diff --git a/meta-barreleye/recipes-kernel/linux/linux-obmc/barreleye.cfg b/meta-barreleye/recipes-kernel/linux/linux-obmc/barreleye.cfg
new file mode 100644
index 0000000..086f191
--- /dev/null
+++ b/meta-barreleye/recipes-kernel/linux/linux-obmc/barreleye.cfg
@@ -0,0 +1,3 @@
+CONFIG_PMBUS=y
+CONFIG_SENSORS_PMBUS=y
+CONFIG_SENSORS_ADM1275=y
diff --git a/meta-barreleye/recipes-kernel/linux/linux-obmc/hwmon_adm1278.patch b/meta-barreleye/recipes-kernel/linux/linux-obmc/hwmon_adm1278.patch
new file mode 100644
index 0000000..074d39f
--- /dev/null
+++ b/meta-barreleye/recipes-kernel/linux/linux-obmc/hwmon_adm1278.patch
@@ -0,0 +1,165 @@
+diff --git a/drivers/hwmon/pmbus/adm1275.c b/drivers/hwmon/pmbus/adm1275.c
+index 188af4c..a45075d 100644
+--- a/drivers/hwmon/pmbus/adm1275.c
++++ b/drivers/hwmon/pmbus/adm1275.c
+@@ -24,7 +24,7 @@
+ #include <linux/bitops.h>
+ #include "pmbus.h"
+ 
+-enum chips { adm1075, adm1275, adm1276, adm1293, adm1294 };
++enum chips { adm1075, adm1275, adm1276, adm1278, adm1293, adm1294 };
+ 
+ #define ADM1275_MFR_STATUS_IOUT_WARN2	BIT(0)
+ #define ADM1293_MFR_STATUS_VAUX_UV_WARN	BIT(5)
+@@ -70,6 +70,22 @@ enum chips { adm1075, adm1275, adm1276, adm1293, adm1294 };
+ #define ADM1075_VAUX_OV_WARN		BIT(7)
+ #define ADM1075_VAUX_UV_WARN		BIT(6)
+ 
++#define ADM1278_PMON_CONTROL		0xd3
++#define ADM1278_PMON_CONFIG		0xd4
++#define ADM1278_CFG_TSFLT		BIT(15)
++#define ADM1278_CFG_SIMULTANEOUS	BIT(14)
++#define ADM1278_CFG_PMON_MODE		BIT(4)
++#define ADM1278_CFG_TEMP1_EN		BIT(3)
++#define ADM1278_CFG_VIN_EN		BIT(2)
++#define ADM1278_CFG_VOUT_EN		BIT(1)
++#define ADM1278_PEAK_TEMPERATURE	0xd7
++
++#define ADM1278_R_SENSE	1000	/* R_sense resistor value in microohmsi */
++
++static int r_sense = ADM1278_R_SENSE;
++module_param(r_sense, int, 0644);
++MODULE_PARM_DESC(r_sense, "Rsense resistor value in microohms");
++
+ struct adm1275_data {
+ 	int id;
+ 	bool have_oc_fault;
+@@ -186,6 +202,11 @@ static int adm1275_read_word_data(struct i2c_client *client, int page, int reg)
+ 	case PMBUS_VIRT_READ_VIN_MAX:
+ 		ret = pmbus_read_word_data(client, 0, ADM1275_PEAK_VIN);
+ 		break;
++	case PMBUS_VIRT_READ_TEMP_MAX:
++		if (data->id != adm1278)
++			return -ENODATA;
++		ret = pmbus_read_word_data(client, 0, ADM1278_PEAK_TEMPERATURE);
++		break;
+ 	case PMBUS_VIRT_READ_PIN_MIN:
+ 		if (!data->have_pin_min)
+ 			return -ENXIO;
+@@ -199,6 +220,7 @@ static int adm1275_read_word_data(struct i2c_client *client, int page, int reg)
+ 	case PMBUS_VIRT_RESET_IOUT_HISTORY:
+ 	case PMBUS_VIRT_RESET_VOUT_HISTORY:
