diff --git a/lib/bmc_network_utils.robot b/lib/bmc_network_utils.robot
index 15d80ce..096cd5e 100644
--- a/lib/bmc_network_utils.robot
+++ b/lib/bmc_network_utils.robot
@@ -55,8 +55,10 @@
     #     link/ether xx:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff
     #     inet xx.xx.xx.xx/24 brd xx.xx.xx.xx scope global eth0
 
+    ${active_channel_config}=  Get Active Channel Config
+    ${ethernet_interface}=  Set Variable  ${active_channel_config['${CHANNEL_NUMBER}']['name']}
     ${cmd_output}  ${stderr}  ${rc}=  BMC Execute Command
-    ...  /sbin/ip addr | grep eth0
+    ...  /sbin/ip addr | grep ${ethernet_interface}
 
     # Get line having IP address details.
     ${lines}=  Get Lines Containing String  ${cmd_output}  inet
@@ -353,8 +355,11 @@
     #    "VLANEnable": false,
     #    "VLANId": 0
     #  }
+
+
     ${active_channel_config}=  Get Active Channel Config
-    ${resp}=  Redfish.Get  ${REDFISH_NW_ETH_IFACE}/${active_channel_config['${CHANNEL_NUMBER}']['name']}
+    ${resp}=  Redfish.Get  ${REDFISH_NW_ETH_IFACE}${active_channel_config['${CHANNEL_NUMBER}']['name']}
+
     @{network_configurations}=  Get From Dictionary  ${resp.dict}  IPv4StaticAddresses
     [Return]  @{network_configurations}
 
@@ -389,7 +394,10 @@
     Append To List  ${patch_list}  ${ip_data}
     ${data}=  Create Dictionary  IPv4StaticAddresses=${patch_list}
 
-    Redfish.patch  ${REDFISH_NW_ETH0_URI}  body=&{data}
+    ${active_channel_config}=  Get Active Channel Config
+    ${ethernet_interface}=  Set Variable  ${active_channel_config['${CHANNEL_NUMBER}']['name']}
+
+    Redfish.patch  ${REDFISH_NW_ETH_IFACE}${ethernet_interface}  body=&{data}
     ...  valid_status_codes=[${valid_status_codes}]
 
     Return From Keyword If  '${valid_status_codes}' != '${HTTP_OK}'
@@ -429,7 +437,10 @@
     # Run patch command only if given IP is found on BMC
     ${data}=  Create Dictionary  IPv4StaticAddresses=${patch_list}
 
-    Redfish.patch  ${REDFISH_NW_ETH0_URI}  body=&{data}
+    ${active_channel_config}=  Get Active Channel Config
+    ${ethernet_interface}=  Set Variable  ${active_channel_config['${CHANNEL_NUMBER}']['name']}
+
+    Redfish.patch  ${REDFISH_NW_ETH_IFACE}${ethernet_interface}  body=&{data}
     ...  valid_status_codes=[${valid_status_codes}]
 
     # Note: Network restart takes around 15-18s after patch request processing
diff --git a/redfish/managers/test_bmc_network_conf.robot b/redfish/managers/test_bmc_network_conf.robot
index 3ee5d16..3d82259 100644
--- a/redfish/managers/test_bmc_network_conf.robot
+++ b/redfish/managers/test_bmc_network_conf.robot
@@ -80,7 +80,10 @@
     [Documentation]  Get MAC address and verify it's existence on the BMC.
     [Tags]  Get_MAC_Address_And_Verify
 
-    ${resp}=  Redfish.Get  ${REDFISH_NW_ETH0_URI}
+    ${active_channel_config}=  Get Active Channel Config
+    ${ethernet_interface}=  Set Variable  ${active_channel_config['${CHANNEL_NUMBER}']['name']}
+
+    ${resp}=  Redfish.Get  ${REDFISH_NW_ETH_IFACE}${ethernet_interface}
     ${macaddr}=  Get From Dictionary  ${resp.dict}  MACAddress
     Validate MAC On BMC  ${macaddr}
 
@@ -432,7 +435,7 @@
     [Teardown]  Clear IP Settings On Fail  ${test_ipv4_addr}
 
     # ip               subnet_mask          gateway           valid_status_codes
-    ${test_ipv4_addr}  ${test_subnet_mask}  ${multicaste_ip}  ${HTTP_BAD_REQUEST}
+    ${test_ipv4_addr}  ${test_subnet_mask}  ${multicast_ip}  ${HTTP_BAD_REQUEST}
 
 Configure Broadcast IP For Gateway
     [Documentation]  Configure broadcast IP for gateway and expect an error.
@@ -559,7 +562,10 @@
     [Documentation]  Verify that nameservers obtained via Redfish do not
     ...  match those found in /etc/resolv.conf.
 
-    ${redfish_nameservers}=  Redfish.Get Attribute  ${REDFISH_NW_ETH0_URI}  StaticNameServers
+    ${active_channel_config}=  Get Active Channel Config
+    ${ethernet_interface}=  Set Variable  ${active_channel_config['${CHANNEL_NUMBER}']['name']}
+
+    ${redfish_nameservers}=  Redfish.Get Attribute  ${REDFISH_NW_ETH_IFACE}${ethernet_interface}  StaticNameServers
     ${resolve_conf_nameservers}=  CLI Get Nameservers
     Rqprint Vars  redfish_nameservers  resolve_conf_nameservers
 
@@ -578,8 +584,11 @@
     # static_name_servers  A list of static name server IPs to be
     #                      configured on the BMC.
 
+    ${active_channel_config}=  Get Active Channel Config
+    ${ethernet_interface}=  Set Variable  ${active_channel_config['${CHANNEL_NUMBER}']['name']}
+
     # Currently BMC is sending 500 response code instead of 400 for invalid scenarios.
-    Redfish.Patch  ${REDFISH_NW_ETH0_URI}  body={'StaticNameServers': ${static_name_servers}}
+    Redfish.Patch  ${REDFISH_NW_ETH_IFACE}${ethernet_interface}  body={'StaticNameServers': ${static_name_servers}}
     ...  valid_status_codes=[${valid_status_codes}, ${HTTP_INTERNAL_SERVER_ERROR}]
 
     # Patch operation takes 1 to 3 seconds to set new value.
@@ -608,7 +617,11 @@
 
     Redfish.Login
 
-    ${original_nameservers}=  Redfish.Get Attribute  ${REDFISH_NW_ETH0_URI}  StaticNameServers
+    ${active_channel_config}=  Get Active Channel Config
+    ${ethernet_interface}=  Set Variable  ${active_channel_config['${CHANNEL_NUMBER}']['name']}
+
+    ${original_nameservers}=  Redfish.Get Attribute  ${REDFISH_NW_ETH_IFACE}${ethernet_interface}  StaticNameServers
+
     Rprint Vars  original_nameservers
     # Set suite variables to trigger restoration during teardown.
     Set Suite Variable  ${original_nameservers}