diff --git a/ipmi/test_ipmi_network.robot b/ipmi/test_ipmi_network.robot
deleted file mode 100644
index e96d584..0000000
--- a/ipmi/test_ipmi_network.robot
+++ /dev/null
@@ -1,277 +0,0 @@
-*** Settings ***
-
-Documentation          Module to test IPMI network functionality.
-Resource               ../lib/ipmi_client.robot
-Resource               ../lib/openbmc_ffdc.robot
-Resource               ../lib/bmc_network_utils.robot
-Library                ../lib/ipmi_utils.py
-Library                ../lib/gen_robot_valid.py
-Library                ../lib/var_funcs.py
-Library                ../lib/bmc_network_utils.py
-
-Suite Setup            Suite Setup Execution
-Test Setup             Printn
-Test Teardown          FFDC On Test Case Fail
-
-Force Tags             IPMI_Network
-
-
-*** Variables ***
-${vlan_id}              ${10}
-@{vlan_ids}             ${20}  ${30}
-${interface}            eth0
-${ip}                   10.0.0.1
-${initial_lan_config}   &{EMPTY}
-${vlan_resource}        ${NETWORK_MANAGER}action/VLAN
-
-*** Test Cases ***
-
-Retrieve IP Address Via IPMI And Verify Using Redfish
-    [Documentation]  Retrieve IP address using IPMI and verify using Redfish.
-    [Tags]  Retrieve_IP_Address_Via_IPMI_And_Verify_Using_Redish
-
-    ${active_channel_config}=  Get Active Channel Config
-    FOR  ${channel_number}  IN  @{active_channel_config.keys()}
-      Verify Channel Info  ${channel_number}  IPv4StaticAddresses  ${active_channel_config}
-    END
-
-
-Retrieve Default Gateway Via IPMI And Verify
-    [Documentation]  Retrieve default gateway via IPMI and verify it's existence on the BMC.
-    [Tags]  Retrieve_Default_Gateway_Via_IPMI_And_Verify
-
-    ${lan_print_ipmi}=  Get LAN Print Dict
-
-    Verify Gateway On BMC  ${lan_print_ipmi['Default Gateway IP']}
-
-
-Retrieve MAC Address Via IPMI And Verify Using Redfish
-    [Documentation]  Retrieve MAC address via IPMI and verify using Redfish.
-    [Tags]  Retrieve_MAC_Address_Via_IPMI_And_Verify_Using_Redfish
-
-    ${active_channel_config}=  Get Active Channel Config
-    FOR  ${channel_number}  IN  @{active_channel_config.keys()}
-      Verify Channel Info  ${channel_number}  MACAddress  ${active_channel_config}
-    END
-
-
-Test Valid IPMI Channels Supported
-    [Documentation]  Verify IPMI channels supported on a given system.
-    [Tags]  Test_Valid_IPMI_Channels_Supported
-
-    ${channel_count}=  Get Physical Network Interface Count
-
-    # Note: IPMI network channel logically starts from 1.
-    FOR  ${channel_number}  IN RANGE  1  ${channel_count}
-      Run IPMI Standard Command  lan print ${channel_number}
-    END
-
-
-Test Invalid IPMI Channel Response
-    [Documentation]  Verify invalid IPMI channels supported response.
-    [Tags]  Test_Invalid_IPMI_Channel_Response
-
-    ${channel_count}=  Get Physical Network Interface Count
-
-    # To target invalid channel, increment count.
-    ${channel_number}=  Evaluate  ${channel_count} + 1
-
-    # Example of invalid channel:
-    # $ ipmitool -I lanplus -H xx.xx.xx.xx -P password lan print 3
-    # Get Channel Info command failed: Parameter out of range
-    # Invalid channel: 3
-
-    ${stdout}=  Run External IPMI Standard Command
-    ...  lan print ${channel_number}  fail_on_err=${0}
-    Should Contain  ${stdout}  Invalid channel
-    ...  msg=IPMI channel ${channel_number} is invalid but seen working.
-
-
-Verify IPMI Inband Network Configuration
-    [Documentation]  Verify BMC network configuration via inband IPMI.
