u-boot-nuvoton: srcrev bump adb4ac1af3...6870e66f6b

This includes bug fixs, pinctrl driver and npcm730/gis/gbs dts.

Avi Fishman (6):
      board: nuvoton: poleg: fix dram size for 2GB would configure to 128MB
      npcm: clean warnings
      ARM: npcm7xx: add registers gcr
      configs: npcm7xx: add MEMTEST command
      npcm7xx: fix: L2 cache invalidate 16 ways
      configs: npcm7xx: add CONFIG_HUSH_PARSER command

Brian Ma (5):
      npcm7xx: runbmc: buv: add DTS for BUV board
      driver: emc: add fixed phy support
      arch: arm: dts: remove BUV unused emc/gmac
      dts: npcm7xx: add common and pincfg dtsi
      arch: npcm750: reset: workaround BUV get CORSR when PORST

Fran Hsu (3):
      Add 'CONFIG_SYS_MEM_TOP_HIDE' to Poleg minimal defconfig.
      Commit u-boot DTS files for the GIS project.
      u-boot: GIS system dts update.

George Hung (5):
      dts: npcm730 GBS: add dts/pinctrl support
      dts:npcm730 GBS: add the missing GPIs initial
      dts: npcm730 GBS: add event clear to GPIO59
      dts: npcm730 GBS: add event clear to some GPIs and init GPIO74
      dts: npcm730 GBS: fix the GPIO91 setting

Joseph Liu (20):
      npcm7xx: runbmc: set the graphic reset delay value
      arch: arm: dts: add nuvoton-npcm750-olympus dts file
      board: nuvoton: poleg: init board by machine name
      board: nuvoton: poleg: olympus: remove reset control
      arch: arm: cpu: npcm750: correct cpu info
      arch: arm: npcm750: add get reboot reason
      drivers: pinctrl: add npcm7xx pinctrl driver
      dts: add nuvoton-npcm7xx-pinctrl.dtsi
      dts: npcm750 olympus: add pinctrl support
      dts: npcm750 evb: add pinctrl support
      board: nuvoton: poleg: remove mfsel settings
      drivers: nuvoton: remove mfsel configs
      doc: nuvoton npcm7xx introduce pinctrl device tree binding
      driver: pinctrl: npcm7xx: add event clear support
      driver: pinctrl: npcm7xx: corrects input setting
      driver: pinctrl: npcm7xx: corrects persist state
      driver: pinctrl: npcm7xx: corrects polarity setting
      Revert "driver: pinctrl: npcm7xx: corrects persist state"
      configs: runbmc: add hush parser and mtest command
      cmd: standalone test: support at least one test

Kun Yi (3):
      nuvoton: poleg.h: Add kernel reboot on oops/panic to bootargs
      npcm7xx: defconfig: Branch and remove unneeded functions
      dts: Add DTS for NPCM730

Medad CChien (3):
      u-boot: Support MFG Test
      u-boot: Add config to enable saving log in header
      u-boot: mfg test: Remove saving mtest result

Stanley Chu (1):
      npcm7xx: allow to config SYS_MEM_TOP_HIDE by defconfig

Change-Id: If90375b92b67969018176d0578cf764f21bda5a8
Signed-off-by: Joseph Liu <kwliu@nuvoton.com>
1 file changed
tree: 0831fbfdf8dfdeba864809220f6f65e9553a137c
  1. conf/
  2. recipes-bsp/
  3. recipes-kernel/
  4. recipes-nuvoton/
  5. COPYING.apache-2.0
  6. COPYING.MIT
  7. LICENSE
  8. MAINTAINERS
  9. README.md
  10. recipes.txt
README.md

Nuvoton NPCM7XX

This is the Nuvoton NPCM7XX Board Support Package (BSP) layer. The NPCM7XX is an ARM based SoC with external DDR RAM and supports a large set of peripherals made by Nuvoton. More information about the NPCM7XX can be found here.