+ 	case PMBUS_VIRT_RESET_VIN_HISTORY:
++	case PMBUS_VIRT_RESET_TEMP_HISTORY:
+ 		break;
+ 	case PMBUS_VIRT_RESET_PIN_HISTORY:
+ 		if (!data->have_pin_max)
+@@ -239,6 +261,9 @@ static int adm1275_write_word_data(struct i2c_client *client, int page, int reg,
+ 	case PMBUS_VIRT_RESET_VIN_HISTORY:
+ 		ret = pmbus_write_word_data(client, 0, ADM1275_PEAK_VIN, 0);
+ 		break;
++	case PMBUS_VIRT_RESET_TEMP_HISTORY:
++		ret = pmbus_write_word_data(client, 0, ADM1278_PEAK_TEMPERATURE, 0);
++		break;
+ 	case PMBUS_VIRT_RESET_PIN_HISTORY:
+ 		ret = pmbus_write_word_data(client, 0, ADM1276_PEAK_PIN, 0);
+ 		if (!ret && data->have_pin_min)
+@@ -312,6 +337,7 @@ static const struct i2c_device_id adm1275_id[] = {
+ 	{ "adm1075", adm1075 },
+ 	{ "adm1275", adm1275 },
+ 	{ "adm1276", adm1276 },
++	{ "adm1278", adm1278 },
+ 	{ "adm1293", adm1293 },
+ 	{ "adm1294", adm1294 },
+ 	{ }
+@@ -335,6 +361,8 @@ static int adm1275_probe(struct i2c_client *client,
+ 				     | I2C_FUNC_SMBUS_BLOCK_DATA))
+ 		return -ENODEV;
+ 
++	/* i2c_aspeed driver does not handle i2c_smbus_read_block_data correctly */
++#if 0
+ 	ret = i2c_smbus_read_block_data(client, PMBUS_MFR_ID, block_buffer);
+ 	if (ret < 0) {
+ 		dev_err(&client->dev, "Failed to read Manufacturer ID\n");
+@@ -363,6 +391,7 @@ static int adm1275_probe(struct i2c_client *client,
+ 		dev_notice(&client->dev,
+ 			   "Device mismatch: Configured %s, detected %s\n",
+ 			   id->name, mid->name);
++#endif
+ 
+ 	config = i2c_smbus_read_byte_data(client, ADM1275_PMON_CONFIG);
+ 	if (config < 0)
+@@ -377,7 +406,9 @@ static int adm1275_probe(struct i2c_client *client,
+ 	if (!data)
+ 		return -ENOMEM;
+ 
+-	data->id = mid->driver_data;
++	/* i2c_aspeed driver does not handle i2c_smbus_read_block_data correctly */
++	//data->id = mid->driver_data;
++	data->id = adm1278;
+ 
+ 	info = &data->info;
+ 
+@@ -460,6 +491,62 @@ static int adm1275_probe(struct i2c_client *client,
+ 			info->func[0] |=
+ 			  PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
+ 		break;
++	case adm1278:
++		/* Configure monitoring */
++		ret = i2c_smbus_write_byte_data(client,
++			ADM1278_PMON_CONTROL, 0);
++		if (ret < 0)
++			return ret;
++		ret = i2c_smbus_read_word_data(client, ADM1275_PMON_CONFIG);
++		ret = i2c_smbus_write_word_data(client, ADM1275_PMON_CONFIG,
++						ADM1278_CFG_PMON_MODE |
++						ADM1278_CFG_TEMP1_EN |
++						ADM1278_CFG_VIN_EN |
++						ADM1278_CFG_VOUT_EN);
++		if (ret < 0)
++			return ret;
++		ret = i2c_smbus_read_word_data(client, ADM1275_PMON_CONFIG);
