*** Settings ***
Documentation            Update firmware on a target BMC via Redifsh.

# Test Parameters:
# IMAGE_FILE_PATH        The path to the BMC image file.
#
# Firmware update states:
#     Enabled            Image is installed and either functional or active.
#     Disabled           Image installation failed or ready for activation.
#     Updating           Image installation currently in progress.

Resource                 ../../lib/resource.robot
Resource                 ../../lib/bmc_redfish_resource.robot
Resource                 ../../lib/openbmc_ffdc.robot
Resource                 ../../lib/common_utils.robot
Resource                 ../../lib/code_update_utils.robot
Resource                 ../../lib/dump_utils.robot
Resource                 ../../lib/logging_utils.robot
Resource                 ../../lib/redfish_code_update_utils.robot
Resource                 ../../lib/utils.robot
Resource                 ../../lib/bmc_redfish_utils.robot
Resource                 ../../lib/external_intf/management_console_utils.robot
Library                  ../../lib/gen_robot_valid.py
Library                  ../../lib/tftp_update_utils.py
Library                  ../../lib/gen_robot_keyword.py

Suite Setup              Suite Setup Execution
Suite Teardown           Redfish.Logout
Test Setup               Printn
Test Teardown            FFDC On Test Case Fail

Force Tags               BMC_Code_Update

*** Variables ***

@{ADMIN}          admin_user  TestPwd123
&{USERS}          Administrator=${ADMIN}
${LOOP_COUNT}     ${2}

*** Test Cases ***

Redfish Code Update With ApplyTime OnReset
    [Documentation]  Update the firmware image with ApplyTime of OnReset.
    [Tags]  Redfish_Code_Update_With_ApplyTime_OnReset
    [Template]  Redfish Update Firmware

    # policy
    OnReset


Redfish Code Update With ApplyTime Immediate
    [Documentation]  Update the firmware image with ApplyTime of Immediate.
    [Tags]  Redfish_Code_Update_With_ApplyTime_Immediate
    [Template]  Redfish Update Firmware

    # policy
    Immediate


Redfish Code Update Same Firmware Multiple Times
    [Documentation]  Multiple times update the firmware image for update service.
    [Tags]  Redfish_Code_Update_Same_Firmware_Multiple_Times

    ${temp_update_loop_count}=  Evaluate  ${LOOP_COUNT} + 1

    FOR  ${count}  IN RANGE  1  ${temp_update_loop_count}
       Print Timen  ***************************************
       Print Timen  * The Current Loop Count is ${count} of ${LOOP_COUNT} *
       Print Timen  ***************************************

       Redfish Update Firmware  apply_time=OnReset
    END


Redfish Code Update With Multiple Firmware
    [Documentation]  Update the firmware image with ApplyTime of Immediate.
    [Tags]  Redfish_Code_Update_With_Multiple_Firmware
    [Template]  Redfish Multiple Upload Image And Check Progress State

    # policy   image_file_path     alternate_image_file_path
    Immediate  ${IMAGE_FILE_PATH}  ${ALTERNATE_IMAGE_FILE_PATH}


Post BMC Reset Perform Redfish Code Update
    [Documentation]  Test to reset BMC at standby and then perform BMC firmware update and
    ...              ensure there is not error or dump logs post update.
    [Tags]  Post_BMC_Reset_Perform_Redfish_Code_Update

    Redfish Delete All BMC Dumps
    Redfish Purge Event Log

    Redfish OBMC Reboot (off)

    Redfish Update Firmware  apply_time=OnReset

    Event Log Should Not Exist
    Redfish BMC Dump Should Not Exist

    Redfish Power Off


Post BMC Reset Perform Image Switched To Backup Multiple Times
    [Documentation]  Test to reset BMC at standby and then perform switch
    ...              to backup image multiple times.
    ...              Then ensure no event and dump logs exist.
    [Tags]  Post_BMC_Reset_Perform_Image_Switched_To_Backup_Multiple_Times

    Redfish Delete All BMC Dumps
    Redfish Purge Event Log

    Redfish OBMC Reboot (off)

    ${temp_update_loop_count}=  Evaluate  ${LOOP_COUNT} + 1

    FOR  ${count}  IN RANGE  1  ${temp_update_loop_count}
      ${state}=  Get Pre Reboot State

      # change to backup image and reset the BMC.
      Switch Backup Firmware Image To Functional

      Wait For Reboot  start_boot_seconds=${state['epoch_seconds']}
    END

    Event Log Should Not Exist
    Redfish BMC Dump Should Not Exist


Verify Code Update Fails When Kernel Panic Occur
     [Documentation]  Ensure firmware update is un-successful when kernel panic
     ...              occur during ongoing firmware update.
     [Tags]  Verify_Code_Update_Fails_When_Kernel_Panic_Occur

     ${before_update_activeswimage}=  Redfish.Get Attribute  /redfish/v1/Managers/bmc  Links
     Rprint Vars  before_update_activeswimage

     Set ApplyTime  policy=OnReset

     ${task_inv_dict}=  Get Task State from File

     ${file_bin_data}=  OperatingSystem.Get Binary File  ${image_file_path}

     Log To Console   Start uploading image to BMC.
     Upload Image To BMC  ${REDFISH_BASE_URI}UpdateService  timeout=${600}  data=${file_bin_data}
     Log To Console   Completed image upload to BMC.

