uboot tftp can not handle noise
Pull in the fixes that allows netbooting to work well
Without this change netbooting was impossible due to
timeout problems downloading images for netbooting.
Sometimes I would get timeouts right away, other times
it would take longer but every time it fail to copy
the file completely before timeouts would hit.
diff --git a/common/recipes-bsp/u-boot/files/0001-am335x_evm.h-Add-use-DEFAULT_LINUX_BOOT_ENV-environm.patch b/common/recipes-bsp/u-boot/files/0001-am335x_evm.h-Add-use-DEFAULT_LINUX_BOOT_ENV-environm.patch
deleted file mode 100644
index 77e35bb..0000000
--- a/common/recipes-bsp/u-boot/files/0001-am335x_evm.h-Add-use-DEFAULT_LINUX_BOOT_ENV-environm.patch
+++ /dev/null
@@ -1,74 +0,0 @@
-From 5701384cea4a829b772bf7a96a74825b58c22385 Mon Sep 17 00:00:00 2001
-From: Denys Dmytriyenko <denys@ti.com>
-Date: Thu, 17 Apr 2014 12:25:40 -0400
-Subject: [PATCH] am335x_evm.h: Add, use DEFAULT_LINUX_BOOT_ENV environment
- string
-
-Modified version of the patch currently being reviewed for mainline:
-http://patchwork.ozlabs.org/patch/334861/
-
-To deal with a reoccurring problem properly we need to specify addresses
-for the Linux kernel, Flatted Device Tree and ramdisk that obey the
-constraints within the kernel's Documentation/arm/Booting file but also
-make sure that we relocate things within a valid address range.
-
-Signed-off-by: Denys Dmytriyenko <denys@ti.com>
-Signed-off-by: Tom Rini <trini@ti.com>
-
-Upstream-Status: Pending
----
- include/configs/am335x_evm.h | 31 ++++++++++++++++++++++++++-----
- 1 file changed, 26 insertions(+), 5 deletions(-)
-
-diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
-index c5a6d4b..01e32b3 100644
---- a/include/configs/am335x_evm.h
-+++ b/include/configs/am335x_evm.h
-@@ -54,10 +54,7 @@
- #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
- #ifndef CONFIG_SPL_BUILD
- #define CONFIG_EXTRA_ENV_SETTINGS \
-- "loadaddr=0x80200000\0" \
-- "fdtaddr=0x80F80000\0" \
-- "fdt_high=0xffffffff\0" \
-- "rdaddr=0x81000000\0" \
-+ DEFAULT_LINUX_BOOT_ENV \
- "bootdir=/boot\0" \
- "bootfile=uImage\0" \
- "fdtfile=undefined\0" \
-@@ -197,7 +194,31 @@
- #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START \
- + (8 * 1024 * 1024))
-
--#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default load address */
-+/*
-+ * Our DDR memory always starts at 0x80000000 and U-Boot shall have
-+ * relocated itself to higher in memory by the time this value is used.
-+ * However, set this to a 32MB offset to allow for easier Linux kernel
-+ * booting as the default is often used as the kernel load address.
-+ */
-+#define CONFIG_SYS_LOAD_ADDR 0x82000000 /* Default load address */
-+
-+/*
-+ * We setup defaults based on constraints from the Linux kernel, which should
-+ * also be safe elsewhere. We have the default load at 32MB into DDR (for
-+ * the kernel), FDT above 128MB (the maximum location for the end of the
-+ * kernel), and the ramdisk 512KB above that (allowing for hopefully never
-+ * seen large trees). We say all of this must be within the first 256MB
-+ * as that will normally be within the kernel lowmem and thus visible via
-+ * bootm_size and we only run on platforms with 256MB or more of memory.
-+ */
-+#define DEFAULT_LINUX_BOOT_ENV \
-+ "loadaddr=0x82000000\0" \
-+ "kernel_addr_r=0x82000000\0" \
-+ "fdtaddr=0x88000000\0" \
-+ "fdt_addr_r=0x88000000\0" \
-+ "rdaddr=0x88080000\0" \
-+ "ramdisk_addr_r=0x88080000\0" \
-+ "bootm_size=0x10000000\0"
-
- #define CONFIG_MMC
- #define CONFIG_GENERIC_MMC
---
-1.9.2
-
diff --git a/common/recipes-bsp/u-boot/u-boot_2013.07.bb b/common/recipes-bsp/u-boot/u-boot_2013.07.bb
index f3e2f56..80715e7 100644
--- a/common/recipes-bsp/u-boot/u-boot_2013.07.bb
+++ b/common/recipes-bsp/u-boot/u-boot_2013.07.bb
@@ -12,13 +12,12 @@
# This revision corresponds to the tag "v2013.07"
# We use the revision in order to avoid having to fetch it from the repo during parse
-SRCREV = "62c175fbb8a0f9a926c88294ea9f7e88eb898f6c"
+SRCREV = "${AUTOREV}"
PV = "v2013.07+git${SRCPV}"
-SRC_URI = "git://git.denx.de/u-boot.git;branch=master \
- file://0001-am335x_evm.h-Add-use-DEFAULT_LINUX_BOOT_ENV-environm.patch \
- "
+UBRANCH = "v2013.07-aspeed-openbmc"
+SRC_URI = "git://git@github.com/openbmc/u-boot.git;branch=${UBRANCH};protocol=https"
S = "${WORKDIR}/git"