-    [Tags]  Verify_IPMI_Inband_Network_Configuration
-    [Teardown]  Run Keywords  Restore Configuration  AND  FFDC On Test Case Fail
-
-    Redfish Power On
-
-    Set IPMI Inband Network Configuration  10.10.10.10  255.255.255.0  10.10.10.10
-    Sleep  10
-
-    ${lan_print_output}=  Get LAN Print Dict  ${CHANNEL_NUMBER}  ipmi_cmd_type=inband
-    Valid Value  lan_print_output['IP Address']  ["10.10.10.10"]
-    Valid Value  lan_print_output['Subnet Mask']  ["255.255.255.0"]
-    Valid Value  lan_print_output['Default Gateway IP']  ["10.10.10.10"]
-
-
-Get IP Address Source And Verify Using Redfish
-    [Documentation]  Get IP address source and verify it using Redfish.
-    [Tags]  Get_IP_Address_Source_And_Verify_Using_Redfish
-
-    ${active_channel_config}=  Get Active Channel Config
-    ${lan_config}=  Get LAN Print Dict  ${CHANNEL_NUMBER}
-
-    ${ipv4_addresses}=  Redfish.Get Attribute
-    ...  /redfish/v1/Managers/bmc/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']}
-    ...  IPv4Addresses
-
-    FOR  ${ipv4_address}  IN  @{ipv4_addresses}
-      ${ip_address_source}=
-      ...  Set Variable if  '${ipv4_address['Address']}' == '${lan_config['IP Address']}'
-      ...  ${ipv4_address['AddressOrigin']} Address
-      Exit For Loop IF  "${ip_address_source}" != 'None'
-    END
-
-    Valid Value  lan_config['IP Address Source']  ['${ip_address_source}']
-
-Disable VLAN Via IPMI When Multiple VLAN Exist On BMC
-    [Documentation]  Disable  VLAN Via IPMI When Multiple VLAN Exist On BMC.
-    [Tags]   Disable_VLAN_Via_IPMI_When_LAN_And_VLAN_Exist_On_BMC
-    [Teardown]  Run Keywords  FFDC On Test Case Fail  AND
-    ...  Create VLAN Via IPMI  off  AND  Restore Configuration
-
-    FOR  ${id}  IN  @{vlan_ids}
-      @{data_vlan_id}=  Create List  ${interface}  ${id}
-      ${data}=  Create Dictionary   data=@{data_vlan_id}
-      ${resp}=  OpenBMC Post Request  ${vlan_resource}  data=${data}
-    END
-
-    Create VLAN Via IPMI  off
-
-    ${lan_config}=  Get LAN Print Dict  ${CHANNEL_NUMBER}  ipmi_cmd_type=inband
-    Valid Value  lan_config['802.1q VLAN ID']  ['Disabled']
-
-
-Configure IP On VLAN Via IPMI
-    [Documentation]   Configure IP On VLAN Via IPMI.
-    [Tags]  Configure_IP_On_VLAN_Via_IPMI
-    [Teardown]  Run Keywords  FFDC On Test Case Fail  AND
-    ...  Create VLAN Via IPMI  off  AND  Restore Configuration
-
-    Create VLAN Via IPMI  ${vlan_id}
-
-    Run Inband IPMI Standard Command
-    ...  lan set ${CHANNEL_NUMBER} ipaddr ${ip}  login_host=${0}
-
-    ${lan_config}=  Get LAN Print Dict  ${CHANNEL_NUMBER}  ipmi_cmd_type=inband
-    Valid Value  lan_config['802.1q VLAN ID']  ['${vlan_id}']
-    Valid Value  lan_config['IP Address']  ["${ip}"]
-
-
-Create VLAN Via IPMI When LAN And VLAN Exist On BMC
-    [Documentation]  Create VLAN Via IPMI When LAN And VLAN Exist On BMC.
