diff --git a/redfish/extended/test_basic_ci.robot b/redfish/extended/test_basic_ci.robot
new file mode 100644
index 0000000..5064324
--- /dev/null
+++ b/redfish/extended/test_basic_ci.robot
@@ -0,0 +1,99 @@
+*** Settings ***
+Documentation  Test for HW CI.
+
+Library             DateTime
+
+Resource            ../../lib/utils.robot
+Resource            ../../lib/ipmi_client.robot
+Resource            ../../lib/boot_utils.robot
+Resource            ../../lib/openbmc_ffdc.robot
+Resource            ../../lib/bmc_redfish_resource.robot
+
+Test Setup          Printn
+Test Teardown       FFDC On Test Case Fail
+
+*** Variables ***
+
+# Error strings to check from journald.
+${ERROR_REGEX}     SEGV|core-dump|FAILURE|Failed to start
+${STANDBY_REGEX}   Startup finished in
+
+# 3 minutes standby boot time.
+${startup_time_threshold}  180
+
+*** Test Cases ***
+
+Verify Application Services Running At Standby
+    [Documentation]  Check if there are services that have not completed.
+    [Tags]  Verify_Application_Services_Running_At_Standby
+
+    # Application services running on the BMC are not tightly coupled.
+    # At standby, there shouldn't be any pending job waiting to complete.
+    # Examples:
+    # Failure o/p:
+    # root@witherspoon:~# systemctl list-jobs --no-pager | cat
+    #    JOB UNIT                                     TYPE  STATE
+    # 35151 xyz.openbmc_project.ObjectMapper.service start running
+    # 1 jobs listed.
+    #
+    # Success o/p:
+    # root@witherspoon:~# systemctl list-jobs --no-pager | cat
+    # No jobs running.
+
+    Redfish Hard Power Off
+    ${stdout}  ${stderr}  ${rc}=  BMC Execute Command
+    ...  systemctl list-jobs --no-pager | cat
+    Should Be Equal As Strings  ${stdout}  No jobs running.
+
+
+Verify Front And Rear LED At Standby
+    [Documentation]  Front and Rear LED should be off at standby.
+    [Tags]  Verify_Front_And_Rear_LED_At_Standby
+
+    Redfish Power Off  stack_mode=skip  quiet=1
+    Verify Identify LED State  ${0}
+
+
+Check For Application Failures
+    [Documentation]  Parse the journal log and check for failures.
+    [Tags]  Check_For_Application_Failures
+
+    Check For Regex In Journald  ${ERROR_REGEX}  error_check=${0}  boot=-b
+
+
+Verify Uptime Average Against Threshold
+    [Documentation]  Compare BMC average boot time to a constant threshold.
+    [Tags]  Verify_Uptime_Average_Against_Threshold
+
+    Redfish OBMC Reboot (off)
+
+    Wait Until Keyword Succeeds
+    ...  1 min  30 sec  Check BMC Uptime Journald
+
+
+Test SSH And IPMI Connections
+    [Documentation]  Try SSH and IPMI commands to verify each connection.
+    [Tags]  Test_SSH_And_IPMI_Connections
+
+    BMC Execute Command  true
+    Run IPMI Standard Command  chassis status
+
+
+*** Keywords ***
+
+Check BMC Uptime Journald
+    [Documentation]  Check BMC journald uptime entry.
+
+    # Example output:
+    # Startup finished in 10.074s (kernel) + 2min 23.506s (userspace) = 2min 33.581s.
+    ${startup_time}  ${stderr}  ${rc}=  BMC Execute Command
+    ...  journalctl --no-pager | egrep '${STANDBY_REGEX}' | tail -1
+    Should Not Be Empty  ${startup_time}
+
+    # Example time conversion:
+    # Get the "2min 33.581s" string total time taken to reach standby.
+    # Convert time "2min 33.581s" to unit 153.581.
+    ${startup_time}=  Convert Time  ${startup_time.split("= ",1)[1].strip(".")}
+
+    Should Be True  ${startup_time} < ${startup_time_threshold}
+    ...  msg=${startup_time} greater than threshold value of ${startup_time_threshold}.