diff --git a/ipmi/test_ipmi_chassis.robot b/ipmi/test_ipmi_chassis.robot
index 880283b..28376fe 100644
--- a/ipmi/test_ipmi_chassis.robot
+++ b/ipmi/test_ipmi_chassis.robot
@@ -61,7 +61,8 @@
 
 
 Verify Chassis Power Cycle And Check Chassis Status Via IPMI
-    [Documentation]   Verify chassis power Cycle operation and check the Chassis Power Status using external IPMI command.
+    [Documentation]   Verify chassis power Cycle operation and check the Chassis
+    ...               Power Status using external IPMI command.
     [Tags]  Verify_Chassis_Power_Cycle_And_Check_Chassis_Status_Via_IPMI
 
     # Chassis power cycle command via IPMI
@@ -71,7 +72,8 @@
 
 
 Verify Chassis Power Reset And Check Chassis Status Via IPMI
-    [Documentation]   Verify chassis power Reset operation and check the Chassis Power Status using external IPMI command.
+    [Documentation]   Verify chassis power Reset operation and check the Chassis
+    ...               Power Status using external IPMI command.
     [Tags]  Verify_Chassis_Power_Reset_And_Check_Chassis_Status_Via_IPMI
 
     # Chassis power reset command via IPMI
diff --git a/ipmi/test_ipmi_cold_reset.robot b/ipmi/test_ipmi_cold_reset.robot
index 18c4f5b..ab7bcfb 100644
--- a/ipmi/test_ipmi_cold_reset.robot
+++ b/ipmi/test_ipmi_cold_reset.robot
@@ -92,7 +92,8 @@
     ...  Run IPMI Standard Command   sensor | grep -i RPM | grep "${sensor_name}"
 
     # Get sensor threshold readings after BMC restarts.
-    ${sensor_threshold_after_reset}  ${sensor_name_after_reset}=  Get The Sensor Name And Threshold  ${data_after_coldreset}
+    ${sensor_threshold_after_reset}  ${sensor_name_after_reset}=
+    ...  Get The Sensor Name And Threshold  ${data_after_coldreset}
 
     # Compare with initial sensor threshold values.
     Should Be Equal  ${sensor_threshold_after_reset}  ${initial_sensor_threshold}
@@ -173,7 +174,8 @@
 
 
 Set Sensor Threshold For given Sensor
-    [Documentation]  Set Sensor Threshold for given sensor with given Upper and Lower critical and non-critical values Via IPMI.
+    [Documentation]  Set Sensor Threshold for given sensor with given Upper and Lower critical
+    ...              and non-critical values Via IPMI.
     [Arguments]  ${threshold_list}  ${sensor}
 
     # Description of Argument(s):
diff --git a/ipmi/test_ipmi_inband_sdr.robot b/ipmi/test_ipmi_inband_sdr.robot
index 5619b9c..47e6ad7 100644
--- a/ipmi/test_ipmi_inband_sdr.robot
+++ b/ipmi/test_ipmi_inband_sdr.robot
@@ -201,7 +201,8 @@
 
 
 Verify Reserve Device SDR Repository For Partial Record
-    [Documentation]  Verify whether reservation ID of Reserve Device SDR Repository is accessible to fetch partial record from Get Device SDR.
+    [Documentation]  Verify whether reservation ID of Reserve Device SDR Repository is accessible
+    ...              to fetch partial record from Get Device SDR.
     [Tags]  Verify_Reserve_Device_SDR_Repository_For_Partial_Record
 
     # Get Reservation ID.
diff --git a/ipmi/test_ipmi_network_verificaton.robot b/ipmi/test_ipmi_network_verificaton.robot
index fd3e614..b1d4075 100644
--- a/ipmi/test_ipmi_network_verificaton.robot
+++ b/ipmi/test_ipmi_network_verificaton.robot
@@ -204,8 +204,9 @@
     ${Invalid_mac_address_hex}=  Mac Address To Hex String  ${Invalid_mac_address}
 
     # Set MAC Address with invalid data.
-    ${ipmi_set_output}=  Run Inband IPMI Raw Command
-    ...  ${IPMI_RAW_CMD['LAN_Config_Params']['Set'][0]} ${CHANNEL_NUMBER} 0x05 ${Invalid_mac_address_hex}  fail_on_err=0
+    ${cmd}=  Catenate  ${IPMI_RAW_CMD['LAN_Config_Params']['Set'][0]} ${CHANNEL_NUMBER}
+    ...  0x05 ${Invalid_mac_address_hex}  fail_on_err=0
+    ${ipmi_set_output}=  Run Inband IPMI Raw Command  ${cmd}
 