-    [Tags]   Create_VLAN_Via_IPMI_When_LAN_And_VLAN_Exist_On_BMC
-    [Teardown]  Run Keywords  FFDC On Test Case Fail  AND
-    ...  Create VLAN Via IPMI  off  AND  Restore Configuration
-
-    @{data_vlan_id}=  Create List  ${interface}  ${vlan_id}
-    ${data}=  Create Dictionary   data=@{data_vlan_id}
-    ${resp}=  OpenBMC Post Request  ${vlan_resource}  data=${data}
-
-    Create VLAN Via IPMI  ${vlan_id}
-
-    ${lan_config}=  Get LAN Print Dict  ${CHANNEL_NUMBER}  ipmi_cmd_type=inband
-    Valid Value  lan_config['802.1q VLAN ID']  ['${vlan_id}']
-
-
-*** Keywords ***
-
-Get Physical Network Interface Count
-    [Documentation]  Return valid physical network interfaces count.
-    # Example:
-    # link/ether 22:3a:7f:70:92:cb brd ff:ff:ff:ff:ff:ff
-    # link/ether 0e:8e:0d:6b:e9:e4 brd ff:ff:ff:ff:ff:ff
-
-    ${mac_entry_list}=  Get BMC MAC Address List
-    ${mac_unique_list}=  Remove Duplicates  ${mac_entry_list}
-    ${physical_interface_count}=  Get Length  ${mac_unique_list}
-
-    [Return]  ${physical_interface_count}
-
-
-Set IPMI Inband Network Configuration
-    [Documentation]  Run sequence of standard IPMI command in-band and set
-    ...              the IP configuration.
-    [Arguments]  ${ip}  ${netmask}  ${gateway}  ${login}=${1}
-
-    # Description of argument(s):
-    # ip       The IP address to be set using ipmitool-inband.
-    # netmask  The Netmask to be set using ipmitool-inband.
-    # gateway  The Gateway address to be set using ipmitool-inband.
-
-    Run Inband IPMI Standard Command
-    ...  lan set ${CHANNEL_NUMBER} ipsrc static  login_host=${login}
-    Run Inband IPMI Standard Command
-    ...  lan set ${CHANNEL_NUMBER} ipaddr ${ip}  login_host=${0}
-    Run Inband IPMI Standard Command
-    ...  lan set ${CHANNEL_NUMBER} netmask ${netmask}  login_host=${0}
-    Run Inband IPMI Standard Command
-    ...  lan set ${CHANNEL_NUMBER} defgw ipaddr ${gateway}  login_host=${0}
-
-
-Restore Configuration
-    [Documentation]  Restore the configuration to its pre-test state
-    ${length}=  Get Length  ${initial_lan_config}
-    Return From Keyword If  ${length} == ${0}
-
-    Set IPMI Inband Network Configuration  ${network_configurations[0]['Address']}
-    ...  ${network_configurations[0]['SubnetMask']}
-    ...  ${initial_lan_config['Default Gateway IP']}  login=${0}
-
-
-Verify Channel Info
-    [Documentation]  Verify the channel info.
-    [Arguments]  ${channel_number}  ${network_parameter}  ${active_channel_config}
-
-    Run Keyword If  '${network_parameter}' == 'IPv4StaticAddresses'
-    ...    Verify IPv4 Static Address  ${channel_number}  ${active_channel_config}
-    ...  ELSE IF  '${network_parameter}' == 'MACAddress'
-    ...    Verify MAC Address  ${channel_number}  ${active_channel_config}
-
-
-Verify IPv4 Static Address
-    [Documentation]  Verify the IPv4 Static Address.
-    [Arguments]  ${channel_number}  ${active_channel_config}
-
-    ${lan_print_ipmi}=  Get LAN Print Dict  ${channel_number}
-    ${ipv4_static_addresses}=  Redfish.Get Attribute
-    ...  ${REDFISH_NW_ETH_IFACE}${active_channel_config['${channel_number}']['name']}  IPv4StaticAddresses
-    ${redfish_ips}=  Nested Get  Address  ${ipv4_static_addresses}
-    Rprint Vars  lan_print_ipmi  ipv4_static_addresses  redfish_ips
-    Valid Value  lan_print_ipmi['IP Address']  ${redfish_ips}
-
-
-Verify MAC Address
-    [Documentation]  Verify the MAC Address.
