diff --git a/extended/code_update/code_update_utils.robot b/extended/code_update/code_update_utils.robot
index a762c03..3316b18 100644
--- a/extended/code_update/code_update_utils.robot
+++ b/extended/code_update/code_update_utils.robot
@@ -8,10 +8,10 @@
 
 *** Variables ***
 
-${BMC_UPD_METHOD}    /org/openbmc/control/flash/bmc/action/update
-${BMC_PREP_METHOD}   /org/openbmc/control/flash/bmc/action/PrepareForUpdate
-${BMC_UPD_ATTR}      /org/openbmc/control/flash/bmc
-${HOST_SETTING}      /org/openbmc/settings/host0
+${BMC_UPD_METHOD}    ${OPENBMC_BASE_URI}control/flash/bmc/action/update
+${BMC_PREP_METHOD}   ${OPENBMC_BASE_URI}control/flash/bmc/action/PrepareForUpdate
+${BMC_UPD_ATTR}      ${OPENBMC_BASE_URI}control/flash/bmc
+${HOST_SETTING}      ${OPENBMC_BASE_URI}settings/host0
 
 *** Keywords ***
 
diff --git a/extended/test_journal.robot b/extended/test_journal.robot
index cc5802c..d16cfc5 100644
--- a/extended/test_journal.robot
+++ b/extended/test_journal.robot
@@ -22,10 +22,10 @@
 
     Start Journal Log
 
-    openbmc get request     /org/openbmc/
+    openbmc get request     ${OPENBMC_BASE_URI}
 
     ${output}=    Stop Journal Log
-    Should Contain   ${output}    GET /org/openbmc/ HTTP/1.1
+    Should Contain   ${output}    GET ${OPENBMC_BASE_URI} HTTP/1.1
 
 Post Request Journal Log
     [Documentation]   This testcase is to verify that proper log is logged in
@@ -34,10 +34,10 @@
 
     Start Journal Log
 
-    openbmc post request     /org/openbmc/records/events/action/clear    data=${NIL}
+    openbmc post request     ${OPENBMC_BASE_URI}records/events/action/clear    data=${NIL}
 
     ${output}=    Stop Journal Log
-    Should Contain   ${output}    POST /org/openbmc/records/events/action/clear HTTP/1.1
+    Should Contain   ${output}    POST ${OPENBMC_BASE_URI}records/events/action/clear HTTP/1.1
 
 Put Request Journal Log
     [Documentation]   This testcase is to verify that proper log is logged in
@@ -48,10 +48,10 @@
 
     ${bootpolicy} =   Set Variable   ONETIME
     ${valueDict} =   create dictionary   data=${bootpolicy}
-    openbmc put request  /org/openbmc/settings/host0/attr/boot_policy   data=${valueDict}
+    openbmc put request  ${OPENBMC_BASE_URI}settings/host0/attr/boot_policy   data=${valueDict}
 
     ${output}=    Stop Journal Log
-    Should Contain   ${output}    PUT /org/openbmc/settings/host0/attr/boot_policy HTTP/1.1
+    Should Contain   ${output}    PUT ${OPENBMC_BASE_URI}settings/host0/attr/boot_policy HTTP/1.1
 
 *** Keywords ***
 
diff --git a/extended/test_networkd_ext.robot b/extended/test_networkd_ext.robot
index d966976..3f41da8 100755
--- a/extended/test_networkd_ext.robot
+++ b/extended/test_networkd_ext.robot
@@ -41,7 +41,9 @@
 
     ${arglist}=    Create List    eth0    ${NEW_IP}   ${NEW_MASK}   ${NEW_GATEWAY}
     ${args}=     Create Dictionary   data=@{arglist}
-    run keyword and ignore error    Call Method    /org/openbmc/NetworkManager/Interface/   SetAddress4    data=${args}
+    run keyword and ignore error
+    ...   Call Method
+    ...   ${OPENBMC_BASE_URI}NetworkManager/Interface/   SetAddress4    data=${args}
 