     Should Contain  ${ipmi_set_output}  ${IPMI_RAW_CMD['LAN_Config_Params']['Set'][3]}
 
@@ -220,8 +221,9 @@
     ${mac_address_hex}=  Mac Address To Hex String  ${set_mac_address}
 
     # Set the MAC address.
-    ${ipmi_set_output}=  Run Inband IPMI Raw Command
-    ...  ${IPMI_RAW_CMD['LAN_Config_Params']['Set'][0]} ${CHANNEL_NUMBER} 0x05 ${mac_address_hex}  fail_on_err=0
+    ${cmd}=  Catenate  ${IPMI_RAW_CMD['LAN_Config_Params']['Set'][0]} ${CHANNEL_NUMBER}
+    ...  0x05 ${mac_address_hex}  fail_on_err=0
+    ${ipmi_set_output}=  Run Inband IPMI Raw Command  ${cmd}
 
     # Get the MAC address and verify.
     ${ipmi_output}=  Run Inband IPMI Raw Command
@@ -273,7 +275,8 @@
 
     # Set IP address source to address loaded by BIOS or system software.
     ${ipmi_output}=  Run Keyword and Expect Error  *${IPMI_RAW_CMD['LAN_Config_Params']['Set'][3]}*
-    ...  Run Inband IPMI Raw Command  ${IPMI_RAW_CMD['LAN_Config_Params']['Set'][0]} 0x0${CHANNEL_NUMBER} 0x04 0x03
+    ...  Run Inband IPMI Raw Command
+    ...  ${IPMI_RAW_CMD['LAN_Config_Params']['Set'][0]} 0x0${CHANNEL_NUMBER} 0x04 0x03
 
 
 Verify IP Address Source Set To Address Obtained By BMC
@@ -283,7 +286,8 @@
 
     # Set IP address source to address obtained by BMC running other address assignment protocol
     ${ipmi_output}=  Run Keyword and Expect Error  *${IPMI_RAW_CMD['LAN_Config_Params']['Set'][3]}*
-    ...  Run Inband IPMI Raw Command  ${IPMI_RAW_CMD['LAN_Config_Params']['Set'][0]} 0x0${CHANNEL_NUMBER} 0x04 0x04
+    ...  Run Inband IPMI Raw Command
+    ...  ${IPMI_RAW_CMD['LAN_Config_Params']['Set'][0]} 0x0${CHANNEL_NUMBER} 0x04 0x04
 
 
 Verify IP Address Source Set To Unspecified Address Source
@@ -292,7 +296,8 @@
 
     # Set IP address source to unspecified address source.
     ${ipmi_output}=  Run Keyword and Expect Error  *${IPMI_RAW_CMD['LAN_Config_Params']['Set'][3]}*
-    ...  Run Inband IPMI Raw Command  ${IPMI_RAW_CMD['LAN_Config_Params']['Set'][0]} 0x0${CHANNEL_NUMBER} 0x04 0x00
+    ...  Run Inband IPMI Raw Command
+    ...  ${IPMI_RAW_CMD['LAN_Config_Params']['Set'][0]} 0x0${CHANNEL_NUMBER} 0x04 0x00
 
 
 *** Keywords ***
@@ -364,8 +369,9 @@
     ${default_mac_address_hex}=  Mac Address To Hex String  ${set_default_mac}
 
     # Set the Default MAC address.
-    ${ipmi_set_output}=  Run Inband IPMI Raw Command
-    ...  ${IPMI_RAW_CMD['LAN_Config_Params']['Set'][0]} ${CHANNEL_NUMBER} 0x05 ${default_mac_address_hex}  fail_on_err=0
+    ${cmd}=  Catenate  ${IPMI_RAW_CMD['LAN_Config_Params']['Set'][0]} ${CHANNEL_NUMBER}
+    ...  0x05 ${default_mac_address_hex}  fail_on_err=0
+    ${ipmi_set_output}=  Run Inband IPMI Raw Command  ${cmd}
 
