diff --git a/common/recipes-bsp/u-boot/files/0001-am335x_evm.h-Add-use-DEFAULT_LINUX_BOOT_ENV-environm.patch b/common/recipes-bsp/u-boot/files/0001-am335x_evm.h-Add-use-DEFAULT_LINUX_BOOT_ENV-environm.patch
deleted file mode 100644
index 77e35bb..0000000
--- a/common/recipes-bsp/u-boot/files/0001-am335x_evm.h-Add-use-DEFAULT_LINUX_BOOT_ENV-environm.patch
+++ /dev/null
@@ -1,74 +0,0 @@
-From 5701384cea4a829b772bf7a96a74825b58c22385 Mon Sep 17 00:00:00 2001
-From: Denys Dmytriyenko <denys@ti.com>
-Date: Thu, 17 Apr 2014 12:25:40 -0400
-Subject: [PATCH] am335x_evm.h: Add, use DEFAULT_LINUX_BOOT_ENV environment
- string
-
-Modified version of the patch currently being reviewed for mainline:
-http://patchwork.ozlabs.org/patch/334861/
-
-To deal with a reoccurring problem properly we need to specify addresses
-for the Linux kernel, Flatted Device Tree and ramdisk that obey the
-constraints within the kernel's Documentation/arm/Booting file but also
-make sure that we relocate things within a valid address range.
-
-Signed-off-by: Denys Dmytriyenko <denys@ti.com>
-Signed-off-by: Tom Rini <trini@ti.com>
-
-Upstream-Status: Pending
----
- include/configs/am335x_evm.h | 31 ++++++++++++++++++++++++++-----
- 1 file changed, 26 insertions(+), 5 deletions(-)
-
-diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
-index c5a6d4b..01e32b3 100644
---- a/include/configs/am335x_evm.h
-+++ b/include/configs/am335x_evm.h
-@@ -54,10 +54,7 @@
- #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
- #ifndef CONFIG_SPL_BUILD
- #define CONFIG_EXTRA_ENV_SETTINGS \
--	"loadaddr=0x80200000\0" \
--	"fdtaddr=0x80F80000\0" \
--	"fdt_high=0xffffffff\0" \
--	"rdaddr=0x81000000\0" \
-+	DEFAULT_LINUX_BOOT_ENV \
- 	"bootdir=/boot\0" \
- 	"bootfile=uImage\0" \
- 	"fdtfile=undefined\0" \
-@@ -197,7 +194,31 @@
- #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START \
- 					+ (8 * 1024 * 1024))
- 
--#define CONFIG_SYS_LOAD_ADDR		0x81000000 /* Default load address */
-+/*
-+ * Our DDR memory always starts at 0x80000000 and U-Boot shall have
-+ * relocated itself to higher in memory by the time this value is used.
-+ * However, set this to a 32MB offset to allow for easier Linux kernel
-+ * booting as the default is often used as the kernel load address.
-+ */
-+#define CONFIG_SYS_LOAD_ADDR		0x82000000 /* Default load address */
-+
-+/*
-+ * We setup defaults based on constraints from the Linux kernel, which should
-+ * also be safe elsewhere.  We have the default load at 32MB into DDR (for
-+ * the kernel), FDT above 128MB (the maximum location for the end of the
-+ * kernel), and the ramdisk 512KB above that (allowing for hopefully never
-+ * seen large trees).  We say all of this must be within the first 256MB
-+ * as that will normally be within the kernel lowmem and thus visible via
-+ * bootm_size and we only run on platforms with 256MB or more of memory.
-+ */
-+#define DEFAULT_LINUX_BOOT_ENV \
-+	"loadaddr=0x82000000\0" \
-+	"kernel_addr_r=0x82000000\0" \
-+	"fdtaddr=0x88000000\0" \
-+	"fdt_addr_r=0x88000000\0" \
-+	"rdaddr=0x88080000\0" \
-+	"ramdisk_addr_r=0x88080000\0" \
-+	"bootm_size=0x10000000\0"
- 
- #define CONFIG_MMC
- #define CONFIG_GENERIC_MMC
--- 
-1.9.2
-
diff --git a/common/recipes-bsp/u-boot/u-boot_2013.07.bb b/common/recipes-bsp/u-boot/u-boot_2013.07.bb
index f3e2f56..80715e7 100644
--- a/common/recipes-bsp/u-boot/u-boot_2013.07.bb
+++ b/common/recipes-bsp/u-boot/u-boot_2013.07.bb
@@ -12,13 +12,12 @@
 
 # This revision corresponds to the tag "v2013.07"
 # We use the revision in order to avoid having to fetch it from the repo during parse
-SRCREV = "62c175fbb8a0f9a926c88294ea9f7e88eb898f6c"
+SRCREV = "${AUTOREV}"
 
 PV = "v2013.07+git${SRCPV}"
 
-SRC_URI = "git://git.denx.de/u-boot.git;branch=master \
-          file://0001-am335x_evm.h-Add-use-DEFAULT_LINUX_BOOT_ENV-environm.patch \
-          "
+UBRANCH = "v2013.07-aspeed-openbmc"
+SRC_URI = "git://git@github.com/openbmc/u-boot.git;branch=${UBRANCH};protocol=https"
 
 S = "${WORKDIR}/git"