*** Settings ***
Documentation  Connections and authentication module stability tests.

Resource  ../lib/bmc_redfish_resource.robot
Resource  ../lib/bmc_network_utils.robot
Resource  ../lib/openbmc_ffdc.robot
Resource  ../lib/resource.robot
Resource  ../lib/utils.robot
Resource  ../lib/connection_client.robot
Resource  ../gui/lib/gui_resource.robot
Library   ../lib/bmc_network_utils.py

Library   SSHLibrary
Library   Collections
Library   XvfbRobot
Library   OperatingSystem
Library   SeleniumLibrary  120  120
Library   Telnet  30 Seconds
Library   Screenshot


Suite Setup   Redfish.Logout

Variables  ../gui/data/gui_variables.py

*** Variables ***

${iterations}         10000
${loop_iteration}     ${1000}
${hostname}           testhostname
${MAX_UNAUTH_PER_IP}  ${5}
${bmc_url}            https://${OPENBMC_HOST}:${HTTPS_PORT}


*** Test Cases ***

Test Patch Without Auth Token Fails
    [Documentation]  Send patch method without auth token and verify it throws an error.
    [Tags]   Test_Patch_Without_Auth_Token_Fails

    ${active_channel_config}=  Get Active Channel Config
    ${ethernet_interface}=  Set Variable  ${active_channel_config['${CHANNEL_NUMBER}']['name']}

    Redfish.Patch  ${REDFISH_NW_ETH_IFACE}${ethernet_interface}  body={'HostName': '${hostname}'}
    ...  valid_status_codes=[${HTTP_UNAUTHORIZED}, ${HTTP_FORBIDDEN}]


Flood Patch Without Auth Token And Check Stability Of BMC
    [Documentation]  Flood patch method without auth token and check BMC stability.
    [Tags]  Flood_Patch_Without_Auth_Token_And_Check_Stability_Of_BMC

    @{fail_list}=  Create List

    ${active_channel_config}=  Get Active Channel Config
    ${ethernet_interface}=  Set Variable  ${active_channel_config['${CHANNEL_NUMBER}']['name']}

    FOR  ${iter}  IN RANGE  ${1}  ${iterations} + 1
        Log To Console  ${iter}th iteration Patch Request without valid session token
        # Expected valid fail status response code.
        Redfish.Patch  ${REDFISH_NW_ETH_IFACE}${ethernet_interface}  body={'HostName': '${hostname}'}
        ...  valid_status_codes=[${HTTP_UNAUTHORIZED}, ${HTTP_FORBIDDEN}]

        # Every 100th iteration, check BMC allows patch with auth token.
        ${status}=  Run Keyword If  ${iter} % 100 == 0  Run Keyword And Return Status
        ...  Login And Configure Hostname  ${REDFISH_NW_ETH_IFACE}${ethernet_interface}
        Run Keyword If  ${status} == False  Append To List  ${fail_list}  ${iter}
    END
    ${verify_count}=  Evaluate  ${iterations}/100
    ${fail_count}=  Get Length  ${fail_list}

    Should Be Equal As Integers  ${fail_count}  ${0}
    ...  msg=Patch operation failed ${fail_count} times in ${verify_count} attempts; fails at iterations ${fail_list}


Verify User Cannot Login After 5 Non-Logged In Sessions
    [Documentation]  User should not be able to login when there
    ...  are 5 non-logged in sessions.
    [Tags]  Verify_User_Cannot_Login_After_5_Non-Logged_In_Sessions
    [Setup]  Confirm Ability to Connect Then Close All Connections
    [Teardown]  Run Keywords  Process.Terminate All Processes  AND
    ...  SSHLibrary.Close All Connections  AND  FFDC On Test Case Fail

    FOR  ${iter}  IN RANGE  ${0}  ${MAX_UNAUTH_PER_IP}
       SSHLibrary.Open Connection  ${OPENBMC_HOST}
       Start Process  ssh ${OPENBMC_USERNAME}@${OPENBMC_HOST}  shell=True
    END