     # check whether the default MAC is set.
     ${ipmi_get_mac}=  Run Inband IPMI Raw Command
diff --git a/ipmi/test_ipmi_poh_counter.robot b/ipmi/test_ipmi_poh_counter.robot
index 8f2ff85..ebe37a4 100644
--- a/ipmi/test_ipmi_poh_counter.robot
+++ b/ipmi/test_ipmi_poh_counter.robot
@@ -2,7 +2,8 @@
 Documentation       This suite tests IPMI POH Counter Support in OpenBMC.
 ...                 Feature: IPMI POH Counter Support
 ...
-...                 POH (Power-On Hours) counter is the incremental count of power ON hours in the system.
+...                 POH (Power-On Hours) counter is the incremental count of power ON
+...                 hours in the system.
 ...
 ...                 Request and Response data defined under data/ipmi_raw_cmd_table.py
 ...
@@ -17,9 +18,11 @@
 ...
 ...                 Minutes per count usually 60 minutes.
 ...
-...                 Wait Time given - 1 hour, 1 hour 30minutes when Host power OFF, 1 hour after Host Power ON
+...                 Wait Time given - 1 hour, 1 hour 30minutes when Host power OFF, 1 hour
+...                 after Host Power ON
 ...
-...                 Comparison between Initial POH Counter reading and reading after wait time / Power operation.
+...                 Comparison between Initial POH Counter reading and reading after wait
+...                 time / Power operation.
 
 
 Library             Collections
diff --git a/ipmi/test_ipmi_sel_time.robot b/ipmi/test_ipmi_sel_time.robot
index 694168a..028659a 100644
--- a/ipmi/test_ipmi_sel_time.robot
+++ b/ipmi/test_ipmi_sel_time.robot
@@ -1,18 +1,24 @@
 *** Settings ***
 
 Documentation    Module to test IPMI SEL Time functionality.
-...              Pre-requisite Condition : Client Machine and BMC should be in Same TimeZone (example : UST)
+...              Pre-requisite Condition : Client Machine and BMC should be in
+...              Same TimeZone (example : UST)
 ...
-...              IPMI Raw command variables are defined under ../data/ipmi_raw_command_table.py
-...              Python basic functionalities are defined under ../lib/functions.py imported under ../lib/resource.robot
+...              IPMI Raw command variables are defined under
+...              ../data/ipmi_raw_command_table.py
+...              Python basic functionalities are defined under
+...              ../lib/functions.py imported under ../lib/resource.robot
 ...
-...              Test the Set/Get SEL Time functionality and compare the result against BMC Native command (date).
+...              Test the Set/Get SEL Time functionality and compare the result against
+...              BMC Native command (date).
 ...
 ...              Set the Time Sync Mode from NTP to Manual to Set SEL Time.
 ...              Time Sync Mode change performed via REDFISH URI.
-...              Performs the change in Time Sync Mode with Test Setup and Teardown Execution with default NETWORK_TIMEOUT provided under ../lib/resource.robot.
+...              Performs the change in Time Sync Mode with Test Setup and Teardown Execution
+...              with default NETWORK_TIMEOUT provided under ../lib/resource.robot.
 ...
-...              NETWORK_RESTART_TIME added for Set SEL Time and Add SEL Entry as the corresponding command takes approx 5 seconds for the operation to reflect.
+...              NETWORK_RESTART_TIME added for Set SEL Time and Add SEL Entry as the corresponding
+...              command takes approx 5 seconds for the operation to reflect.
 ...
 ...              Current SEL time identified via BMC Native command (date) and perform SEL Time operations.
 ...
@@ -183,7 +189,8 @@
     ${sel_date_raw}=  Evaluate  " ".join(${sel_date_raw})
 
