diff --git a/ipmi/test_ipmi_network_verificaton.robot b/ipmi/test_ipmi_network_verificaton.robot
new file mode 100644
index 0000000..39bac45
--- /dev/null
+++ b/ipmi/test_ipmi_network_verificaton.robot
@@ -0,0 +1,146 @@
+*** Settings ***
+
+Documentation          Module to test IPMI network functionality.
+Resource               ../lib/ipmi_client.robot
+Resource               ../lib/openbmc_ffdc.robot
+Resource               ../lib/bmc_network_utils.robot
+Library                ../lib/ipmi_utils.py
+Library                ../lib/gen_robot_valid.py
+Library                ../lib/var_funcs.py
+Library                ../lib/bmc_network_utils.py
+
+Suite Setup            Redfish.Login
+Test Setup             Printn
+Test Teardown          FFDC On Test Case Fail
+
+Force Tags             IPMI_Network_Verify
+
+*** Test Cases ***
+
+Retrieve IP Address Via IPMI And Verify Using Redfish
+    [Documentation]  Retrieve IP address using IPMI and verify using Redfish.
+    [Tags]  Retrieve_IP_Address_Via_IPMI_And_Verify_Using_Redish
+
+    ${active_channel_config}=  Get Active Channel Config
+    FOR  ${channel_number}  IN  @{active_channel_config.keys()}
+      Verify Channel Info  ${channel_number}  IPv4StaticAddresses  ${active_channel_config}
+    END
+
+Retrieve Default Gateway Via IPMI And Verify
+    [Documentation]  Retrieve default gateway via IPMI and verify it's existence on the BMC.
+    [Tags]  Retrieve_Default_Gateway_Via_IPMI_And_Verify
+
+    ${lan_print_ipmi}=  Get LAN Print Dict
+
+    Verify Gateway On BMC  ${lan_print_ipmi['Default Gateway IP']}
+
+
+Retrieve MAC Address Via IPMI And Verify Using Redfish
+    [Documentation]  Retrieve MAC address via IPMI and verify using Redfish.
+    [Tags]  Retrieve_MAC_Address_Via_IPMI_And_Verify_Using_Redfish
+
+    ${active_channel_config}=  Get Active Channel Config
+    FOR  ${channel_number}  IN  @{active_channel_config.keys()}
+      Verify Channel Info  ${channel_number}  MACAddress  ${active_channel_config}
+    END
+
+
+Test Valid IPMI Channels Supported
+    [Documentation]  Verify IPMI channels supported on a given system.
+    [Tags]  Test_Valid_IPMI_Channels_Supported
+
+    ${channel_count}=  Get Physical Network Interface Count
+
+    # Note: IPMI network channel logically starts from 1.
+    FOR  ${channel_number}  IN RANGE  1  ${channel_count}
+      Run IPMI Standard Command  lan print ${channel_number}
+    END
+
+
+Test Invalid IPMI Channel Response
+    [Documentation]  Verify invalid IPMI channels supported response.
+    [Tags]  Test_Invalid_IPMI_Channel_Response
+
+    ${channel_count}=  Get Physical Network Interface Count
+
+    # To target invalid channel, increment count.
+    ${channel_number}=  Evaluate  ${channel_count} + 1
+
+    # Example of invalid channel:
+    # $ ipmitool -I lanplus -H xx.xx.xx.xx -P password lan print 3
+    # Get Channel Info command failed: Parameter out of range
+    # Invalid channel: 3
+
+    ${stdout}=  Run External IPMI Standard Command
+    ...  lan print ${channel_number}  fail_on_err=${0}
+    Should Contain  ${stdout}  Invalid channel
+    ...  msg=IPMI channel ${channel_number} is invalid but seen working.
+
+
+Get IP Address Source And Verify Using Redfish
+    [Documentation]  Get IP address source and verify it using Redfish.
+    [Tags]  Get_IP_Address_Source_And_Verify_Using_Redfish
+
+    ${active_channel_config}=  Get Active Channel Config
+    ${lan_config}=  Get LAN Print Dict  ${CHANNEL_NUMBER}
+
+    ${ipv4_addresses}=  Redfish.Get Attribute
+    ...  /redfish/v1/Managers/bmc/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']}
+    ...  IPv4Addresses
+
+    FOR  ${ipv4_address}  IN  @{ipv4_addresses}
+      ${ip_address_source}=
+      ...  Set Variable if  '${ipv4_address['Address']}' == '${lan_config['IP Address']}'
+      ...  ${ipv4_address['AddressOrigin']} Address
+      Exit For Loop IF  "${ip_address_source}" != 'None'
+    END
+
+    Valid Value  lan_config['IP Address Source']  ['${ip_address_source}']
+
+
+*** Keywords ***
+
+Get Physical Network Interface Count
+    [Documentation]  Return valid physical network interfaces count.
+    # Example:
+    # link/ether 22:3a:7f:70:92:cb brd ff:ff:ff:ff:ff:ff
+    # link/ether 0e:8e:0d:6b:e9:e4 brd ff:ff:ff:ff:ff:ff
+
+    ${mac_entry_list}=  Get BMC MAC Address List
+    ${mac_unique_list}=  Remove Duplicates  ${mac_entry_list}
+    ${physical_interface_count}=  Get Length  ${mac_unique_list}
+
+    [Return]  ${physical_interface_count}
+
+
+Verify Channel Info
+    [Documentation]  Verify the channel info.
+    [Arguments]  ${channel_number}  ${network_parameter}  ${active_channel_config}
+
+    Run Keyword If  '${network_parameter}' == 'IPv4StaticAddresses'
+    ...    Verify IPv4 Static Address  ${channel_number}  ${active_channel_config}
+    ...  ELSE IF  '${network_parameter}' == 'MACAddress'
+    ...    Verify MAC Address  ${channel_number}  ${active_channel_config}
+
+
+Verify IPv4 Static Address
+    [Documentation]  Verify the IPv4 Static Address.
+    [Arguments]  ${channel_number}  ${active_channel_config}
+
+    ${lan_print_ipmi}=  Get LAN Print Dict  ${channel_number}
+    ${ipv4_static_addresses}=  Redfish.Get Attribute
+    ...  ${REDFISH_NW_ETH_IFACE}${active_channel_config['${channel_number}']['name']}  IPv4StaticAddresses
+    ${redfish_ips}=  Nested Get  Address  ${ipv4_static_addresses}
+    Rprint Vars  lan_print_ipmi  ipv4_static_addresses  redfish_ips
+    Valid Value  lan_print_ipmi['IP Address']  ${redfish_ips}
+
+
+Verify MAC Address
+    [Documentation]  Verify the MAC Address.
+    [Arguments]  ${channel_number}  ${active_channel_config}
+
+    ${lan_print_ipmi}=  Get LAN Print Dict  ${channel_number}
+    ${redfish_mac_address}=  Redfish.Get Attribute
+    ...  ${REDFISH_NW_ETH_IFACE}${active_channel_config['${channel_number}']['name']}  MACAddress
+    Rprint Vars  lan_print_ipmi  redfish_mac_address
+    Valid Value  lan_print_ipmi['MAC Address']  ['${redfish_mac_address}']