diff --git a/network/test_cable_pull_recover.robot b/network/test_cable_pull_recover.robot
new file mode 100644
index 0000000..5a39eb2
--- /dev/null
+++ b/network/test_cable_pull_recover.robot
@@ -0,0 +1,78 @@
+*** Settings ***
+Documentation  Verify the port recovery by simulating its disconnection.
+
+# Test Parameters:
+
+# OS_HOST             The OS host name or IP Address.
+# OS_USERNAME         The OS login userid (usually root).
+# OS_PASSWORD         The OS login password.
+# DEVICE_HOST         The network device hostname or IP where the ports will
+#                     be shutdown.
+# DEVICE_USERNAME     The network device username.
+# DEVICE_PASSWORD     The network device password.
+# PORT_NUMBER         The switch port where the server is connected (e.g.
+#                     "1", "2", etc).
+# NET_INTERFACE       The network interface name that will be tested (e.g.
+#                     "enP5s1f0", "eth0").
+
+Library         ../lib/bmc_ssh_utils.py
+Resource        ../lib/resource.txt
+Resource        ../syslib/utils_os.robot
+
+Suite Setup     Test Setup Execution
+
+*** Variables ***
+
+${PORT_NUMBER}  ${EMPTY}
+
+*** Test Cases ***
+
+Verify Network Interface Recovery
+    [Documentation]  Test the recovery of the network interface that has been
+    ...  shutdown from the switch port.
+    [Tags]  Verify_Network_Interface_Recovery
+
+    Rprintn
+    Set Switch Port State  DOWN
+    Set Switch Port State  UP
+
+*** Keywords ***
+
+Set Switch Port State
+    [Documentation]  Disable the port connected to the server.
+    [Arguments]  ${port_number}=${PORT_NUMBER}  ${state}=${EMPTY}
+
+    # Description of argument(s):
+    # port_number     The switch port where the server is connected (e.g.
+    #                 "1", "2", etc).
+    # state           The state to be set in the network interface ("UP" or
+    #                 "DOWN").
+
+    Device Write  enable
+    Device Write  configure terminal
+    Device Write  interface port ${PORT_NUMBER}
+    Run Keyword If  '${state}' == 'DOWN'
+    ...    Device Write  shutdown
+    ...  ELSE
+    ...    Device Write  no shutdown
+    Wait Until Keyword Succeeds  30 sec  5 sec
+    ...  Check Network Interface State  ${state}
+
+Check Network Interface State
+    [Documentation]  Check the status of the network interface.
+    [Arguments]  ${NET_INTERFACE}=${NET_INTERFACE}  ${state}=${EMPTY}
+
+    # Description of argument(s):
+    # NET_INTERFACE   The network interface name that will be tested (e.g.
+    #                 "enP5s1f0", "eth0").
+    # state           The network interface expected state ("UP" or "DOWN").
+
+    ${stdout}  ${stderr}  ${rc}=  OS Execute Command
+    ...  ip link | grep "${NET_INTERFACE}" | cut -d " " -f9
+    Should Contain  ${stdout}  ${state}  msg=State not found as expected.
+
+Test Setup Execution
+    [Documentation]  Do suite setup tasks.
+
+    Should Not Be Empty  ${PORT_NUMBER}
+    Should Not Be Empty  ${NET_INTERFACE}