diff --git a/redfish/managers/test_bmc_dumps.robot b/redfish/managers/test_bmc_dumps.robot
index 3fa4382..c570a8c 100644
--- a/redfish/managers/test_bmc_dumps.robot
+++ b/redfish/managers/test_bmc_dumps.robot
@@ -52,12 +52,12 @@
 
     Redfish Power Off  stack_mode=skip
     ${dump_id}=  Create User Initiated BMC Dump Via Redfish
-    ${resp}=  Redfish.Get Properties  /redfish/v1/Managers/bmc/LogServices/Dump/Entries/${dump_id}
+    ${resp}=  Redfish.Get Properties  /redfish/v1/Managers/${MANAGER_ID}/LogServices/Dump/Entries/${dump_id}
 
     # Example of response from above Redfish GET request.
     # "@odata.type": "#LogEntry.v1_7_0.LogEntry",
     # "AdditionalDataSizeBytes": 31644,
-    # "AdditionalDataURI": "/redfish/v1/Managers/bmc/LogServices/Dump/attachment/9",
+    # "AdditionalDataURI": "/redfish/v1/Managers/${MANAGER_ID}/LogServices/Dump/attachment/9",
     # "Created": "2020-10-23T06:32:53+00:00",
     # "DiagnosticDataType": "Manager",
     # "EntryType": "Event",
@@ -87,7 +87,7 @@
 
     # Max size for dump is 20 MB = 20x1024x1024 Byte.
     ${resp}=  Redfish.Get Properties
-    ...  /redfish/v1/Managers/bmc/LogServices/Dump/Entries/${dump_entries[0]}
+    ...  /redfish/v1/Managers/${MANAGER_ID}/LogServices/Dump/Entries/${dump_entries[0]}
     Should Be True  0 < ${resp["AdditionalDataSizeBytes"]} < 20971520
 
 
@@ -153,13 +153,13 @@
 
     Redfish Power Off  stack_mode=skip
     Create User Initiated BMC Dump Via Redfish
-    ${dump_entries_before}=  redfish_utils.get_member_list  /redfish/v1/Managers/bmc/LogServices/Dump/Entries
+    ${dump_entries_before}=  redfish_utils.get_member_list  /redfish/v1/Managers/${MANAGER_ID}/LogServices/Dump/Entries
 
     # Restart dump service.
     BMC Execute Command  systemctl restart xyz.openbmc_project.Dump.Manager.service
     Sleep  10s  reason=Wait for BMC dump service to restart properly
 
-    ${dump_entries_after}=  redfish_utils.get_member_list  /redfish/v1/Managers/bmc/LogServices/Dump/Entries
+    ${dump_entries_after}=  redfish_utils.get_member_list  /redfish/v1/Managers/${MANAGER_ID}/LogServices/Dump/Entries
     Lists Should Be Equal  ${dump_entries_before}  ${dump_entries_after}
 
 
@@ -171,12 +171,12 @@
     Redfish Power Off  stack_mode=skip
 
     Create User Initiated BMC Dump Via Redfish
-    ${dump_entries_before}=  redfish_utils.get_member_list  /redfish/v1/Managers/bmc/LogServices/Dump/Entries
+    ${dump_entries_before}=  redfish_utils.get_member_list  /redfish/v1/Managers/${MANAGER_ID}/LogServices/Dump/Entries
 
     # Reset BMC.
     OBMC Reboot (off)  stack_mode=skip
 
-    ${dump_entries_after}=  redfish_utils.get_member_list  /redfish/v1/Managers/bmc/LogServices/Dump/Entries
+    ${dump_entries_after}=  redfish_utils.get_member_list  /redfish/v1/Managers/${MANAGER_ID}/LogServices/Dump/Entries
     Lists Should Be Equal  ${dump_entries_before}  ${dump_entries_after}
 
 
@@ -265,7 +265,7 @@
 
     # Check error while creating dump when dump size is full.
     ${payload}=  Create Dictionary  DiagnosticDataType=Manager
-    Redfish.Post  /redfish/v1/Managers/bmc/LogServices/Dump/Actions/LogService.CollectDiagnosticData
+    Redfish.Post  /redfish/v1/Managers/${MANAGER_ID}/LogServices/Dump/Actions/LogService.CollectDiagnosticData
     ...  body=${payload}  valid_status_codes=[${HTTP_INTERNAL_SERVER_ERROR}]
 
