diff --git a/meta-gbs/recipes-kernel/linux/linux-nuvoton/gbs.cfg b/meta-gbs/recipes-kernel/linux/linux-nuvoton/gbs.cfg
new file mode 100644
index 0000000..edd009c
--- /dev/null
+++ b/meta-gbs/recipes-kernel/linux/linux-nuvoton/gbs.cfg
@@ -0,0 +1,110 @@
+# Support full 1G memory for userspace on BMC
+CONFIG_VMSPLIT_3G_OPT=y
+CONFIG_NET_NCSI=y
+# Enable available sensors
+CONFIG_HWMON=y
+CONFIG_PMBUS=y
+CONFIG_SENSORS_PMBUS=y
+CONFIG_SENSORS_MAX34440=y
+CONFIG_SENSORS_LM75=y
+CONFIG_SENSORS_SBTSI=y
+CONFIG_SENSORS_ISL68137=y
+CONFIG_SENSORS_ADM1275=y
+CONFIG_NPCM7XX_ADC=y
+CONFIG_SENSORS_IIO_HWMON=y
+CONFIG_SENSORS_FAN=y
+CONFIG_SENSORS_JC42=y
+CONFIG_SENSORS_MAX31790=y
+CONFIG_SENSORS_UCD9000=y
+
+# Enable for firmware update LPC.
+CONFIG_DEVMEM=y
+
+# Enable seven seg display
+CONFIG_SEVEN_SEGMENT_DISPLAY=y
+CONFIG_SEVEN_SEGMENT_GPIO=y
+
+# Enable GPIO LEDS
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y // Allow userspace to blink LEDs
+CONFIG_LEDS_TRIGGER_PANIC=y // Blink BMC fault when kernel panics
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+
+# Enable pstore(ramoops) to capture kernel panics
+CONFIG_PSTORE=y
+CONFIG_PSTORE_RAM=y
+CONFIG_PSTORE_DEFLATE_COMPRESS=y
+
+# Enable Nuvoton ECC
+CONFIG_EDAC_ATOMIC_SCRUB=y
+CONFIG_EDAC_DEBUG=y
+CONFIG_EDAC_LEGACY_SYSFS=y
+CONFIG_EDAC_NPCM7XX=y
+CONFIG_EDAC_SUPPORT=y
+CONFIG_EDAC=y
+CONFIG_RAS=y
+
+# Enable Nuvoton JTAG
+CONFIG_NPCM7XX_JTAG_MASTER=y
+
+# USB
+CONFIG_USB_CONFIGFS_ECM_SUBSET=y
+CONFIG_USB_CONFIGFS_ECM=y
+CONFIG_USB_CONFIGFS_EEM=y
+CONFIG_USB_CONFIGFS_F_HID=y
+CONFIG_USB_CONFIGFS_MASS_STORAGE=y
+CONFIG_USB_CONFIGFS_RNDIS=y
+CONFIG_USB_CONFIGFS=y
+CONFIG_USB_F_ECM=y
+CONFIG_USB_F_EEM=y
+CONFIG_USB_F_MASS_STORAGE=y
+CONFIG_USB_F_RNDIS=y
+CONFIG_USB_F_SUBSET=y
+CONFIG_USB_GADGET_NPCM_USB2=y
+CONFIG_USB_NPCM_UDC=y
+CONFIG_USB_OHCI_HCD_NPCM7XX=y
+CONFIG_USB_SERIAL_CP210X=y
+CONFIG_USB_U_ETHER=y
+
+#SPI
+CONFIG_SPI=y
+CONFIG_SPI_NPCM_FIU=y
+CONFIG_SPI_NPCM_PSPI=y
+
+#I2C support
+CONFIG_I2C_MUX_LTC4306=y
+CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_SLAVE_EEPROM=y
+CONFIG_I2C_SLAVE_MQUEUE=y
+CONFIG_I2C_SLAVE=y
+
+#I2C GPIO expanders
+CONFIG_GPIO_PCA953X_IRQ=y
+CONFIG_GPIO_PCA953X=y
+CONFIG_GPIO_PCF857X=y
+
+# Misc
+CONFIG_OVERLAY_FS=y
+CONFIG_JFFS2_FS=y
+CONFIG_SQUASHFS_XZ=y
+CONFIG_SQUASHFS=y
+CONFIG_RESET_CONTROLLER=y
+CONFIG_RESET_NPCM=y
+CONFIG_IPVLAN=y
+CONFIG_VLAN_8021Q=y
+CONFIG_DEVKMEM=y
+CONFIG_EEPROM_AT24=y
+CONFIG_FORCE_MAX_ZONEORDER=12
+CONFIG_IIO_MUX=y
+CONFIG_IIO=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_MFD_SYSCON=y
+CONFIG_MTD_M25P80=y
+CONFIG_MUX_MMIO=y
+CONFIG_NPCM7XX_LPC_BPC=y
+CONFIG_MTD_PARTITIONED_MASTER=y