     Wait For Host To Ping       ${NEW_IP}
     Set Suite Variable      ${AUTH_URI}       https://${NEW_IP}
@@ -66,7 +68,9 @@
 
     ${arglist}=    Create List    eth0       ${OLD_IP}    ${OLD_MASK}   ${OLD_GATEWAY}
     ${args}=     Create Dictionary   data=@{arglist}
-    run keyword and ignore error    Call Method    /org/openbmc/NetworkManager/Interface/   SetAddress4    data=${args}
+    run keyword and ignore error
+    ...    Call Method
+    ...    ${OPENBMC_BASE_URI}NetworkManager/Interface/   SetAddress4    data=${args}
 
     Wait For Host To Ping       ${OLD_IP}
     Set Suite Variable      ${AUTH_URI}    https://${OLD_IP}
@@ -142,7 +146,8 @@
     [arguments]    ${intf}
     @{arglist}=    Create List   ${intf}
     ${args}=       Create Dictionary   data=@{arglist}
-    ${resp}=       Call Method    /org/openbmc/NetworkManager/Interface/   GetAddress4    data=${args}
+    ${resp}=       Call Method
+    ...    ${OPENBMC_BASE_URI}NetworkManager/Interface/   GetAddress4    data=${args}
     should be equal as strings      ${resp.status_code}     ${HTTP_OK}
     ${json} =   to json         ${resp.content}
     Log   ${json['data'][2]}
@@ -165,7 +170,8 @@
     [Arguments]    ${intf}      ${address}    ${result}
     ${arglist}=    Create List    ${intf}    ${address}
     ${args}=       Create Dictionary   data=@{arglist}
-    ${resp}=       Call Method    /org/openbmc/NetworkManager/Interface/   SetHwAddress    data=${args}
+    ${resp}=       Call Method
+    ...   ${OPENBMC_BASE_URI}NetworkManager/Interface/   SetHwAddress    data=${args}
     should not be equal as strings      ${resp.status_code}     ${HTTP_OK}
     ${json} =   to json         ${resp.content}
     should be equal as strings      ${json['status']}       ${result}
@@ -175,7 +181,8 @@
     [Arguments]    ${intf}      ${address}   ${result}
     ${arglist}=    Create List    ${intf}    ${address}
     ${args}=       Create Dictionary   data=@{arglist}
-    ${resp}=       Call Method    /org/openbmc/NetworkManager/Interface/   SetHwAddress    data=${args}
+    ${resp}=       Call Method
+    ...    ${OPENBMC_BASE_URI}NetworkManager/Interface/   SetHwAddress    data=${args}
     should be equal as strings      ${resp.status_code}     ${HTTP_OK}
     ${json} =   to json         ${resp.content}
     should be equal as strings      ${json['status']}       ${result}
@@ -185,6 +192,7 @@
 
     @{arglist}=   Create List   ${intf}
     ${args}=     Create Dictionary   data=@{arglist}
-    ${resp}=   Call Method    /org/openbmc/NetworkManager/Interface/    GetHwAddress    data=${args}
+    ${resp}=   Call Method
+    ...    ${OPENBMC_BASE_URI}NetworkManager/Interface/    GetHwAddress    data=${args}
     ${json} =   to json         ${resp.content}
     should be equal as strings   ${json['data']}    ${address}
diff --git a/extended/test_power_restore.robot b/extended/test_power_restore.robot
index e6d90c4..8fc150e 100644
--- a/extended/test_power_restore.robot
+++ b/extended/test_power_restore.robot
@@ -17,7 +17,7 @@
 Force Tags      chassisboot  bmcreboot
 
 *** Variables ***
-${HOST_SETTING}    /org/openbmc/settings/host0
+${HOST_SETTING}    ${OPENBMC_BASE_URI}settings/host0
 
 *** Test Cases ***
 
diff --git a/extended/test_syslog.robot b/extended/test_syslog.robot
index 8be14a9..c8dab97 100755
--- a/extended/test_syslog.robot
+++ b/extended/test_syslog.robot
@@ -25,13 +25,16 @@
     ...                 This testcase is to get all syslog settings from
     ...                 open bmc system.\n
 