    SSHLibrary.Open Connection  ${OPENBMC_HOST}
    ${status}=   Run Keyword And Return Status  SSHLibrary.Login  ${OPENBMC_USERNAME}  ${OPENBMC_PASSWORD}

    Should Be Equal  ${status}  ${False}


Test Post Without Auth Token Fails
    [Documentation]  Send post method without auth token and verify it throws an error.
    [Tags]   Test_Post_Without_Auth_Token_Fails

    ${user_info}=  Create Dictionary
    ...  UserName=test_user  Password=TestPwd123  RoleId=Operator  Enabled=${True}
    Redfish.Post  /redfish/v1/AccountService/Accounts/  body=&{user_info}
    ...  valid_status_codes=[${HTTP_UNAUTHORIZED}, ${HTTP_FORBIDDEN}]


Flood Post Without Auth Token And Check Stability Of BMC
    [Documentation]  Flood post method without auth token and check BMC stability.
    [Tags]  Flood_Post_Without_Auth_Token_And_Check_Stability_Of_BMC

    @{fail_list}=  Create List

    ${user_info}=  Create Dictionary
    ...  UserName=test_user  Password=TestPwd123  RoleId=Operator  Enabled=${True}

    FOR  ${iter}  IN RANGE  ${1}  ${iterations} + 1
        Log To Console  ${iter}th iteration Post Request without valid session token
        # Expected valid fail status response code.
        Redfish.Post   /redfish/v1/AccountService/Accounts/  body=&{user_info}
        ...  valid_status_codes=[${HTTP_UNAUTHORIZED}, ${HTTP_FORBIDDEN}]

        # Every 100th iteration, check BMC allows post with auth token.
        ${status}=  Run Keyword If  ${iter} % 100 == 0  Run Keyword And Return Status
        ...  Login And Create User
        Run Keyword If  ${status} == False  Append To List  ${fail_list}  ${iter}
    END
    ${verify_count}=  Evaluate  ${iterations}/100
    ${fail_count}=  Get Length  ${fail_list}

    Should Be Equal As Integers  ${fail_count}  ${0}
    ...  msg=Post operation failed ${fail_count} times in ${verify_count} attempts; fails at iterations ${fail_list}


Make Large Number Of Wrong SSH Login Attempts And Check Stability
    [Documentation]  Check BMC stability with large number of SSH wrong login requests.
    [Tags]  Make_Large_Number_Of_Wrong_SSH_Login_Attempts_And_Check_Stability
    [Setup]  Set Account Lockout Threshold
    [Teardown]  FFDC On Test Case Fail

    SSHLibrary.Open Connection  ${OPENBMC_HOST}
    @{ssh_status_list}=  Create List
    FOR  ${iter}  IN RANGE  ${1}  ${loop_iteration} + 1
      Log To Console  ${iter}th iteration
      ${invalid_password}=   Catenate  ${OPENBMC_PASSWORD}${iter}
      Run Keyword and Ignore Error
      ...  Open Connection And Log In  ${OPENBMC_USERNAME}  ${invalid_password}

      # Every 100th iteration Login with correct credentials
      ${status}=   Run keyword If  ${iter} % ${100} == ${0}  Run Keyword And Return Status
      ...  Open Connection And Log In  ${OPENBMC_USERNAME}  ${OPENBMC_PASSWORD}
      Run Keyword If  ${status} == ${False}  Append To List  ${ssh_status_list}  ${status}
      SSHLibrary.Close Connection
    END

    ${valid_login_count}=  Evaluate  ${iterations}/100
    ${fail_count}=  Get Length  ${ssh_status_list}
    Should Be Equal  ${fail_count}  ${0}
    ...  msg= Login Failed ${fail_count} times in ${valid_login_count} attempts.


