <!-- hole 1 size: used for NIST security. -->
+ <name>HOLE1_SIZE</name> <!-- name of field -->
+ <config>
+ <offset>0x1EC</offset>
+ <size>0x4</size>
+ </config>
+ <content format='32bit'>0</content>
+ </BinField>
+
+
+ <BinField>
+ <!-- hole 2: used for NIST security. -->
+ <name>HOLE2</name> <!-- name of field -->
+ <config>
+ <offset>0x1F0</offset>
+ <size>0x4</size>
+ </config>
+ <content format='32bit'>0xFFFFFFFF</content>
+ </BinField>
+ <BinField>
+ <!-- hole 2 size: used for NIST security. -->
+ <name>HOLE2_SIZE</name> <!-- name of field -->
+ <config>
+ <offset>0x1F4</offset>
+ <size>0x4</size>
+ </config>
+ <content format='32bit'>0</content>
+ </BinField>
+
+ <BinField>
+ <!-- hole 3: used for NIST security. -->
+ <name>HOLE3</name> <!-- name of field -->
+ <config>
+ <offset>0x1F8</offset>
+ <size>0x4</size>
+ </config>
+ <content format='32bit'>0</content>
+ </BinField>
+ <BinField>
+ <!-- hole 3 size: used for NIST security. -->
+ <name>HOLE3_SIZE</name> <!-- name of field -->
+ <config>
+ <offset>0x1FC</offset>
+ <size>0x4</size>
+ </config>
+ <content format='32bit'>0</content>
+ </BinField>
+
+</Bin_Ecc_Map>