     # Set incomplete SEL Time with one less request byte.
-    ${Set_seltime_incomplete}=  Run Keyword and Expect Error  *${IPMI_RAW_CMD['SEL_entry']['Set_SEL_Time'][4]}*
+    ${Set_seltime_incomplete}=
+    ...  Run Keyword and Expect Error  *${IPMI_RAW_CMD['SEL_entry']['Set_SEL_Time'][4]}*
     ...  Run IPMI Command  ${IPMI_RAW_CMD['SEL_entry']['Set_SEL_Time'][0]} ${sel_date_raw}
     Should Contain  ${Set_seltime_incomplete}  ${IPMI_RAW_CMD['SEL_entry']['Set_SEL_Time'][3]}
 
diff --git a/ipmi/test_ipmi_systeminfo_parameters.robot b/ipmi/test_ipmi_systeminfo_parameters.robot
index f50ed3d..89b6d49 100644
--- a/ipmi/test_ipmi_systeminfo_parameters.robot
+++ b/ipmi/test_ipmi_systeminfo_parameters.robot
@@ -95,7 +95,8 @@
     ...  and expect to get the error message for invalid length.
     [Tags]  Verify_Get_System_Info_Set_In_Progress_With_Invalid_Data_Length
 
-    # Check if the Get System Info Parameter for param 0 - set in progress throws error for invalid data length.
+    # Check if the Get System Info Parameter for param 0 - set in progress throws
+    # error for invalid data length.
     Run Keyword and Expect Error  *${IPMI_RAW_CMD['System_Info']['param0_Set_In_Progress']['Get'][1]}*
     ...  Run IPMI Standard Command
     ...  raw ${IPMI_RAW_CMD['System_Info']['param0_Set_In_Progress']['Get'][0]} 0x00
@@ -106,7 +107,8 @@
     ...  and expect to get the error message for invalid length.
     [Tags]  Verify_Set_System_Info_Set_In_Progress_With_Invalid_Data_Length
 
-    # Check if the Set System Info Parameter for param 0 - set in progress throws error for invalid data length.
+    # Check if the Set System Info Parameter for param 0 - set in progress throws
+    # error for invalid data length.
     Run Keyword and Expect Error  *${IPMI_RAW_CMD['System_Info']['param0_Set_In_Progress']['Set'][1]}*
     ...  Run IPMI Standard Command
     ...  raw ${IPMI_RAW_CMD['System_Info']['param0_Set_In_Progress']['Set'][0]} 0x00 0x00
@@ -151,7 +153,8 @@
     ...  and expect to get the error message for invalid length.
     [Tags]  Verify_Get_System_Info_System_Firmware_Version_With_Invalid_Data_Length
 
-    # Check if the Get System Info Parameter for param 1 - System Firmware Version throws error for invalid data length.
+    # Check if the Get System Info Parameter for param 1 - System Firmware Version throws
+    # error for invalid data length.
     Run Keyword and Expect Error  *${IPMI_RAW_CMD['System_Info']['param1_System_Firmware_Version']['Get'][1]}*
     ...  Run IPMI Standard Command
     ...  raw ${IPMI_RAW_CMD['System_Info']['param1_System_Firmware_Version']['Get'][0]} 0x00
@@ -172,7 +175,8 @@
     ${firmware_version}  ${fw_hex_data}=  Identify Request Data  ${firmware_version}
     # Consider random string generated is 'zwclMXwfczMvcYz'.
     # The request data bytes will be 15 bytes, in which 14 bytes are only expected.
-    # Check if the Set System Info Parameter for param 1 - System Firmware Version throws error for invalid request data.
+    # Check if the Set System Info Parameter for param 1 - System Firmware Version throws
+    # error for invalid request data.
     Run Keyword and Expect Error  *${IPMI_RAW_CMD['System_Info']['param1_System_Firmware_Version']['Set'][1]}*
     ...  Run IPMI Standard Command
     ...  raw ${IPMI_RAW_CMD['System_Info']['param1_System_Firmware_Version']['Set'][0]} ${firmware_version}
@@ -208,7 +212,8 @@
     ...  and expect to get the error message for invalid length.
     [Tags]  Verify_Get_System_Info_System_Name_With_Invalid_Data_Length
 
-    # Check if the Get System Info Parameter for param 2 - System Name throws error for invalid request data length.
+    # Check if the Get System Info Parameter for param 2 - System Name throws error
+    # for invalid request data length.
     Run Keyword and Expect Error  *${IPMI_RAW_CMD['System_Info']['param2_System_Name']['Get'][1]}*
     ...  Run IPMI Standard Command
     ...  raw ${IPMI_RAW_CMD['System_Info']['param2_System_Name']['Get'][0]} 0x00
@@ -290,7 +295,8 @@
     ...  and expect to get the error message for invalid length.
     [Tags]  Verify_Get_System_Info_Primary_OS_Name_With_Invalid_Data_Length
 
