| commit | 60c98b0efbb07bb2ebb6457acc8670a81e1c69c7 | [log] [tgz] |
|---|---|---|
| author | Matthew Barth <msbarth@us.ibm.com> | Tue Jan 02 15:28:29 2018 -0600 |
| committer | Brad Bishop <bradleyb@fuzziesquirrel.com> | Thu Feb 01 14:53:59 2018 +0000 |
| tree | dd2fd86e320b833e051d7e6c64454d548df5d396 | |
| parent | 2bd89ac66c396c44efebe4ed8483165e7622566d [diff] |
wspoon: Increase watchdog timeout Increasing the watchdog timeout to 10sec to allow dynamic fan speed changes to continue until a BMC performance issue is resolved. The watchdog wasn't being pinged within the original 3 seconds. This would cause the fans to run at 100% PWM and eventually be marked nonfunction resulting in a system being shutdown. Temporarily, marking a fan nonfunctional when it's tach feedback speed is above the target speed for witherspoon has been removed. This would keep the system from being shutdown, however the fans are no longer under dynamic speed control after the watchdog trips. Increasing the watchdog timeout to 10sec prolongs dynamic fan speed control staying active. If the watchdog trips, issuing a reboot will allow dynamic fan speed control again. Change-Id: I6e52892a2c6228fd5175dc2d279a947554423221 Signed-off-by: Matthew Barth <msbarth@us.ibm.com>
meta-openpower is the OpenPOWER layer and should be included in all OpenPOWER systems' bblayers.conf. More information on OpenPOWER can be found here.