     Sleep  5

     ${task_inv}=  Check Task With Match TargetUri  /redfish/v1/UpdateService
     Rprint Vars  task_inv

     Run Keyword  Kernel Panic BMC Reset Operation

     Is BMC Unpingable

     Wait Until Keyword Succeeds  10 min  10 sec  Is BMC Standby

     Redfish.Login

     ${after_update_activeswimage}=  Redfish.Get Attribute  /redfish/v1/Managers/bmc  Links
     Rprint Vars  after_update_activeswimage

     Should Be Equal As Strings
     ...  ${before_update_activeswimage['ActiveSoftwareImage']['@odata.id']}
     ...  ${after_update_activeswimage['ActiveSoftwareImage']['@odata.id']}

     Verify Get ApplyTime  OnReset


Verify If The Modified Admin Credential Is Valid Post Image Switched To Backup
    [Documentation]  Verify updated admin credential remain same post switch to back up image.
    [Tags]  Verify_If_The_Modified_Admin_Credential_Is_Valid_Post_Image_Switched_To_Backup
    [Setup]  Create Users With Different Roles  users=${USERS}  force=${True}
    [Teardown]  Run Keywords  Redfish.Login  AND  Delete BMC Users Via Redfish  users=${USERS}

    ${post_code_update_actions}=  Get Post Boot Action
    ${state}=  Get Pre Reboot State
    Expire And Update New Password Via Redfish  ${ADMIN[0]}  ${ADMIN[1]}  0penBmc123

    Redfish.Login
    # change to backup image and reset the BMC.
    Switch Backup Firmware Image To Functional
    Wait For Reboot  start_boot_seconds=${state['epoch_seconds']}

    # verify modified admin password on backup image.
    Redfish.Login  admin_user  0penBmc123
    Redfish.Logout


Verify If The Modified Admin Credential Is Valid Post Update
    [Documentation]  Verify updated admin credential remain same post code update image.
    [Tags]  Verify_If_The_Modified_Admin_Credential_Is_Valid_Post_Update
    [Setup]  Create Users With Different Roles  users=${USERS}  force=${True}
    [Teardown]  Run Keywords  Redfish.Login  AND  Delete BMC Users Via Redfish  users=${USERS}

    Expire And Update New Password Via Redfish  ${ADMIN[0]}  ${ADMIN[1]}  0penBmc123

    Redfish.Login
    # Flash latest firmware using redfish.
    Redfish Update Firmware  OnReset

    # verify modified admin credentails on latest image.
    Redfish.Login  admin_user  0penBmc123
    Redfish.Logout

*** Keywords ***

Suite Setup Execution
    [Documentation]  Do the suite setup.

    Valid File Path  IMAGE_FILE_PATH
    Redfish.Login

    Redfish Delete All BMC Dumps
    Redfish Purge Event Log

    Redfish Power Off  stack_mode=skip


Redfish Update Firmware
    [Documentation]  Update the BMC firmware via redfish interface.
    [Arguments]  ${apply_time}

    # Description of argument(s):
    # policy     ApplyTime allowed values (e.g. "OnReset", "Immediate").

    ${post_code_update_actions}=  Get Post Boot Action
    ${state}=  Get Pre Reboot State
    Rprint Vars  state
    Set ApplyTime  policy=${apply_Time}

    ${task_inv_dict}=  Get Task State from File

    ${file_bin_data}=  OperatingSystem.Get Binary File  ${image_file_path}

    Log To Console   Start uploading image to BMC.
    Upload Image To BMC  ${REDFISH_BASE_URI}UpdateService  timeout=${600}  data=${file_bin_data}
    Log To Console   Completed image upload to BMC.

    ${task_inv}=  Check Task With Match TargetUri  /redfish/v1/UpdateService

    Rprint Vars  task_inv

    Wait Until Keyword Succeeds  5 min  10 sec
    ...  Verify Task Progress State  ${task_inv}  ${task_inv_dict['TaskCompleted']}

    Run Key  ${post_code_update_actions['BMC image']['${apply_time}']}
    Redfish.Login
    Redfish Verify BMC Version  ${IMAGE_FILE_PATH}
    Verify Get ApplyTime  ${apply_time}


Redfish Multiple Upload Image And Check Progress State
    [Documentation]  Update multiple BMC firmware via redfish interface and check status.
    [Arguments]  ${apply_time}  ${IMAGE_FILE_PATH}  ${ALTERNATE_IMAGE_FILE_PATH}

    # Description of argument(s):
    # apply_time                 ApplyTime allowed values (e.g. "OnReset", "Immediate").
    # IMAGE_FILE_PATH            The path to BMC image file.
    # ALTERNATE_IMAGE_FILE_PATH  The path to alternate BMC image file.

    ${post_code_update_actions}=  Get Post Boot Action
    Valid File Path  ALTERNATE_IMAGE_FILE_PATH
    ${state}=  Get Pre Reboot State
    Rprint Vars  state

    Set ApplyTime  policy=${apply_time}
    Redfish Upload Image  ${REDFISH_BASE_URI}UpdateService  ${IMAGE_FILE_PATH}

    ${first_image_id}=  Get Latest Image ID
    Rprint Vars  first_image_id
    Sleep  5s
    Redfish Upload Image  ${REDFISH_BASE_URI}UpdateService  ${ALTERNATE_IMAGE_FILE_PATH}

    ${second_image_id}=  Get Latest Image ID
    Rprint Vars  second_image_id

    Check Image Update Progress State
    ...  match_state='Updating', 'Disabled'  image_id=${second_image_id}

    Check Image Update Progress State
    ...  match_state='Updating'  image_id=${first_image_id}

    Wait Until Keyword Succeeds  8 min  20 sec
    ...  Check Image Update Progress State
    ...    match_state='Enabled'  image_id=${first_image_id}
    Run Key  ${post_code_update_actions['BMC image']['${apply_time}']}
    Redfish.Login
    Redfish Verify BMC Version  ${IMAGE_FILE_PATH}