diff --git a/ipmi/test_ipmi_user.robot b/ipmi/test_ipmi_user.robot
index 5242a50..a9d1857 100644
--- a/ipmi/test_ipmi_user.robot
+++ b/ipmi/test_ipmi_user.robot
@@ -3,6 +3,7 @@
 
 Resource            ../lib/ipmi_client.robot
 Resource            ../lib/openbmc_ffdc.robot
+Resource            ../lib/bmc_network_utils.robot
 Library             ../lib/ipmi_utils.py
 Test Setup          Printn
 
@@ -29,7 +30,6 @@
 # User defined count.
 ${USER_LOOP_COUNT}      20
 
-
 *** Test Cases ***
 
 Verify IPMI User Summary
@@ -364,6 +364,7 @@
 Verify Administrator And No Access Privilege For Different Channels
     [Documentation]  Set administrator and no access privilege for different channels and verify.
     [Tags]  Verify_Administrator_And_No_Access_Privilege_For_Different_Channels
+    [Setup]  Check Active Ethernet Channels
     [Teardown]  Run Keywords  FFDC On Test Case Fail  AND
     ...  Delete Created User  ${random_userid}
 
@@ -373,23 +374,24 @@
     ...  user set password ${random_userid} ${valid_password}
 
     # Set admin privilege for newly created user with channel 1.
-    Set Channel Access  ${random_userid}  ipmi=on privilege=${admin_level_priv}  1
+    Set Channel Access  ${random_userid}  ipmi=on privilege=${admin_level_priv}  ${CHANNEL_NUMBER}
 
     # Set no access privilege for newly created user with channel 2.
-    Set Channel Access  ${random_userid}  ipmi=on privilege=${no_access_priv}  2
+    Set Channel Access  ${random_userid}  ipmi=on privilege=${no_access_priv}  ${secondary_channel_number}
 
     Enable IPMI User And Verify  ${random_userid}
 
     # Verify that user is able to run administrator level IPMI command with channel 1.
-    Verify IPMI Command  ${random_username}  ${valid_password}  Administrator  1
+    Verify IPMI Command  ${random_username}  ${valid_password}  Administrator  ${CHANNEL_NUMBER}
 
     # Verify that user is unable to run IPMI command with channel 2.
-    Run IPMI Standard Command  sel info 2  expected_rc=${1}  U=${random_username}  P=${valid_password}
+    Run IPMI Standard Command  sel info ${secondary_channel_number}  expected_rc=${1}  U=${random_username}  P=${valid_password}
 
 
 Verify Operator And User Privilege For Different Channels
     [Documentation]  Set operator and user privilege for different channels and verify.
     [Tags]  Verify_Operator_And_User_Privilege_For_Different_Channels
+    [Setup]  Check Active Ethernet Channels
     [Teardown]  Run Keywords  FFDC On Test Case Fail  AND
     ...  Delete Created User  ${random_userid}
 
@@ -399,18 +401,18 @@
     ...  user set password ${random_userid} ${valid_password}
 
     # Set operator privilege for newly created user with channel 1.
-    Set Channel Access  ${random_userid}  ipmi=on privilege=${operator_priv}  1
+    Set Channel Access  ${random_userid}  ipmi=on privilege=${operator_priv}  ${CHANNEL_NUMBER}
 
     # Set user privilege for newly created user with channel 2.
-    Set Channel Access  ${random_userid}  ipmi=on privilege=${user_priv}  2
+    Set Channel Access  ${random_userid}  ipmi=on privilege=${user_priv}  ${secondary_channel_number}
 
     Enable IPMI User And Verify  ${random_userid}
 
     # Verify that user is able to run operator level IPMI command with channel 1.
-    Verify IPMI Command  ${random_username}  ${valid_password}  Operator  1
+    Verify IPMI Command  ${random_username}  ${valid_password}  Operator  ${CHANNEL_NUMBER}
 
     # Verify that user is able to run user level IPMI command with channel 2.
-    Verify IPMI Command  ${random_username}  ${valid_password}  User  2
+    Verify IPMI Command  ${random_username}  ${valid_password}  User  ${secondary_channel_number}
 
 
 Verify Setting IPMI User With Max Password Length
@@ -653,3 +655,18 @@
 
     Run IPMI Standard Command  user set name ${userid} ""
     Sleep  5s
+
+
+Check Active Ethernet Channels
+    [Documentation]  Check active ethernet channels and set suite variables.
+
+    ${channel_number_list}=  Get Active Ethernet Channel List
+    ${channel_length}=  Get Length  ${channel_number_list}
+    Skip If  '${channel_length}' == '1'
+    ...  msg= Skips this test case as only one channel was in active.
+
+    FOR  ${channel_num}  IN  @{channel_number_list}
+        ${secondary_channel_number}=  Set Variable If  ${channel_num} != ${CHANNEL_NUMBER}  ${channel_num}
+    END
+
+    Set Suite Variable  ${secondary_channel_number}
diff --git a/lib/bmc_network_utils.robot b/lib/bmc_network_utils.robot
index efe6998..dfa09d1 100644
--- a/lib/bmc_network_utils.robot
+++ b/lib/bmc_network_utils.robot
@@ -662,3 +662,56 @@
     ${sys_hostname}=  Get BMC Hostname
     Should Be Equal  ${sys_hostname}  ${hostname}
     ...  ignore_case=True  msg=Hostname does not exist.
+
+Get Channel Number For All Interface
+    [Documentation]  Gets the Interface name and returns the channel number for the given interface.
+
+    ${valid_channel_number_interface_names}=  Get Channel Config
+
+    ${valid_channel_number_interface_names}=  Convert To Dictionary  ${valid_channel_number_interface_names}
+
+    [Return]  ${valid_channel_number_interface_names}
+
+Get Valid Channel Number
+    [Documentation]  Get Valid Channel Number.
+    [Arguments]  ${valid_channel_number_interface_names}
+
+    #Description of argument(s):
+    #valid_channel_number_interface_names   Contains channel names in dict.
+
+    &{valid_channel_number_interface_name}=  Create Dictionary
+
+    FOR  ${key}  ${values}  IN  &{valid_channel_number_interface_names}
+      Run Keyword If  '${values['is_valid']}' == 'True'
+      ...  Set To Dictionary  ${valid_channel_number_interface_name}  ${key}  ${values}
+    END
+
+    [Return]  ${valid_channel_number_interface_name}
+
+Get Channel Number For Valid Ethernet Interface
+    [Documentation]  Get channel number for all ethernet interface.
+    [Arguments]  ${valid_channel_number_interface_name}
+
+    # Description of argument(s):
+    # channel_number_list  Contains channel names in list.
+
+    @{channel_number_list}=  Create List
+
+    FOR  ${channel_number}  ${values}  IN  &{valid_channel_number_interface_name}
+      Run Keyword If  '${values['channel_info']['medium_type']}' == 'lan-802.3'
+      ...  Append To List  ${channel_number_list}  ${channel_number}
+    END
+
+    [Return]  ${channel_number_list}
+
+Get Active Ethernet Channel List
+    [Documentation]  Get Available Channel.
+
+    ${valid_channel_number_interface_names}=  Get Channel Number For All Interface
+
+    ${valid_channel_number_interface_name}=  Get Valid Channel Number  ${valid_channel_number_interface_names}
+
+    ${channel_number_list}=  Get Channel Number For Valid Ethernet Interface
+    ...  ${valid_channel_number_interface_name}
+
+    [Return]  ${channel_number_list}