#!/bin/bash -xe
###############################################################################
# Launch QEMU using the raw commands
#
#  Can be run by specifying the BASE_DIR and QEMU_ARCH when the script is
#  called. Additionally, this script is automatically called by running the
#  run-robot-qemu-test.sh, it's used to launch the QEMU test container.
#
###############################################################################
#
#  Variables BASE_DIR and QEMU_ARCH are both required but can be optionally
#  input as parameters following the initial script call. Alternatively, they
#  can be input by exporting them or sourcing the script into an environment
#  that has them declared.
#
#  Parameters:
#   parm1:  <optional, QEMU architecture to use >
#            default is ${QEMU_ARCH} - ppc64le-linux or x86_64-linux
#   parm2:  <optional, full path to base directory of qemu binary and images >
#            default is ${HOME}
#
# Optional Env Variable:
#
#  QEMU_BIN           = Location of qemu-system-arm binary to use when starting
#                       QEMU relative to upstream workspace.  Default is
#                       ./tmp/sysroots/${QEMU_ARCH}/usr/bin/qemu-system-arm
#                       which is the default location when doing a bitbake
#                       of obmc-phosphor-image
#
#  MACHINE            = Machine to run test against. Options are "witherspoon",
#                       "palmetto", "romulus", or undefined (default).  Default
#                       will use the versatilepb model.
###############################################################################

set -uo pipefail

QEMU_ARCH=${1:-$QEMU_ARCH}
# If QEMU_ARCH is empty exit, it is required to continue
echo "QEMU_ARCH = $QEMU_ARCH"
if [[ -z $QEMU_ARCH ]]; then
    echo "Did not pass in required QEMU arch parameter"
    exit -1
fi

BASE_DIR=${2:-$HOME}
# If BASE_DIR doesn't exist exit, it is required to continue
echo "BASE_DIR = $BASE_DIR"
if [[ ! -d $BASE_DIR ]]; then
    echo "No input directory and HOME not set!"
    exit -1
fi

# Set the location of the qemu binary relative to BASE_DIR
QEMU_BIN=${QEMU_BIN:-./tmp/sysroots/${QEMU_ARCH}/usr/bin/qemu-system-arm}

DEFAULT_MACHINE=versatilepb
MACHINE=${MACHINE:-${DEFAULT_MACHINE}}

# Enter the base directory
cd ${BASE_DIR}

# Find the correct drive file, and save its name.  OpenBMC has 3 different
# image formats.  The UBI based one, the standard static.mtd one, and the
# default QEMU basic image (rootfs.ext4).

DEFAULT_IMAGE_LOC="./tmp/deploy/images/"
if [ -f ${DEFAULT_IMAGE_LOC}/${MACHINE}/obmc-phosphor-image-${MACHINE}.ubi.mtd ]; then
    DRIVE=obmc-phosphor-image-${MACHINE}.ubi.mtd
elif [ -f ${DEFAULT_IMAGE_LOC}/${MACHINE}/obmc-phosphor-image-${MACHINE}.static.mtd ]; then
    DRIVE=obmc-phosphor-image-${MACHINE}.static.mtd
else
    DRIVE=$(ls ${DEFAULT_IMAGE_LOC}/qemuarm | grep rootfs.ext4)
fi

# Copy the drive file off to /tmp so that QEMU does not write anything back
# to the drive file and make it unusable for future QEMU runs.

TMP_DRIVE_PATH=$(mktemp "/tmp/${DRIVE}-XXXXX")

# The drive file is stored in different locations depending on if we are
# using the default or real platforms.
if [ ${MACHINE} = ${DEFAULT_MACHINE} ]; then
    cp ${DEFAULT_IMAGE_LOC}/qemuarm/${DRIVE} ${TMP_DRIVE_PATH}
else
    cp ${DEFAULT_IMAGE_LOC}/${MACHINE}/${DRIVE} ${TMP_DRIVE_PATH}
fi

# Obtain IP from /etc/hosts if IP is not valid set to localhost
IP=$(awk 'END{print $1}' /etc/hosts)
if [[ "$IP" != *.*.*.* ]]; then
  IP=127.0.0.1
fi

# Forward all needed ports for the robot test framework to run
# Since this is run in docker, the standard ports can be used
NET_FORWARDING=hostfwd=:${IP}:22-:22,hostfwd=:${IP}:443-:443,hostfwd=tcp:${IP}:80-:80,hostfwd=tcp:${IP}:2200-:2200,hostfwd=udp:${IP}:623-:623,hostfwd=udp:${IP}:664-:664

# Most system only have one NIC so set this as default
NIC="-net nic,model=ftgmac100,netdev=netdev1 -netdev user,id=netdev1,$NET_FORWARDING"
if [ ${MACHINE} = "tacoma" ]; then
    # Tacoma requires us to specify up to four NICs, with the third one being
    # the active device.
    NIC="-net nic,model=ftgmac100,netdev=netdev1 -netdev user,id=netdev1 "
    NIC+="-net nic,model=ftgmac100,netdev=netdev2 -netdev user,id=netdev2 "
    NIC+="-net nic,model=ftgmac100,netdev=netdev3 -netdev user,id=netdev3,$NET_FORWARDING "
    NIC+="-net nic,model=ftgmac100,netdev=netdev4 -netdev user,id=netdev4"
fi

# The syntax to start old qemu / default version requires different syntax
# then new qemu with the real platforms
if [ ${MACHINE} = ${DEFAULT_MACHINE} ]; then
    # Launch default QEMU using the qemu-system-arm
    ${QEMU_BIN} \
        -device virtio-net,netdev=mynet \
        -netdev user,id=mynet,hostfwd=tcp:${IP}:22-:22,hostfwd=tcp:${IP}:443-:443,hostfwd=tcp:${IP}:80-:80,hostfwd=tcp:${IP}:2200-:2200,hostfwd=udp:${IP}:623-:623,hostfwd=udp:${IP}:664-:664 \
        -machine versatilepb \
        -m 256 \
        -drive file=${TMP_DRIVE_PATH},if=virtio,format=raw \
        -show-cursor \
        -usb \
        -usbdevice tablet \
        -device virtio-rng-pci \
        -serial mon:vc \
        -serial mon:stdio \
        -serial null \
        -kernel ${DEFAULT_IMAGE_LOC}/qemuarm/zImage \
        -append 'root=/dev/vda rw highres=off  console=ttyS0 mem=256M ip=dhcp console=ttyAMA0,115200 console=tty'\
        -dtb ${DEFAULT_IMAGE_LOC}/qemuarm/zImage-versatile-pb.dtb
else
    ${QEMU_BIN} \
        -machine ${MACHINE}-bmc \
        -nographic \
        -drive file=${TMP_DRIVE_PATH},format=raw,if=mtd \
        ${NIC}
fi