 
@@ -297,7 +297,7 @@
     Wait Until Keyword Succeeds  2 min  10 sec  Is BMC Dump Available
     ${dump_entries}=  Get BMC Dump Entries
     ${resp}=  Redfish.Get Properties
-    ...  /redfish/v1/Managers/bmc/LogServices/Dump/Entries/${dump_entries[0]}
+    ...  /redfish/v1/Managers/${MANAGER_ID}/LogServices/Dump/Entries/${dump_entries[0]}
 
     # Max size for dump is 20 MB = 20x1024x1024 Byte.
     Should Be True  0 < ${resp["AdditionalDataSizeBytes"]} < 20971520
@@ -313,7 +313,7 @@
     # Check error while initiating BMC dump while dump in progress.
     ${payload}=  Create Dictionary  DiagnosticDataType=Manager
     Redfish.Post
-    ...  /redfish/v1/Managers/bmc/LogServices/Dump/Actions/LogService.CollectDiagnosticData
+    ...  /redfish/v1/Managers/${MANAGER_ID}/LogServices/Dump/Actions/LogService.CollectDiagnosticData
     ...  body=${payload}  valid_status_codes=[${HTTP_SERVICE_UNAVAILABLE}]
 
     # Wait for above initiated dump to complete. Otherwise, on going dump would impact next test.
@@ -336,7 +336,7 @@
         ${task_dict}=  Redfish.Get Properties  /redfish/v1/TaskService/Tasks/${task_id}
         IF  '${task_dict['TaskState']}' == 'Completed'  BREAK
         ${resp}=  Redfish.Post
-        ...  /redfish/v1/Managers/bmc/LogServices/Dump/Actions/LogService.CollectDiagnosticData
+        ...  /redfish/v1/Managers/${MANAGER_ID}/LogServices/Dump/Actions/LogService.CollectDiagnosticData
         ...  body=${payload}  valid_status_codes=[${HTTP_SERVICE_UNAVAILABLE}, ${HTTP_ACCEPTED}]
 
         # Sample response of above POST request:
@@ -385,7 +385,7 @@
     # Wait for few seconds before initiating the dump.
     Sleep  2s
     ${resp}=  Redfish.Post
-    ...  /redfish/v1/Managers/bmc/LogServices/Dump/Actions/LogService.CollectDiagnosticData
+    ...  /redfish/v1/Managers/${MANAGER_ID}/LogServices/Dump/Actions/LogService.CollectDiagnosticData
     ...  body=${payload}  valid_status_codes=[${HTTP_ACCEPTED}]
 
     # Wait for above initiated dump to complete. Otherwise, on going dump would impact next test.
@@ -461,7 +461,7 @@
 Get BMC Dump Entries
     [Documentation]  Return BMC dump ids list.
 
-    ${dump_uris}=  redfish_utils.get_member_list  /redfish/v1/Managers/bmc/LogServices/Dump/Entries
+    ${dump_uris}=  redfish_utils.get_member_list  /redfish/v1/Managers/${MANAGER_ID}/LogServices/Dump/Entries
     ${dump_ids}=  Create List
 
     FOR  ${dump_uri}  IN  @{dump_uris}
diff --git a/redfish/managers/test_bmc_ipv6.robot b/redfish/managers/test_bmc_ipv6.robot
index edabf98..8ab1f92 100644
--- a/redfish/managers/test_bmc_ipv6.robot
+++ b/redfish/managers/test_bmc_ipv6.robot
@@ -105,7 +105,7 @@
     [Documentation]  Get Ipv6 network configuration.
     # Sample output:
     # {
-    #  "@odata.id": "/redfish/v1/Managers/bmc/EthernetInterfaces/eth0",
+    #  "@odata.id": "/redfish/v1/Managers/${MANAGER_ID}/EthernetInterfaces/eth0",
     #  "@odata.type": "#EthernetInterface.v1_4_1.EthernetInterface",
     #   "DHCPv4": {
     #    "DHCPEnabled": false,
@@ -176,7 +176,7 @@
     #    "State": "Enabled"
     #  },
     #  "VLANs": {
-    #    "@odata.id": "/redfish/v1/Managers/bmc/EthernetInterfaces/eth0/VLANs"
+    #    "@odata.id": "/redfish/v1/Managers/${MANAGER_ID}/EthernetInterfaces/eth0/VLANs"
 
