meta-quanta: Add meta-f0b machine
Initial introduction of Quanta F0B family equipped with Aspeed 2500 BMC SoC.
Tested: Build Quanta F0B board and load on the target hardware.
Ensure that BMC boots to console.
Change-Id: I572708c3e900e00ce82844471100c8434946eaf6
Signed-off-by: PKLee-Quanta <p.k.lee@quantatw.com>
diff --git a/meta-f0b/recipes-phosphor/sensors/phosphor-hwmon/obmc/hwmon/ahb/apb/i2c@1e78a000/i2c-bus@180/tps53622@67.conf b/meta-f0b/recipes-phosphor/sensors/phosphor-hwmon/obmc/hwmon/ahb/apb/i2c@1e78a000/i2c-bus@180/tps53622@67.conf
new file mode 100644
index 0000000..2b8aafa
--- /dev/null
+++ b/meta-f0b/recipes-phosphor/sensors/phosphor-hwmon/obmc/hwmon/ahb/apb/i2c@1e78a000/i2c-bus@180/tps53622@67.conf
@@ -0,0 +1,29 @@
+LABEL_temp1 = "p0_vccio_vr_temp"
+WARNHI_temp1 = "10500"
+WARNLO_temp1 = "0"
+CRITHI_temp1 = "11500"
+CRITLO_temp1 = "0"
+
+LABEL_curr1 = "p0_vccio_vr_current"
+WARNLO_curr1 = "0"
+CRITLO_curr1 = "0"
+WARNHI_curr1 = "231000"
+CRITHI_curr1 = "288000"
+
+LABEL_in1 = "p0_vccio_vr_voltage"
+WARNLO_in1 = "0"
+CRITLO_in1 = "9500"
+WARNHI_in1 = "0"
+CRITHI_in1 = "17000"
+
+LABEL_power1 = "p0_vccio_vr_pin"
+WARNLO_power1 = "0"
+CRITLO_power1 = "0"
+WARNHI_power1 = "0"
+CRITHI_power1 = "0"
+
+LABEL_power2 = "p0_vccio_vr_pout"
+WARNLO_power2 = "0"
+CRITLO_power2 = "0"
+WARNHI_power2 = "0"
+CRITHI_power2 = "0"