Test Stability On Large Number Of Wrong Login Attempts To GUI
    [Documentation]  Test stability on large number of wrong login attempts to GUI.
    [Tags]   Test_Stability_On_Large_Number_Of_Wrong_Login_Attempts_To_GUI

    @{status_list}=  Create List

    # Open headless browser.
    Start Virtual Display
    ${browser_ID}=  Open Browser  ${bmc_url}  alias=browser1
    Set Window Size  1920  1080

    Go To  ${bmc_url}

    FOR  ${iter}  IN RANGE  ${1}  ${iterations} + 1
        Log To Console  ${iter}th login
        Run Keyword And Ignore Error  Login to GUI With Incorrect Credentials

        # Every 100th iteration, check BMC GUI is responsive.
        ${status}=  Run Keyword If  ${iter} % 100 == 0  Run Keyword And Return Status
        ...  Open Browser  ${bmc_url}
        Append To List  ${status_list}  ${status}
        Run Keyword If  '${status}' == 'True'
        ...  Run Keywords  Close Browser  AND  Switch Browser  browser1
    END

    ${fail_count}=  Count Values In List  ${status_list}  False
    Run Keyword If  ${fail_count} > ${0}  FAIL  Could not open BMC GUI ${fail_count} times


Test BMC GUI Stability On Continuous Refresh Of GUI Home Page
    [Documentation]  Login to BMC GUI and keep refreshing home page and verify stability
        ...  by login at times in another browser.
    [Tags]  Test_BMC_GUI_Stability_On_Continuous_Refresh_Of_GUI_Home_Page
    [Teardown]  Close All Browsers

    @{failed_list}=  Create List

    # Open headless browser.
    Start Virtual Display
    ${browser_ID}=  Open Browser  ${bmc_url}  alias=browser1
    Set Window Size  1920  1080
    Login GUI

    FOR  ${iter}  IN RANGE  ${iterations}
        Log To Console  ${iter}th Refresh of home page

        Refresh GUI
        Continue For Loop If   ${iter}%100 != 0

        # Every 100th iteration, check BMC GUI is responsive.
        ${status}=  Run Keyword And Return Status
        ...  Run Keywords  Launch Browser And Login GUI  AND  Logout GUI
        Run Keyword If  '${status}' == 'False'  Append To List  ${failed_list}  ${iter}
        ...  ELSE IF  '${status}' == 'True'
        ...  Run Keywords  Close Browser  AND  Switch Browser  browser1
    END
    Log   ${failed_list}
    ${fail_count}=  Get Length  ${failed_list}
    Run Keyword If  ${fail_count} > ${0}  FAIL  Could not open BMC GUI ${fail_count} times


Test BMCweb Stability On Continuous Redfish Login Attempts With Invalid Credentials
    [Documentation]  Make invalid credentials Redfish login attempts continuously and
    ...  verify bmcweb stability by login to Redfish with valid credentials.
    [Tags]  Test_BMCweb_Stability_On_Continuous_Redfish_Login_Attempts_With_Invalid_Credentials

    Invalid Credentials Redfish Login Attempts


Test User Delete Operation Without Session Token And Expect Failure
    [Documentation]  Try to delete an object without valid session token and verifies it throws
    ...  an unauthorised error.
    [Tags]  Test_User_Delete_Operation_Without_Session_Token_And_Expect_Failure
    [Setup]  Redfish.Logout

    Redfish.Delete  /redfish/v1/AccountService/Accounts/test_user
    ...  valid_status_codes=[${HTTP_UNAUTHORIZED}]


Test Bmcweb Stability On Continuous Redfish Delete Operation Request Without Session Token
    [Documentation]  Send delete object request without valid session token continuously and
    ...  verify bmcweb stability by sending delete request with valid session token.
    [Tags]  Test_Bmcweb_Stability_On_Continuous_Redfish_Delete_Operation_Request_Without_Session_Token

    @{failed_iter_list}=  Create List

    FOR  ${iter}  IN RANGE  ${iterations}
        Log To Console  ${iter}th Redfish Delete Object Request without valid session token