-    [Arguments]  ${channel_number}  ${active_channel_config}
-
-    ${lan_print_ipmi}=  Get LAN Print Dict  ${channel_number}
-    ${redfish_mac_address}=  Redfish.Get Attribute
-    ...  ${REDFISH_NW_ETH_IFACE}${active_channel_config['${channel_number}']['name']}  MACAddress
-    Rprint Vars  lan_print_ipmi  redfish_mac_address
-    Valid Value  lan_print_ipmi['MAC Address']  ['${redfish_mac_address}']
-
-
-Create VLAN Via IPMI
-    [Documentation]  Create VLAN via inband IPMI command.
-    [Arguments]  ${vlan_id}  ${channel_number}=${CHANNEL_NUMBER}
-
-    # Description of argument(s):
-    # vlan_id  The VLAN ID (e.g. '10').
-
-    Run Inband IPMI Standard Command
-    ...  lan set ${channel_number} vlan id ${vlan_id}  login_host=${0}
-
-
-Suite Setup Execution
-    [Documentation]  Suite Setup Execution.
-
-    Redfish.Login
-
-    Run Inband IPMI Standard Command
-    ...  lan set ${CHANNEL_NUMBER} ipsrc static  login_host=${1}
-
-    @{network_configurations}=  Get Network Configuration
-    Set Suite Variable  @{network_configurations}
-
-    ${initial_lan_config}=  Get LAN Print Dict  ${CHANNEL_NUMBER}  ipmi_cmd_type=inband
-    Set Suite Variable  ${initial_lan_config}
diff --git a/ipmi/test_ipmi_network_configuration.robot b/ipmi/test_ipmi_network_configuration.robot
new file mode 100644
index 0000000..ab94df8
--- /dev/null
+++ b/ipmi/test_ipmi_network_configuration.robot
@@ -0,0 +1,150 @@
+*** Settings ***
+
+Documentation          Module to test IPMI network functionality.
+Resource               ../lib/ipmi_client.robot
+Resource               ../lib/openbmc_ffdc.robot
+Resource               ../lib/bmc_network_utils.robot
+Library                ../lib/ipmi_utils.py
+Library                ../lib/gen_robot_valid.py
+Library                ../lib/var_funcs.py
+Library                ../lib/bmc_network_utils.py
+
+Suite Setup            Suite Setup Execution
+Test Setup             Printn
+Test Teardown          FFDC On Test Case Fail
+
+Force Tags             IPMI_Network_Config
+
+
+*** Variables ***
+${vlan_id}              ${10}
+@{vlan_ids}             ${20}  ${30}
+${interface}            eth0
+${ip}                   10.0.0.1
+${initial_lan_config}   &{EMPTY}
+${vlan_resource}        ${NETWORK_MANAGER}action/VLAN
+
+*** Test Cases ***
+
+Verify IPMI Inband Network Configuration
+    [Documentation]  Verify BMC network configuration via inband IPMI.
+    [Tags]  Verify_IPMI_Inband_Network_Configuration
+    [Teardown]  Run Keywords  Restore Configuration  AND  FFDC On Test Case Fail
+
+    Redfish Power On
+
+    Set IPMI Inband Network Configuration  10.10.10.10  255.255.255.0  10.10.10.10
+    Sleep  10
+
+    ${lan_print_output}=  Get LAN Print Dict  ${CHANNEL_NUMBER}  ipmi_cmd_type=inband
+    Valid Value  lan_print_output['IP Address']  ["10.10.10.10"]
+    Valid Value  lan_print_output['Subnet Mask']  ["255.255.255.0"]
+    Valid Value  lan_print_output['Default Gateway IP']  ["10.10.10.10"]
+
+
+Disable VLAN Via IPMI When Multiple VLAN Exist On BMC
+    [Documentation]  Disable  VLAN Via IPMI When Multiple VLAN Exist On BMC.