-    ${ip_address} =    Read Attribute    /org/openbmc/LogManager/rsyslog   ipaddr
+    ${ip_address} =    Read Attribute
+    ...    ${OPENBMC_BASE_URI}LogManager/rsyslog   ipaddr
     Should Not Be Empty     ${ip_address}
 
-    ${port} =    Read Attribute    /org/openbmc/LogManager/rsyslog   port
+    ${port} =    Read Attribute
+    ...    ${OPENBMC_BASE_URI}LogManager/rsyslog   port
     Should Not Be Empty     ${port}
 
-    ${status} =    Read Attribute    /org/openbmc/LogManager/rsyslog   status
+    ${status} =    Read Attribute
+    ...    ${OPENBMC_BASE_URI}LogManager/rsyslog   status
     Should Not Be Empty     ${status}
 
 Enable syslog with port number and IP address
@@ -41,9 +44,11 @@
 
     ${resp} =    Enable Syslog Setting    ${SYSLOG_IP_ADDRESS}    ${SYSLOG_PORT}
     Should Be Equal    ${resp}    ok
-    ${ip}=   Read Attribute   /org/openbmc/LogManager/rsyslog   ipaddr
+    ${ip}=   Read Attribute
+    ...   ${OPENBMC_BASE_URI}LogManager/rsyslog   ipaddr
     Should Be Equal    ${ip}    ${SYSLOG_IP_ADDRESS}
-    ${port}=   Read Attribute   /org/openbmc/LogManager/rsyslog   port
+    ${port}=   Read Attribute
+    ...   ${OPENBMC_BASE_URI}LogManager/rsyslog   port
     Should Be Equal    ${port}    ${SYSLOG_PORT}
 
 Enable syslog without IP address and port number
@@ -53,7 +58,8 @@
 
     ${resp} =    Enable Syslog Setting    ${EMPTY}    ${EMPTY}
     Should Be Equal    ${resp}    ok
-    ${status}=   Read Attribute   /org/openbmc/LogManager/rsyslog   status
+    ${status}=   Read Attribute
+    ...   ${OPENBMC_BASE_URI}LogManager/rsyslog   status
     Should Be Equal    ${status}    Enabled
 
 Enable syslog with only IP address
@@ -62,22 +68,27 @@
 
     ${resp} =    Enable Syslog Setting    ${SYSLOG_IP_ADDRESS}    ${EMPTY}
     Should Be Equal    ${resp}    ok
-    ${ip}=   Read Attribute   /org/openbmc/LogManager/rsyslog   ipaddr
+    ${ip}=   Read Attribute
+    ...   ${OPENBMC_BASE_URI}LogManager/rsyslog   ipaddr
     Should Be Equal    ${ip}    ${SYSLOG_IP_ADDRESS}
-    ${status}=   Read Attribute   /org/openbmc/LogManager/rsyslog   status
+    ${status}=   Read Attribute
+    ...   ${OPENBMC_BASE_URI}LogManager/rsyslog   status
     Should Be Equal    ${status}    Enabled
 
 Enable Syslog with only port number
     [Documentation]     ***GOOD PATH***
     ...                 This testcase is to enable syslog with only port number.\n
 
-    ${status}=   Read Attribute   /org/openbmc/LogManager/rsyslog   status
+    ${status}=   Read Attribute
+    ...   ${OPENBMC_BASE_URI}LogManager/rsyslog   status
     Should Be Equal    ${status}    Enabled
     ${resp} =    Enable Syslog Setting    ${EMPTY}    ${SYSLOG_PORT}
     Should Be Equal    ${resp}    ok
-    ${port}=   Read Attribute   /org/openbmc/LogManager/rsyslog   port
+    ${port}=   Read Attribute
+    ...   ${OPENBMC_BASE_URI}LogManager/rsyslog   port
     Should Be Equal    ${port}    ${SYSLOG_PORT}
-    ${status}=   Read Attribute   /org/openbmc/LogManager/rsyslog   status
+    ${status}=   Read Attribute
+    ...   ${OPENBMC_BASE_URI}LogManager/rsyslog   status
     Should Be Equal    ${status}    Enabled
 