        Run Keyword And Ignore Error
        ...  Redfish.Delete  /redfish/v1/AccountService/Accounts/test_user
        Continue For Loop If   ${iter}%100 != 0

        # Every 100th iteration, check delete operation with valid session token.
        ${status}=  Run Keyword And Return Status
        ...  Login And Delete User
        Run Keyword If  '${status}' == 'False'  Append To List  ${failed_iter_list}  ${iter}
    END
    Log  ${failed_iter_list}
    ${fail_count}=  Get Length  ${failed_iter_list}
    Run Keyword If  ${fail_count} > ${0}  FAIL  Could not do Redfish delete operation ${fail_count} times


Verify Flood Put Method Without Auth Token
    [Documentation]  Flood put method without auth token and check BMC stability.
    [Tags]  Verify_Flood_Put_Method_Without_Auth_Token
    [Teardown]  Delete All BMC Partition File

    @{status_list}=  Create List

    FOR  ${iter}  IN RANGE  ${1}  ${iterations}
        Log To Console  ${iter}th iteration
        Run Keyword And Ignore Error
        ...  Redfish.Put  ${LED_LAMP_TEST_ASSERTED_URI}attr/Asserted  body={"data":1}
        # Every 100th iteration, check BMC allows put with auth token.
        ${status}=  Run Keyword If  ${iter} % 100 == 0
        ...    Run Keyword And Return Status
        ...    Login And Upload Partition File To BMC
        Run Keyword If  ${status} == ${False}
        ...  Append To List  ${status_list}  ${status}
    END

    # Note the count for every 100 iterations.
    ${verify_count}=  Evaluate  ${iterations}/100
    ${fail_count}=  Get Length  ${status_list}

    Should Be Equal  ${fail_count}  ${0}
    ...  msg=Put operation failed ${fail_count} times in ${verify_count} attempts.


*** Keywords ***

Login And Configure Hostname
    [Documentation]  Login and configure hostname
    [Arguments]  ${ethernet_interface_uri}
    [Teardown]  Redfish.Logout

    # Description of argument(s):
    # ethernet_interface_uri   Network interface URI path.

    Redfish.Login

    Redfish.Patch  ${ethernet_interface_uri}  body={'HostName': '${hostname}'}
    ...  valid_status_codes=[${HTTP_OK}, ${HTTP_NO_CONTENT}]


Login And Create User
    [Documentation]  Login and create user
    [Teardown]  Run Keywords   Redfish.Delete  /redfish/v1/AccountService/Accounts/test_user
    ...  AND  Redfish.Logout

    Redfish.Login

    ${user_info}=  Create Dictionary
    ...  UserName=test_user  Password=TestPwd123  RoleId=ReadOnly  Enabled=${True}
    Redfish.Post  /redfish/v1/AccountService/Accounts/  body=&{user_info}
    ...  valid_status_codes=[${HTTP_OK}, ${HTTP_CREATED}]


Login And Delete User
    [Documentation]  Login create and delete user
    [Teardown]  Redfish.Logout

    Redfish.Login

    ${user_info}=  Create Dictionary
    ...  UserName=test_user  Password=TestPwd123  RoleId=ReadOnly  Enabled=${True}
    Redfish.Post  /redfish/v1/AccountService/Accounts/  body=&{user_info}
    ...  valid_status_codes=[${HTTP_OK}, ${HTTP_CREATED}]
    Redfish.Delete  /redfish/v1/AccountService/Accounts/test_user


Set Account Lockout Threshold
   [Documentation]  Set user account lockout threshold.
   [Teardown]  Redfish.Logout

   Redfish.Login
   Redfish.Patch  /redfish/v1/AccountService  body=[('AccountLockoutThreshold', 0)]


Login to GUI With Incorrect Credentials
    [Documentation]  Attempt to login to GUI as root, providing incorrect password argument.