+    [Tags]   Disable_VLAN_Via_IPMI_When_LAN_And_VLAN_Exist_On_BMC
+    [Teardown]  Run Keywords  FFDC On Test Case Fail  AND
+    ...  Create VLAN Via IPMI  off  AND  Restore Configuration
+
+    FOR  ${id}  IN  @{vlan_ids}
+      @{data_vlan_id}=  Create List  ${interface}  ${id}
+      ${data}=  Create Dictionary   data=@{data_vlan_id}
+      ${resp}=  OpenBMC Post Request  ${vlan_resource}  data=${data}
+    END
+
+    Create VLAN Via IPMI  off
+
+    ${lan_config}=  Get LAN Print Dict  ${CHANNEL_NUMBER}  ipmi_cmd_type=inband
+    Valid Value  lan_config['802.1q VLAN ID']  ['Disabled']
+
+
+Configure IP On VLAN Via IPMI
+    [Documentation]   Configure IP On VLAN Via IPMI.
+    [Tags]  Configure_IP_On_VLAN_Via_IPMI
+    [Teardown]  Run Keywords  FFDC On Test Case Fail  AND
+    ...  Create VLAN Via IPMI  off  AND  Restore Configuration
+
+    Create VLAN Via IPMI  ${vlan_id}
+
+    Run Inband IPMI Standard Command
+    ...  lan set ${CHANNEL_NUMBER} ipaddr ${ip}  login_host=${0}
+
+    ${lan_config}=  Get LAN Print Dict  ${CHANNEL_NUMBER}  ipmi_cmd_type=inband
+    Valid Value  lan_config['802.1q VLAN ID']  ['${vlan_id}']
+    Valid Value  lan_config['IP Address']  ["${ip}"]
+
+
+Create VLAN Via IPMI When LAN And VLAN Exist On BMC
+    [Documentation]  Create VLAN Via IPMI When LAN And VLAN Exist On BMC.
+    [Tags]   Create_VLAN_Via_IPMI_When_LAN_And_VLAN_Exist_On_BMC
+    [Teardown]  Run Keywords  FFDC On Test Case Fail  AND
+    ...  Create VLAN Via IPMI  off  AND  Restore Configuration
+
+    @{data_vlan_id}=  Create List  ${interface}  ${vlan_id}
+    ${data}=  Create Dictionary   data=@{data_vlan_id}
+    ${resp}=  OpenBMC Post Request  ${vlan_resource}  data=${data}
+
+    Create VLAN Via IPMI  ${vlan_id}
+
+    ${lan_config}=  Get LAN Print Dict  ${CHANNEL_NUMBER}  ipmi_cmd_type=inband
+    Valid Value  lan_config['802.1q VLAN ID']  ['${vlan_id}']
+
+
+*** Keywords ***
+
+Create VLAN Via IPMI
+    [Documentation]  Create VLAN via inband IPMI command.
+    [Arguments]  ${vlan_id}  ${channel_number}=${CHANNEL_NUMBER}
+
+    # Description of argument(s):
+    # vlan_id  The VLAN ID (e.g. '10').
+
+    Run Inband IPMI Standard Command
+    ...  lan set ${channel_number} vlan id ${vlan_id}  login_host=${0}
+
+
+Set IPMI Inband Network Configuration
+    [Documentation]  Run sequence of standard IPMI command in-band and set
+    ...              the IP configuration.
+    [Arguments]  ${ip}  ${netmask}  ${gateway}  ${login}=${1}
+
+    # Description of argument(s):
+    # ip       The IP address to be set using ipmitool-inband.
+    # netmask  The Netmask to be set using ipmitool-inband.
+    # gateway  The Gateway address to be set using ipmitool-inband.
+
+    Run Inband IPMI Standard Command
+    ...  lan set ${CHANNEL_NUMBER} ipsrc static  login_host=${login}
+    Run Inband IPMI Standard Command
+    ...  lan set ${CHANNEL_NUMBER} ipaddr ${ip}  login_host=${0}
+    Run Inband IPMI Standard Command
+    ...  lan set ${CHANNEL_NUMBER} netmask ${netmask}  login_host=${0}
+    Run Inband IPMI Standard Command
+    ...  lan set ${CHANNEL_NUMBER} defgw ipaddr ${gateway}  login_host=${0}
+
+
+Restore Configuration
+    [Documentation]  Restore the configuration to its pre-test state
+    ${length}=  Get Length  ${initial_lan_config}
+    Return From Keyword If  ${length} == ${0}
+
+    Set IPMI Inband Network Configuration  ${network_configurations[0]['Address']}
+    ...  ${network_configurations[0]['SubnetMask']}
+    ...  ${initial_lan_config['Default Gateway IP']}  login=${0}
+
+
+Suite Setup Execution
+    [Documentation]  Suite Setup Execution.