-    # Check if the Get System Info Parameter for param 3 - Primary OS Name throws error for invalid request data.
+    # Check if the Get System Info Parameter for param 3 - Primary OS Name throws
+    # error for invalid request data.
     Run Keyword and Expect Error  *${IPMI_RAW_CMD['System_Info']['param3_Primary_OS_Name']['Get'][1]}*
     ...  Run IPMI Standard Command
     ...  raw ${IPMI_RAW_CMD['System_Info']['param3_Primary_OS_Name']['Get'][0]} 0x00
@@ -310,7 +316,8 @@
     # Here 15 bytes so, data 17 - extra byte.
     ${os_name}  ${name_hex_data}=  Identify Request Data  ${invalid_os_version}
 
-    # Check if the Set System Info Parameter for param 3 - Primary OS Name throws error for invalid data request.
+    # Check if the Set System Info Parameter for param 3 - Primary OS Name throws error
+    # for invalid data request.
     Run Keyword and Expect Error  *${IPMI_RAW_CMD['System_Info']['param3_Primary_OS_Name']['Set'][1]}*
     ...  Run IPMI Standard Command
     ...  raw ${IPMI_RAW_CMD['System_Info']['param3_Primary_OS_Name']['Set'][0]} ${os_name}
@@ -418,8 +425,10 @@
     ...  with extra bytes, and expect to get the error message for invalid length.
     [Tags]  Verify_Get_System_Info_Present_OS_Version_Number_With_Invalid_Data_Length
 
-    # Check if the Get System Info Parameter for param 5 - Present OS Version Number throws error for invalid request data.
-    Run Keyword and Expect Error  *${IPMI_RAW_CMD['System_Info']['param5_Present_OS_Version_number']['Get'][1]}*
+    # Check if the Get System Info Parameter for param 5 - Present OS Version Number throws
+    # error for invalid request data.
+    Run Keyword and Expect Error
+    ...  *${IPMI_RAW_CMD['System_Info']['param5_Present_OS_Version_number']['Get'][1]}*
     ...  Run IPMI Standard Command
     ...  raw ${IPMI_RAW_CMD['System_Info']['param5_Present_OS_Version_number']['Get'][0]} 0x00
 
@@ -438,8 +447,10 @@
     # Here 15 bytes so, data 17 - extra byte.
     ${os_name}  ${name_hex_data}=  Identify Request Data  ${invalid_os_version}
 
-    # Check if the Set System Info Parameter for param 5 - Present OS Version Number throws error for invalid request data.
-    Run Keyword and Expect Error  *${IPMI_RAW_CMD['System_Info']['param5_Present_OS_Version_number']['Set'][1]}*
+    # Check if the Set System Info Parameter for param 5 - Present OS Version Number throws
+    # error for invalid request data.
+    Run Keyword and Expect Error
+    ...  *${IPMI_RAW_CMD['System_Info']['param5_Present_OS_Version_number']['Set'][1]}*
     ...  Run IPMI Standard Command
     ...  raw ${IPMI_RAW_CMD['System_Info']['param5_Present_OS_Version_number']['Set'][0]} ${os_name}
 
@@ -495,7 +506,8 @@
 
 
 Get System Firmware Version
-    [Documentation]  Run Get system info parameter command for system firmware version and return response data.
+    [Documentation]  Run Get system info parameter command for system firmware version
+    ...              and return response data.
 
     # Get System Info Parameter for param 1 - System Firmware Version.
     ${resp}=  Run IPMI Standard Command
diff --git a/ipmi/test_ipmi_user.robot b/ipmi/test_ipmi_user.robot
index 4df791a..7cccf29 100644
--- a/ipmi/test_ipmi_user.robot
+++ b/ipmi/test_ipmi_user.robot
@@ -383,7 +383,8 @@
     Verify IPMI Command  ${random_username}  ${valid_password}  Administrator  ${CHANNEL_NUMBER}
 
     # Verify that user is unable to run IPMI command with channel 2.
-    Run IPMI Standard Command  sel info ${secondary_channel_number}  expected_rc=${1}  U=${random_username}  P=${valid_password}
+    Run IPMI Standard Command
+    ...  sel info ${secondary_channel_number}  expected_rc=${1}  U=${random_username}  P=${valid_password}
 
 
 Verify Operator And User Privilege For Different Channels