++		dev_info(&client->dev, "adm1278 config: 0x%x\n", ret);
++		ret = i2c_smbus_write_byte_data(client, ADM1278_PMON_CONTROL,1);
++		if (ret < 0)
++			return ret;
++
++		info->func[0] |= PMBUS_HAVE_VIN
++			| PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
++			| PMBUS_HAVE_PIN
++			| PMBUS_HAVE_STATUS_INPUT
++			| PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
++
++		data->have_oc_fault = false;
++		data->have_uc_fault = false;
++		data->have_vout = true;
++		data->have_vaux_status = false;
++		data->have_mfr_vaux_status = false;
++		data->have_iout_min = false;
++		data->have_pin_min = false;
++		data->have_pin_max = true;
++
++		info->m[PSC_VOLTAGE_IN] = 19599;
++		info->b[PSC_VOLTAGE_IN] = 0;
++		info->R[PSC_VOLTAGE_IN] = -2;
++
++		info->m[PSC_VOLTAGE_OUT] = 19599;
++		info->b[PSC_VOLTAGE_OUT] = 0;
++		info->R[PSC_VOLTAGE_OUT] = -2;
++
++		info->m[PSC_CURRENT_OUT] = 800 * r_sense / 1000;
++		info->b[PSC_CURRENT_OUT] = 20475;
++		info->R[PSC_CURRENT_OUT] = -1;
++
++		info->m[PSC_POWER] = 6123 * r_sense / 1000;
++		info->b[PSC_POWER] = 0;
++		info->R[PSC_POWER] = -2;
++
++		info->format[PSC_TEMPERATURE] = direct;
++		info->m[PSC_TEMPERATURE] = 42;
++		info->b[PSC_TEMPERATURE] = 31880;
++		info->R[PSC_TEMPERATURE] = -1;
++		break;
+ 	case adm1293:
+ 	case adm1294:
+ 		data->have_iout_min = true;
diff --git a/meta-barreleye/recipes-kernel/linux/linux-obmc/readme_adm1278.txt b/meta-barreleye/recipes-kernel/linux/linux-obmc/readme_adm1278.txt
new file mode 100644
index 0000000..e86d977
--- /dev/null
+++ b/meta-barreleye/recipes-kernel/linux/linux-obmc/readme_adm1278.txt
@@ -0,0 +1,78 @@
+README for adm1278 hwmon driver
+==================================
+Yi Li <shliyi@cn.ibm.com>
+
+
+This is a temporary kernel patch to enable hwmon driver for adm1278 chip on Barreleye.
+When this patch is merged into linux kernel, this patch will be removed from openbmc.
+
+The adm1278 driver is created according to datasheet:
+http://www.analog.com/media/en/technical-documentation/data-sheets/ADM1278.pdf
+
+The patch heavily re-used adm1278 enabling code from: https://github.com/facebook/openbmc/blob/master/meta-aspeed/recipes-kernel/linux/files/patch-2.6.28.9/0000-linux-openbmc.patch.
+
+This patch has been tested on barreleye, by following these steps:
+
+1) There are 3 adm1278 devices on Barreleye
+
+I2C5: P12v_a for CPU0
+I2C6: P12v_b for CPU1
+I2C7: P12v_c for HDD and IO Board
+
+2) adm1278 driver is based on adm1275.c, which depends on pmbus. This patch builds
+adm1275 and pmbus into kernel.