+
+    Redfish.Login
+
+    Run Inband IPMI Standard Command
+    ...  lan set ${CHANNEL_NUMBER} ipsrc static  login_host=${1}
+
+    @{network_configurations}=  Get Network Configuration
+    Set Suite Variable  @{network_configurations}
+
+    ${initial_lan_config}=  Get LAN Print Dict  ${CHANNEL_NUMBER}  ipmi_cmd_type=inband
+    Set Suite Variable  ${initial_lan_config}
diff --git a/ipmi/test_ipmi_network_verificaton.robot b/ipmi/test_ipmi_network_verificaton.robot
new file mode 100644
index 0000000..39bac45
--- /dev/null
+++ b/ipmi/test_ipmi_network_verificaton.robot
@@ -0,0 +1,146 @@
+*** Settings ***
+
+Documentation          Module to test IPMI network functionality.
+Resource               ../lib/ipmi_client.robot
+Resource               ../lib/openbmc_ffdc.robot
+Resource               ../lib/bmc_network_utils.robot
+Library                ../lib/ipmi_utils.py
+Library                ../lib/gen_robot_valid.py
+Library                ../lib/var_funcs.py
+Library                ../lib/bmc_network_utils.py
+
+Suite Setup            Redfish.Login
+Test Setup             Printn
+Test Teardown          FFDC On Test Case Fail
+
+Force Tags             IPMI_Network_Verify
+
+*** Test Cases ***
+
+Retrieve IP Address Via IPMI And Verify Using Redfish
+    [Documentation]  Retrieve IP address using IPMI and verify using Redfish.
+    [Tags]  Retrieve_IP_Address_Via_IPMI_And_Verify_Using_Redish
+
+    ${active_channel_config}=  Get Active Channel Config
+    FOR  ${channel_number}  IN  @{active_channel_config.keys()}
+      Verify Channel Info  ${channel_number}  IPv4StaticAddresses  ${active_channel_config}
+    END
+
+Retrieve Default Gateway Via IPMI And Verify
+    [Documentation]  Retrieve default gateway via IPMI and verify it's existence on the BMC.
+    [Tags]  Retrieve_Default_Gateway_Via_IPMI_And_Verify
+
+    ${lan_print_ipmi}=  Get LAN Print Dict
+
+    Verify Gateway On BMC  ${lan_print_ipmi['Default Gateway IP']}
+
+
+Retrieve MAC Address Via IPMI And Verify Using Redfish
+    [Documentation]  Retrieve MAC address via IPMI and verify using Redfish.
+    [Tags]  Retrieve_MAC_Address_Via_IPMI_And_Verify_Using_Redfish
+
+    ${active_channel_config}=  Get Active Channel Config
+    FOR  ${channel_number}  IN  @{active_channel_config.keys()}
+      Verify Channel Info  ${channel_number}  MACAddress  ${active_channel_config}
+    END
+
+
+Test Valid IPMI Channels Supported
+    [Documentation]  Verify IPMI channels supported on a given system.
+    [Tags]  Test_Valid_IPMI_Channels_Supported
+
+    ${channel_count}=  Get Physical Network Interface Count
+
+    # Note: IPMI network channel logically starts from 1.
+    FOR  ${channel_number}  IN RANGE  1  ${channel_count}
+      Run IPMI Standard Command  lan print ${channel_number}
+    END
+
+
+Test Invalid IPMI Channel Response
+    [Documentation]  Verify invalid IPMI channels supported response.
+    [Tags]  Test_Invalid_IPMI_Channel_Response
+
+    ${channel_count}=  Get Physical Network Interface Count
+
+    # To target invalid channel, increment count.
