Enable/ Disable SLAAC on eth0/ eth1
Changes:
Enable/ Disable cases on eth0/ eth1 for SLAAC.
Tested:
Ran and Tested on BMC Environment.
Change-Id: Ic4457ac867f9b101cbe88ed7f9ce510f1f026e5a
Signed-off-by: Sweta Potthuri <spotthur@in.ibm.com>
diff --git a/lib/bmc_ipv6_utils.robot b/lib/bmc_ipv6_utils.robot
index c393583..1868907 100644
--- a/lib/bmc_ipv6_utils.robot
+++ b/lib/bmc_ipv6_utils.robot
@@ -91,18 +91,18 @@
Get Address Origin List And Address For Type
[Documentation] Get address origin list and address for type.
- [Arguments] ${ipv6_address_type}
+ [Arguments] ${ipv6_address_type} ${channel_number}=${CHANNEL_NUMBER}
# Description of the argument(s):
# ipv6_address_type Type of IPv6 address to be checked.
+ # channel_number Channel number 1(eth0) or 2(eth1).
${active_channel_config}= Get Active Channel Config
- ${ethernet_interface}= Set Variable ${active_channel_config['${CHANNEL_NUMBER}']['name']}
- ${resp}= Redfish.Get ${REDFISH_NW_ETH_IFACE}${active_channel_config['${CHANNEL_NUMBER}']['name']}
+ ${ethernet_interface}= Set Variable ${active_channel_config['${channel_number}']['name']}
+ ${resp}= Redfish.Get ${REDFISH_NW_ETH_IFACE}${active_channel_config['${channel_number}']['name']}
@{ipv6_addresses}= Get From Dictionary ${resp.dict} IPv6Addresses
${ipv6_addressorigin_list}= Create List
- ${ipv6_slaac_addr}= Set Variable ${None}
FOR ${ipv6_address} IN @{ipv6_addresses}
${ipv6_addressorigin}= Get From Dictionary ${ipv6_address} AddressOrigin
Append To List ${ipv6_addressorigin_list} ${ipv6_addressorigin}
diff --git a/redfish/managers/test_bmc_ipv6.robot b/redfish/managers/test_bmc_ipv6.robot
index ce17a9a..ba28526 100644
--- a/redfish/managers/test_bmc_ipv6.robot
+++ b/redfish/managers/test_bmc_ipv6.robot
@@ -223,18 +223,19 @@
Set And Verify DHCPv6 Property Enabled ${2}
-Enable And Verify SLAAC Property On Eth1 When SLAAC Property Enabled On Eth0
- [Documentation] Enable and verify SLAAC property on Eth1 when SLAAC property enabled on Eth0.
- [Tags] Enable_And_Verify_SLAAC_Property_On_Eth1_When_SLAAC_Property_Enabled_On_Eth0
+Verify Enable And Disable SLAAC On Both Interfaces
+ [Documentation] Verify enable and disable SLAAC on both the interfaces.
+ [Tags] Verify_Enable_And_Disable_SLAAC_On_Both_Interfaces
[Setup] Get The Initial SLAAC Settings
+ [Template] Set And Verify SLAAC Property On Both Interfaces
[Teardown] Run Keywords Set SLAAC Configuration State And Verify ${slaac_channel_1} [${HTTP_OK}] ${1}
... AND Set SLAAC Configuration State And Verify ${slaac_channel_2} [${HTTP_OK}] ${2}
- Set SLAAC Configuration State And Verify ${True} [${HTTP_OK}] ${1}
- Set SLAAC Configuration State And Verify ${True} [${HTTP_OK}] ${2}
-
- # Check all the addresses and address origins remain intact.
- Verify All The Addresses Are Intact
+ # slaac_eth0 slaac_eth1
+ ${True} ${True}
+ ${True} ${False}
+ ${False} ${True}
+ ${False} ${False}
Verify Autoconfig Is Present On Ethernet Interface
@@ -369,6 +370,7 @@
Set Suite variable ${ethernet_interface}
+ # Get initial IPv4 and IPv6 addresses and address origins for eth0.
${initial_ipv4_addressorigin_list} ${initial_ipv4_addr_list}= Get Address Origin List And IPv4 or IPv6 Address IPv4Addresses
${initial_ipv6_addressorigin_list} ${initial_ipv6_addr_list}= Get Address Origin List And IPv4 or IPv6 Address IPv6Addresses
@@ -377,6 +379,16 @@
Set Suite Variable ${initial_ipv6_addressorigin_list}
Set Suite Variable ${initial_ipv6_addr_list}
+ # Get initial IPv4 and IPv6 addresses and address origins for eth1.
+ ${eth1_initial_ipv4_addressorigin_list} ${eth1_initial_ipv4_addr_list}=
+ ... Get Address Origin List And IPv4 or IPv6 Address IPv4Addresses ${2}
+ ${eth1_initial_ipv6_addressorigin_list} ${eth1_initial_ipv6_addr_list}=
+ ... Get Address Origin List And IPv4 or IPv6 Address IPv6Addresses ${2}
+ Set Suite Variable ${eth1_initial_ipv4_addressorigin_list}
+ Set Suite Variable ${eth1_initial_ipv4_addr_list}
+ Set Suite Variable ${eth1_initial_ipv6_addressorigin_list}
+ Set Suite Variable ${eth1_initial_ipv6_addr_list}
+
Test Setup Execution
[Documentation] Test setup execution.