    Input Text  ${xpath_login_username_input}  root
    Input Password  ${xpath_login_password_input}  incorrect_password
    Click Button  ${xpath_login_button}


Invalid Credentials Redfish Login Attempts
    [Documentation]  Continuous invalid credentials login attempts to Redfish and
    ...  login to Redfish with valid credentials at times and get failed login attempts.
    [Arguments]  ${login_username}=${OPENBMC_USERNAME}  ${login_password}=${OPENBMC_PASSWORD}

    # Description of argument(s):
    # login_username   username for login user.
    # login_password   password for login user.

    @{failed_iter_list}=  Create List

    FOR  ${iter}  IN RANGE  ${iterations}
        Log To Console  ${iter}th Redfish login with invalid credentials
        Run Keyword And Ignore Error  Redfish.Login   ${login_username}  incorrect_password
        Continue For Loop If   ${iter}%100 != 0

        # Every 100th iteration, check Redfish is responsive.
        ${status}=  Run Keyword And Return Status
        ...  Redfish.Login  ${login_username}   ${login_password}
        Run Keyword If  '${status}' == 'False'  Append To List  ${failed_iter_list}  ${iter}
        Redfish.Logout
    END
    Log  ${failed_iter_list}
    ${fail_count}=  Get Length  ${failed_iter_list}
    Run Keyword If  ${fail_count} > ${0}  FAIL  Could not Login to Redfish ${fail_count} times


Confirm Ability to Connect Then Close All Connections
    [Documentation]  Confirm that SSH login works, otherwise, skip this test.
    ...  If login succeeds, close all SSH connections to BMC to prepare for test.

    SSHLibrary.Close All Connections
    SSHLibrary.Open Connection  ${OPENBMC_HOST}
    ${status}=   Run Keyword And Return Status
    ...  SSHLibrary.Login  ${OPENBMC_USERNAME}  ${OPENBMC_PASSWORD}
    Skip If  ${status} == ${False}  msg= SSH Login failed: test will be skipped
    SSHLibrary.Close All Connections


Login And Upload Partition File To BMC
    [Documentation]  Upload partition file to BMC.

    Create Partition File
    Initialize OpenBMC

    # Get the content of the file and upload to BMC.
    ${image_data}=  OperatingSystem.Get Binary File  100-file
    ${headers}=  Create Dictionary  X-Auth-Token=${XAUTH_TOKEN}  Content-Type=application/octet-stream

    ${kwargs}=  Create Dictionary  data=${image_data}
    Set To Dictionary  ${kwargs}  headers  ${headers}
    ${resp}=  PUT On Session  openbmc  ${OEM_HOST_CONFIG_URI}/100-file  &{kwargs}  timeout=10
    Should Be Equal As Strings  ${resp.status_code}  ${HTTP_OK}
    Delete Local Partition File


Delete Local Partition File
    [Documentation]  Delete local partition file.

    ${file_exist}=  Run Keyword And Return Status  OperatingSystem.File Should Exist  100-file
    Run Keyword If  'True' == '${file_exist}'  Remove File  100-file


Create Partition File
    [Documentation]  Create Partition file.

    Delete Local Partition File

    @{words}=  Split String  100-file  -
    Run  dd if=/dev/zero of=100-file bs=${words}[-0] count=1
    OperatingSystem.File Should Exist  100-file


Delete All BMC Partition File
    [Documentation]  Delete multiple partition file on BMC via Redfish.

    Initialize OpenBMC
    ${data}=  Create Dictionary
    ${headers}=  Create Dictionary  X-Auth-Token=${XAUTH_TOKEN}
    Set To Dictionary  ${data}  headers  ${headers}

    ${resp}=  POST On Session  openbmc  ${OEM_HOST_CONFIG_ACTIONS_URI}.DeleteAll  &{data}
    Should Be Equal As Strings  ${resp.status_code}   ${HTTP_OK}

    Delete All Sessions