meta-quanta: Add meta-runbmc-nuvoton machine
Initial introduction of Quanta RunBMC family.
The meta-runbmc-nuvoton equipped with Nuvoton NPCM750 BMC SoC.
Tested: Build Quanta RunBMC board and load on the target hardware.
Ensure that BMC boots to console.
Change-Id: I1a211ceef91362e6276e09b396a4810f97e76377
Signed-off-by: Samuel Jiang <Samuel.Jiang@quantatw.com>
Signed-off-by: PKLee-Quanta <p.k.lee@quantatw.com>
diff --git a/meta-runbmc-nuvoton/recipes-bsp/u-boot/u-boot-fw-utils-nuvoton/fw_env.config b/meta-runbmc-nuvoton/recipes-bsp/u-boot/u-boot-fw-utils-nuvoton/fw_env.config
new file mode 100644
index 0000000..0c38427
--- /dev/null
+++ b/meta-runbmc-nuvoton/recipes-bsp/u-boot/u-boot-fw-utils-nuvoton/fw_env.config
@@ -0,0 +1,24 @@
+# Configuration file for fw_(printenv/setenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+# Notice, that the "Number of sectors" is not required on NOR and SPI-dataflash.
+# Futhermore, if the Flash sector size is ommitted, this value is assumed to
+# be the same as the Environment size, which is valid for NOR and SPI-dataflash
+
+# NOR example
+# MTD device name Device offset Env. size Flash sector size Number of sectors
+/dev/mtd2 0x0000 0x40000 0x4000
+
+# MTD SPI-dataflash example
+# MTD device name Device offset Env. size Flash sector size Number of sectors
+#/dev/mtd5 0x4200 0x4200
+#/dev/mtd6 0x4200 0x4200
+
+# NAND example
+#/dev/mtd0 0x4000 0x4000 0x20000 2
+
+# Block device example
+#/dev/mmcblk0 0xc0000 0x20000
+
+# VFAT example
+#/boot/uboot.env 0x0000 0x4000