@@ -1125,7 +1137,7 @@
Get The Initial SLAAC Settings
[Documentation] Get the initial SLAAC settings of both the interfaces.
- Get The Initial SLAAC Setting On Each Interface ${1}
+ Get The Initial SLAAC Setting On Each Interface ${1}
Get The Initial SLAAC Setting On Each Interface ${2}
@@ -1148,12 +1160,13 @@
Get Address Origin List And IPv4 or IPv6 Address
[Documentation] Get address origin list and address for type.
- [Arguments] ${ip_address_type}
+ [Arguments] ${ip_address_type} ${channel_number}=${CHANNEL_NUMBER}
# Description of the argument(s):
# ip_address_type Type of IPv4 or IPv6 address to be checked.
+ # channel_number Channel number 1(eth0) or 2(eth1).
- ${resp}= Redfish.Get ${REDFISH_NW_ETH_IFACE}${active_channel_config['${CHANNEL_NUMBER}']['name']}
+ ${resp}= Redfish.Get ${REDFISH_NW_ETH_IFACE}${active_channel_config['${channel_number}']['name']}
@{ip_addresses}= Get From Dictionary ${resp.dict} ${ip_address_type}
${ip_addressorigin_list}= Create List
@@ -1168,21 +1181,26 @@
Verify All The Addresses Are Intact
[Documentation] Verify all the addresses and address origins remain intact.
+ [Arguments] ${channel_number}=${CHANNEL_NUMBER}
+ ... ${initial_ipv4_addressorigin_list}=${initial_ipv4_addressorigin_list}
+ ... ${initial_ipv4_addr_list}=${initial_ipv4_addr_list}
+
+ # Description of argument(s):
+ # channel_number Channel number 1(eth0) or 2(eth1).
+ # initial_ipv4_addressorigin_list Initial IPv4 address origin list.
+ # initial_ipv4_addr_list Initial IPv4 address list.
# Verify that it will not impact the IPv4 configuration.
Sleep ${NETWORK_TIMEOUT}
Wait For Host To Ping ${OPENBMC_HOST} ${NETWORK_TIMEOUT}
- # IPv6 address must be present.
- @{ipv6_addressorigin_list} ${ipv6_slaac_addr}= Get Address Origin List And Address For Type SLAAC
- @{ipv6_addressorigin_list} ${ipv6_linklocal_addr}= Get Address Origin List And Address For Type LinkLocal
+ # IPv6 Linklocal address must be present.
+ @{ipv6_addressorigin_list} ${ipv6_linklocal_addr}=
+ ... Get Address Origin List And Address For Type LinkLocal ${channel_number}
- # IPv4 and IPv6 addresses must remain intact.
- ${ipv4_addressorigin_list} ${ipv4_addr_list}= Get Address Origin List And IPv4 or IPv6 Address IPv4Addresses
- ${ipv6_addressorigin_list} ${ipv6_addr_list}= Get Address Origin List And IPv4 or IPv6 Address IPv6Addresses
-
- ${ipv6_is_subset}= Evaluate set(${initial_ipv6_addr_list}).issubset(set(${ipv6_addr_list}))
- Should Be True ${ipv6_is_subset}
+ # IPv4 addresses must remain intact.
+ ${ipv4_addressorigin_list} ${ipv4_addr_list}=
+ ... Get Address Origin List And IPv4 or IPv6 Address IPv4Addresses ${channel_number}
Should be Equal ${initial_ipv4_addressorigin_list} ${ipv4_addressorigin_list}
Should be Equal ${initial_ipv4_addr_list} ${ipv4_addr_list}
@@ -1228,3 +1246,40 @@
END
${interface_id}= Evaluate ':'.join(${expanded_ip}[-4:])
RETURN ${interface_id}
+
+
+Set And Verify SLAAC Property On Both Interfaces
+ [Documentation] Set and verify SLAAC property on both interfaces.
+ [Arguments] ${slaac_value_1} ${slaac_value_2}
+
+ # Description of the argument(s):
+ # slaac_value_1 SLAAC value for channel 1.
+ # slaac_value_2 SLAAC value for channel 2.
+
+ Set SLAAC Configuration State And Verify ${slaac_value_1} [${HTTP_OK}] ${1}
+ Set SLAAC Configuration State And Verify ${slaac_value_2} [${HTTP_OK}] ${2}
+
+ Sleep 30s
+
+ # Check SLAAC Settings for eth0.
+ @{ipv6_addressorigin_list} ${ipv6_slaac_addr}=
+ ... Get Address Origin List And IPv4 or IPv6 Address IPv6Addresses ${1}
+ IF "${slaac_value_1}" == "${True}"
+ Should Not Be Empty ${ipv6_slaac_addr} SLAAC
+ ELSE
+ Should Not Contain ${ipv6_addressorigin_list} SLAAC
+ END
+
+ # Check SLAAC Settings for eth1.
+ @{ipv6_addressorigin_list} ${ipv6_slaac_addr}=
+ ... Get Address Origin List And IPv4 or IPv6 Address IPv6Addresses ${2}
+ IF "${slaac_value_2}" == "${True}"
+ Should Not Be Empty ${ipv6_slaac_addr} SLAAC
+ ELSE
+ Should Not Contain ${ipv6_addressorigin_list} SLAAC
+ END
+
+ Verify All The Addresses Are Intact ${1}
+ Verify All The Addresses Are Intact ${2}
+ ... ${eth1_initial_ipv4_addressorigin_list} ${eth1_initial_ipv4_addr_list}
+