 Disable Syslog
@@ -86,7 +97,8 @@
 
     ${resp} =    Disable Syslog Setting    ${EMPTY}
     Should Be Equal    ${resp}    ok
-    ${status}=   Read Attribute   /org/openbmc/LogManager/rsyslog   status
+    ${status}=   Read Attribute
+    ...   ${OPENBMC_BASE_URI}LogManager/rsyslog   status
     Should Be Equal    Disable    ${status}
 
 Enable invalid ip for Syslog remote server
@@ -111,18 +123,24 @@
     ...               after service processor reboot.
     [Tags]  bmcreboot
 
-    ${old_ip}=   Read Attribute   /org/openbmc/LogManager/rsyslog   ipaddr
-    ${old_port}=   Read Attribute   /org/openbmc/LogManager/rsyslog   port
-    ${old_status} =    Read Attribute    /org/openbmc/LogManager/rsyslog   status
-    
+    ${old_ip}=   Read Attribute
+    ...   ${OPENBMC_BASE_URI}LogManager/rsyslog   ipaddr
+    ${old_port}=   Read Attribute
+    ...   ${OPENBMC_BASE_URI}LogManager/rsyslog   port
+    ${old_status} =    Read Attribute
+    ...    ${OPENBMC_BASE_URI}LogManager/rsyslog   status
+
     ${output}=      Execute Command    /sbin/reboot
     Sleep   ${SYSTEM_SHUTDOWN_TIME}
     Wait For Host To Ping   ${OPENBMC_HOST}
     Sleep   ${WAIT_FOR_SERVICES_UP}
 
-    ${ip_address} =    Read Attribute    /org/openbmc/LogManager/rsyslog   ipaddr
-    ${port} =    Read Attribute    /org/openbmc/LogManager/rsyslog   port
-    ${status} =    Read Attribute    /org/openbmc/LogManager/rsyslog   status
+    ${ip_address} =    Read Attribute
+    ...    ${OPENBMC_BASE_URI}LogManager/rsyslog   ipaddr
+    ${port} =    Read Attribute
+    ...    ${OPENBMC_BASE_URI}LogManager/rsyslog   port
+    ${status} =    Read Attribute
+    ...    ${OPENBMC_BASE_URI}LogManager/rsyslog   status
 
     Should Be Equal    ${old_ip}    ${ip_address}
     Should Be Equal    ${old_port}    ${port}
@@ -135,7 +153,8 @@
     ${MYDICT}=  create Dictionary   ipaddr=${ipaddr}  port=${port}
     @{rsyslog} =   Create List     ${MYDICT}
     ${data} =   create dictionary   data=@{rsyslog}
-    ${resp} =   openbmc post request    /org/openbmc/LogManager/rsyslog/action/Enable     data=${data}
+    ${resp} =   openbmc post request
+    ...    ${OPENBMC_BASE_URI}LogManager/rsyslog/action/Enable     data=${data}
     ${jsondata} =    to json    ${resp.content}
     [return]    ${jsondata['status']}
 
@@ -143,6 +162,7 @@
     [Arguments]    ${args}
     @{setting_list} =   Create List     ${args}
     ${data} =   create dictionary   data=@{setting_list}
-    ${resp} =   OpenBMC Post Request    /org/openbmc/LogManager/rsyslog/action/Disable      data=${data}
+    ${resp} =   OpenBMC Post Request
+    ...    ${OPENBMC_BASE_URI}LogManager/rsyslog/action/Disable      data=${data}
     ${jsondata} =    to json    ${resp.content}
     [return]    ${jsondata['status']}