+    ${channel_number}=  Evaluate  ${channel_count} + 1
+
+    # Example of invalid channel:
+    # $ ipmitool -I lanplus -H xx.xx.xx.xx -P password lan print 3
+    # Get Channel Info command failed: Parameter out of range
+    # Invalid channel: 3
+
+    ${stdout}=  Run External IPMI Standard Command
+    ...  lan print ${channel_number}  fail_on_err=${0}
+    Should Contain  ${stdout}  Invalid channel
+    ...  msg=IPMI channel ${channel_number} is invalid but seen working.
+
+
+Get IP Address Source And Verify Using Redfish
+    [Documentation]  Get IP address source and verify it using Redfish.
+    [Tags]  Get_IP_Address_Source_And_Verify_Using_Redfish
+
+    ${active_channel_config}=  Get Active Channel Config
+    ${lan_config}=  Get LAN Print Dict  ${CHANNEL_NUMBER}
+
+    ${ipv4_addresses}=  Redfish.Get Attribute
+    ...  /redfish/v1/Managers/bmc/EthernetInterfaces/${active_channel_config['${CHANNEL_NUMBER}']['name']}
+    ...  IPv4Addresses
+
+    FOR  ${ipv4_address}  IN  @{ipv4_addresses}
+      ${ip_address_source}=
+      ...  Set Variable if  '${ipv4_address['Address']}' == '${lan_config['IP Address']}'
+      ...  ${ipv4_address['AddressOrigin']} Address
+      Exit For Loop IF  "${ip_address_source}" != 'None'
+    END
+
+    Valid Value  lan_config['IP Address Source']  ['${ip_address_source}']
+
+
+*** Keywords ***
+
+Get Physical Network Interface Count
+    [Documentation]  Return valid physical network interfaces count.
+    # Example:
+    # link/ether 22:3a:7f:70:92:cb brd ff:ff:ff:ff:ff:ff
+    # link/ether 0e:8e:0d:6b:e9:e4 brd ff:ff:ff:ff:ff:ff
+
+    ${mac_entry_list}=  Get BMC MAC Address List
+    ${mac_unique_list}=  Remove Duplicates  ${mac_entry_list}
+    ${physical_interface_count}=  Get Length  ${mac_unique_list}
+
+    [Return]  ${physical_interface_count}
+
+
+Verify Channel Info
+    [Documentation]  Verify the channel info.
+    [Arguments]  ${channel_number}  ${network_parameter}  ${active_channel_config}
+
+    Run Keyword If  '${network_parameter}' == 'IPv4StaticAddresses'
+    ...    Verify IPv4 Static Address  ${channel_number}  ${active_channel_config}
+    ...  ELSE IF  '${network_parameter}' == 'MACAddress'
+    ...    Verify MAC Address  ${channel_number}  ${active_channel_config}
+
+
+Verify IPv4 Static Address
+    [Documentation]  Verify the IPv4 Static Address.
+    [Arguments]  ${channel_number}  ${active_channel_config}
+
+    ${lan_print_ipmi}=  Get LAN Print Dict  ${channel_number}
+    ${ipv4_static_addresses}=  Redfish.Get Attribute
+    ...  ${REDFISH_NW_ETH_IFACE}${active_channel_config['${channel_number}']['name']}  IPv4StaticAddresses
+    ${redfish_ips}=  Nested Get  Address  ${ipv4_static_addresses}
+    Rprint Vars  lan_print_ipmi  ipv4_static_addresses  redfish_ips
+    Valid Value  lan_print_ipmi['IP Address']  ${redfish_ips}
+
+
+Verify MAC Address
+    [Documentation]  Verify the MAC Address.
+    [Arguments]  ${channel_number}  ${active_channel_config}
+
+    ${lan_print_ipmi}=  Get LAN Print Dict  ${channel_number}
+    ${redfish_mac_address}=  Redfish.Get Attribute
+    ...  ${REDFISH_NW_ETH_IFACE}${active_channel_config['${channel_number}']['name']}  MACAddress
+    Rprint Vars  lan_print_ipmi  redfish_mac_address
+    Valid Value  lan_print_ipmi['MAC Address']  ['${redfish_mac_address}']