+
+3) When kernel booted, initialize the adm1278 devices:
+
+root@barreleye:~# echo adm1278 0x10 > /sys/class/i2c-adapter/i2c-4/new_device
+root@barreleye:~# echo adm1278 0x10 > /sys/class/i2c-adapter/i2c-5/new_device
+root@barreleye:~# echo adm1278 0x10 > /sys/class/i2c-adapter/i2c-6/new_device
+
+There will be three new hwmon sysfs entries created:
+
+root@barreleye:~# ls /sys/class/hwmon/hwmon3/
+curr1_highest         in1_highest           in1_reset_history     in2_min_alarm         power1_label          temp1_input
+curr1_input           in1_input             in2_highest           in2_reset_history     power1_max            temp1_max
+curr1_label           in1_label             in2_input             name                  power1_reset_history  temp1_max_alarm
+curr1_max             in1_max               in2_label             power/                subsystem/            temp1_reset_history
+curr1_max_alarm       in1_max_alarm         in2_max               power1_alarm          temp1_crit            uevent
+curr1_reset_history   in1_min               in2_max_alarm         power1_input          temp1_crit_alarm
+device/               in1_min_alarm         in2_min               power1_input_highest  temp1_highest
+root@barreleye:~# ls /sys/class/hwmon/hwmon4/
+curr1_highest         in1_highest           in1_reset_history     in2_min_alarm         power1_label          temp1_input
+curr1_input           in1_input             in2_highest           in2_reset_history     power1_max            temp1_max
+curr1_label           in1_label             in2_input             name                  power1_reset_history  temp1_max_alarm
+curr1_max             in1_max               in2_label             power/                subsystem/            temp1_reset_history
+curr1_max_alarm       in1_max_alarm         in2_max               power1_alarm          temp1_crit            uevent
+curr1_reset_history   in1_min               in2_max_alarm         power1_input          temp1_crit_alarm
+device/               in1_min_alarm         in2_min               power1_input_highest  temp1_highest
+root@barreleye:~# ls /sys/class/hwmon/hwmon5/
+curr1_highest         in1_highest           in1_reset_history     in2_min_alarm         power1_label          temp1_input
+curr1_input           in1_input             in2_highest           in2_reset_history     power1_max            temp1_max
+curr1_label           in1_label             in2_input             name                  power1_reset_history  temp1_max_alarm
+curr1_max             in1_max               in2_label             power/                subsystem/            temp1_reset_history
+curr1_max_alarm       in1_max_alarm         in2_max               power1_alarm          temp1_crit            uevent
+curr1_reset_history   in1_min               in2_max_alarm         power1_input          temp1_crit_alarm
+device/               in1_min_alarm         in2_min               power1_input_highest  temp1_highest
+
+4) For details of what each hwmon sysfs attributes mean, please refer to:
+https://www.kernel.org/doc/Documentation/hwmon/pmbus
+For short, 'curr1_*' refers to 'IOUT', 'in1_*' refers to 'vin', 'in2_*' refers to 'vout', 'power1_*' refers to 'input power',
+'temp1_*' for 'temperature'.
+
+5) Remaining issue:
+
+5.1) Currently, i2c_aspeed driver does not handle "i2c_smbus_read_block_data()" correctly. So this patch has to bypass some detection code.
+We need to fix this issue when the patch is merged to kernel.
+5.2) According to adm1278 datasheet, there is a sense resistor used to measure power and current. The resistor will affect conversion between
+adm1278 register value to real-world value for current and power. I am not very sure about the resistor value. So using 1 mili-ohms (or 1000 micro-ohms) as default value. When build the adm1275 driver as kernel module, we can set this resistor value by:
+
+# insmod adm1275.ko r_sense=500
+
+This will set the 'sense resistor' to 500 micro-ohms.
+5.3) Some of the sensor value, e.g, 'temp1_input' seems not reasonable, e.g:
+
+root@barreleye:~# cat /sys/class/hwmon/hwmon4/temp1_input
+-270952
+
+Need further check on that.
diff --git a/meta-barreleye/recipes-kernel/linux/linux-obmc_%.bbappend b/meta-barreleye/recipes-kernel/linux/linux-obmc_%.bbappend
new file mode 100644
index 0000000..b6e8e16
--- /dev/null
+++ b/meta-barreleye/recipes-kernel/linux/linux-obmc_%.bbappend
@@ -0,0 +1,3 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/linux-obmc:"
+SRC_URI += "file://barreleye.cfg"
+SRC_URI += "file://hwmon_adm1278.patch"