 
     ${active_channel_config}=  Get Active Channel Config
diff --git a/redfish/managers/test_certificate.robot b/redfish/managers/test_certificate.robot
index dd2c6d4..4f62eb4 100644
--- a/redfish/managers/test_certificate.robot
+++ b/redfish/managers/test_certificate.robot
@@ -84,7 +84,7 @@
     [Teardown]  Run Keywords  FFDC On Test Case Fail  AND  Delete All CA Certificate Via Redfish
 
     # Get CA certificate count from BMC.
-    ${cert_list}=  Redfish_Utils.Get Member List  /redfish/v1/Managers/bmc/Truststore/Certificates
+    ${cert_list}=  Redfish_Utils.Get Member List  /redfish/v1/Managers/${MANAGER_ID}/Truststore/Certificates
     ${cert_count}=  Get Length  ${cert_list}
 
     # Install CA certificate to reach maximum count of 10.
@@ -125,7 +125,7 @@
     ${file_data}=  Decode Bytes To String  ${bytes}  UTF-8
 
     ${certificate_dict}=  Create Dictionary
-    ...  @odata.id=/redfish/v1/Managers/bmc/NetworkProtocol/HTTPS/Certificates/1
+    ...  @odata.id=/redfish/v1/Managers/${MANAGER_ID}/NetworkProtocol/HTTPS/Certificates/1
     ${payload}=  Create Dictionary  CertificateString=${file_data}
     ...  CertificateType=PEM  CertificateUri=${certificate_dict}
 
@@ -239,7 +239,7 @@
     ${Links}=  Get From Dictionary  ${resp.dict}  Links
 
     ${match_cert}=  Catenate
-    ...  /redfish/v1/Managers/bmc/Truststore/Certificates/${cert_id}
+    ...  /redfish/v1/Managers/${MANAGER_ID}/Truststore/Certificates/${cert_id}
     ${match}=  Set Variable  ${False}
 
     FOR  ${Certificates_dict}  IN  @{Links['Certificates']}
@@ -263,7 +263,7 @@
 Restore BMC Date
     [Documentation]  Restore BMC date to its prior value.
 
-    Redfish.Patch  ${REDFISH_BASE_URI}Managers/bmc  body={'DateTime': '${cli_date_time}'}
+    Redfish.Patch  ${REDFISH_BASE_URI}Managers/${MANAGER_ID}  body={'DateTime': '${cli_date_time}'}
     ...  valid_status_codes=[${HTTP_OK}]
 
 
diff --git a/redfish/managers/test_managers_bmc.robot b/redfish/managers/test_managers_bmc.robot
index a19a12b..9cd1bdd 100644
--- a/redfish/managers/test_managers_bmc.robot
+++ b/redfish/managers/test_managers_bmc.robot
@@ -27,7 +27,7 @@
     [Tags]  Verify_Redfish_BMC_Firmware_Version
 
     Redfish.Login
-    ${resp}=  Redfish.Get  /redfish/v1/Managers/bmc
+    ${resp}=  Redfish.Get  /redfish/v1/Managers/${MANAGER_ID}
     Should Be Equal As Strings  ${resp.status}  ${HTTP_OK}
     ${bmc_version}=  Get BMC Version
     Should Be Equal As Strings
@@ -39,7 +39,7 @@
     [Tags]  Verify_Redfish_BMC_Manager_Properties
 
     Redfish.Login
-    ${resp}=  Redfish.Get  /redfish/v1/Managers/bmc
+    ${resp}=  Redfish.Get  /redfish/v1/Managers/${MANAGER_ID}
     Should Be Equal As Strings  ${resp.status}  ${HTTP_OK}
     # Example:
     #  "Description": "Baseboard Management Controller"
@@ -83,12 +83,12 @@
         ...  ${active_channel_config["${channel_number}"]["is_valid"]}==${FALSE}
 
