Add SOC update script
Need feed SOC update file name and TFTP IP
Tested: Built and validated a centriq2400 image
Change-Id: I74bf979c5c1e97aa25ea6f11b83831363041aa4d
Signed-off-by: Ken Chen <chen.kenyy@inventec.com>
diff --git a/meta-centriq2400-rep/recipes-phosphor/socupdate/files/socupdate.sh b/meta-centriq2400-rep/recipes-phosphor/socupdate/files/socupdate.sh
new file mode 100644
index 0000000..67d7063
--- /dev/null
+++ b/meta-centriq2400-rep/recipes-phosphor/socupdate/files/socupdate.sh
@@ -0,0 +1,129 @@
+#!/bin/sh -e
+# SOC update tool, need two parameter(soc update file name and TFTP ip)
+
+if [ ! -n "$1" -o ! -n "$2" ] ;then
+ echo "Please enter SOC-ImageName and TFTP-IP."
+ echo "Format: socupdate.sh FileName IP"
+ echo "Example: socupdate.sh 0ACJAXXX.ROM 192.168.1.1"
+ exit
+fi
+
+echo "SOC update start."
+
+echo "Check BMC status."
+checkbmc='gpioutil -p Q4'
+if $checkbmc = "1"; then
+ echo "BMC is ready."
+else
+ echo "BMC isn't ready."
+ exit
+fi
+
+echo "Check SOC image does it exist."
+cd /tmp/
+FILEEXIST=0
+if [ -f "/tmp/$1" ]; then
+ GETFILE=`du -k $1 | awk '{print $1}'`
+ if [ "$GETFILE" -eq "65536" ]; then
+ FILEEXIST=1
+ echo "SOC image is exist."
+ else
+ FILEEXIST=0
+ fi
+fi
+
+if [ $FILEEXIST -eq 0 ]; then
+ echo "Get SOC image from TFTP server."
+ echo "Please wait a few minutes."
+ tftp -g -r $1 $2 &
+ sleep 2
+ LENGTH=0
+ ERRCOUNT=0
+ while true
+ do
+ echo -ne "\r["
+ usleep 500000
+ while [ $LENGTH -le 30 ]
+ do
+ usleep 500000
+ echo -n ">"
+ LENGTH=$(($LENGTH+1))
+ if [ -f "/tmp/$1" ]; then
+ GETFILE=`du -k $1 | awk '{print $1}'`
+ if [ $GETFILE -eq 65536 ]; then
+ echo -en "\r"
+ echo -en "--- Image download completed --- \n"
+ usleep 1000000
+ break 2
+ fi
+ else
+ ERRCOUNT=$(($ERRCOUNT+1))
+ if [ $ERRCOUNT -le 10 ]; then
+ echo -en "\r"
+ echo -en "SOC-ImageName or TFTP-IP is ERROR. \n"
+ usleep 500000
+ exit
+ fi
+ fi
+ done
+ echo -n "]"
+ LENGTH=0
+ usleep 500000
+ echo -en "\r "
+ done
+fi
+sleep 3
+
+echo "Switch the host SPI bus to BMC."
+cmd='gpioutil -p C7 -v 1'
+if $cmd 1>/dev/null 2>&1; then
+ echo "Switch completed."
+else
+ echo "Switch failed."
+fi
+echo "Load the ASpeed SMC driver"
+echo 1e630000.flash-controller > /sys/bus/platform/drivers/aspeed-smc/bind
+sleep 2
+chassisstate=$(obmcutil chassisstate | awk -F. '{print $NF}')
+echo "---Current Chassisstate $chassisstate---"
+if [ "$chassisstate" == 'On' ];
+then
+ echo "---Chassis on turning it off---"
+ obmcutil chassisoff
+ sleep 10
+fi
+
+echo "Flashcp to update SOC."
+echo "Please wait a few minutes."
+flashcp -v /tmp/$1 /dev/mtd6
+sleep 3
+
+echo "Switch the host SPI bus to HOST."
+cmd1='gpioutil -p C7 -v 0'
+if $cmd1 1>/dev/null 2>&1; then
+ echo "Switch completed."
+else
+ echo "Switch failed."
+fi
+echo "unLoad the ASpeed SMC driver"
+echo 1e630000.flash-controller > /sys/bus/platform/drivers/aspeed-smc/unbind
+echo -ne "SOC update steps is complete.\n"
+if [ "$chassisstate" == 'On' ];
+then
+ echo "5 sec later will be power-on."
+ echo "If wantn't power-on, please CTRL + C leave script."
+ WAITSEC=5
+ while [ $WAITSEC -ge 0 ]
+ do
+ echo -n "Countdown seconds:$WAITSEC"
+ sleep 1
+ echo -en "\r"
+ WAITSEC=$(($WAITSEC-1))
+ if [ $WAITSEC -eq 0 ]; then
+ echo -en "\r"
+ echo -en "--- Power-on --- \n"
+ obmcutil chassison
+ break 1
+ fi
+ done
+fi
diff --git a/meta-centriq2400-rep/recipes-phosphor/socupdate/socupdate.bb b/meta-centriq2400-rep/recipes-phosphor/socupdate/socupdate.bb
new file mode 100644
index 0000000..45f69d3
--- /dev/null
+++ b/meta-centriq2400-rep/recipes-phosphor/socupdate/socupdate.bb
@@ -0,0 +1,13 @@
+SUMMARY = "Qualcomm SOC update"
+DESCRIPTION = ""
+HOMEPAGE = ""
+PR = "r1"
+
+inherit obmc-phosphor-license
+
+SRC_URI += "file://socupdate.sh"
+
+do_install() {
+ install -d ${D}${bindir}
+ install -m 0755 ${WORKDIR}/socupdate.sh ${D}${bindir}/socupdate.sh
+}