         # Get ethernet valid paths in redfish.
-        # Example: ['/redfish/v1/Managers/bmc/EthernetInterfaces']
+        # Example: ['/redfish/v1/Managers/${MANAGER_ID}/EthernetInterfaces']
         ${eth_interface}=  redfish_utils.Get Endpoint Path List
         ...  /redfish/v1/Managers/  EthernetInterfaces
 
         # Get the MACAddress attrivute value with the 'name': 'eth0'.
-        # Example: /redfish/v1/Managers/bmc/EthernetInterfaces/eth0
+        # Example: /redfish/v1/Managers/${MANAGER_ID}/EthernetInterfaces/eth0
         ${redfish_mac_addr}=  Redfish.Get Attribute
         ...  ${eth_interface[0]}/${active_channel_config["${channel_number}"]["name"]}
         ...  MACAddress
@@ -113,7 +113,7 @@
     #    "GracefulRestart",
     #    "ForceRestart"
     #  ],
-    #  "target": "/redfish/v1/Managers/bmc/Actions/Manager.Reset"
+    #  "target": "/redfish/v1/Managers/${MANAGER_ID}/Actions/Manager.Reset"
     # }
 
     ${test_file_path}=  Set Variable  /tmp/before_bmcreboot
@@ -143,7 +143,7 @@
     #    "GracefulRestart",
     #    "ForceRestart"
     #  ],
-    #  "target": "/redfish/v1/Managers/bmc/Actions/Manager.Reset"
+    #  "target": "/redfish/v1/Managers/${MANAGER_ID}/Actions/Manager.Reset"
     # }
 
     ${test_file_path}=  Set Variable  /tmp/before_bmcreboot
diff --git a/redfish/managers/test_managers_bmc_time.robot b/redfish/managers/test_managers_bmc_time.robot
index eea7496..a9796f9 100644
--- a/redfish/managers/test_managers_bmc_time.robot
+++ b/redfish/managers/test_managers_bmc_time.robot
@@ -201,7 +201,7 @@
 Redfish Get DateTime
     [Documentation]  Returns BMC Datetime value from Redfish.
 
-    ${date_time}=  Redfish.Get Attribute  ${REDFISH_BASE_URI}Managers/bmc  DateTime
+    ${date_time}=  Redfish.Get Attribute  ${REDFISH_BASE_URI}Managers/${MANAGER_ID}  DateTime
     [Return]  ${date_time}
 
 
@@ -225,7 +225,7 @@
     ...  ELSE
     ...  Set Variable  ${date_time}
     Wait Until Keyword Succeeds  1min  5sec
-    ...  Redfish.Patch  ${REDFISH_BASE_URI}Managers/bmc  body={'DateTime': '${date_time}'}  &{kwargs}
+    ...  Redfish.Patch  ${REDFISH_BASE_URI}Managers/${MANAGER_ID}  body={'DateTime': '${date_time}'}  &{kwargs}
 
 
 Set Time To Manual Mode
@@ -312,7 +312,7 @@
     Should Be True  '${time_diff}'<='3'
 
 Verify NTP Servers Are Populated
-    [Documentation]  Redfish GET request /redfish/v1/Managers/bmc/NetworkProtocol response
+    [Documentation]  Redfish GET request /redfish/v1/Managers/${MANAGER_ID}/NetworkProtocol response
     ...              and verify if NTP servers are populated.
 
     ${network_protocol}=  Redfish.Get Properties  ${REDFISH_NW_PROTOCOL_URI}
diff --git a/redfish/managers/test_multiple_interfaces_dhcp.robot b/redfish/managers/test_multiple_interfaces_dhcp.robot
index 35baaec..da4bfc6 100644
--- a/redfish/managers/test_multiple_interfaces_dhcp.robot
+++ b/redfish/managers/test_multiple_interfaces_dhcp.robot
@@ -54,7 +54,7 @@
 
     ${data}=  Set Variable If  ${dhcp_enabled} == ${False}  ${DISABLE_DHCP}  ${ENABLE_DHCP}
     ${resp}=  Redfish.Patch
-    ...  /redfish/v1/Managers/bmc/EthernetInterfaces/${interface}
+    ...  /redfish/v1/Managers/${MANAGER_ID}/EthernetInterfaces/${interface}
     ...  body=${data}  valid_status_codes=${valid_status_code}
 
 Suite Setup Execution