Modified suite setup and Added TC 'Create Multiple VLANs Via IPMI And Verify'
Change-Id: I65ff199cbb4374c46f06f45c7f2a00ffbc47664f
Signed-off-by: Anvesh Kumar Rayankula <anvesr77@in.ibm.com>
diff --git a/ipmi/test_ipmi_network_configuration.robot b/ipmi/test_ipmi_network_configuration.robot
index 4313480..c862ed4 100644
--- a/ipmi/test_ipmi_network_configuration.robot
+++ b/ipmi/test_ipmi_network_configuration.robot
@@ -94,9 +94,8 @@
${lan_config}= Get LAN Print Dict ${CHANNEL_NUMBER} ipmi_cmd_type=inband
Valid Value lan_config['802.1q VLAN ID'] ['${vlan_id_for_ipmi}']
- Valid Value lan_config['IP Address'] ['${network_configurations[0]['Address']}']
- Valid Value lan_config['Subnet Mask'] ['${network_configurations[0]['SubnetMask']}']
-
+ Valid Value lan_config['IP Address'] ['${ip_address}']
+ Valid Value lan_config['Subnet Mask'] ['${subnet_mask}']
Test Disabling Of VLAN Via IPMI
[Documentation] Disable VLAN and verify via IPMI.
@@ -121,6 +120,28 @@
Valid Value lan_config['802.1q VLAN ID'] ['${vlan_id_for_ipmi}']
Valid Value lan_config['IP Address'] ['${ip}']
+
+Create Multiple VLANs Via IPMI And Verify
+ [Documentation] Create multiple VLANs through IPMI.
+ [Tags] Create_Multiple_VLANs_Via_IPMI_And_Verify
+
+ FOR ${vlan_id} IN @{vlan_ids}
+
+ Create VLAN Via IPMI ${vlan_id}
+
+ ${lan_config}= Get LAN Print Dict ${CHANNEL_NUMBER} ipmi_cmd_type=inband
+
+ # Validate VLAN creation.
+ Valid Value lan_config['802.1q VLAN ID'] ['${vlan_id}']
+
+ # Validate existing IP address.
+ Valid Value lan_config['IP Address'] ['${ip_address}']
+
+ # Validate existing subnet mask.
+ Valid Value lan_config['Subnet Mask'] ['${subnet_mask}']
+ END
+
+
*** Keywords ***
Create VLAN Via IPMI
@@ -155,12 +176,12 @@
Restore Configuration
- [Documentation] Restore the configuration to its pre-test state
+ [Documentation] Restore the configuration to its pre-test state.
+
${length}= Get Length ${initial_lan_config}
Return From Keyword If ${length} == ${0}
- Set IPMI Inband Network Configuration ${network_configurations[0]['Address']}
- ... ${network_configurations[0]['SubnetMask']}
+ Set IPMI Inband Network Configuration ${ip_address} ${subnet_mask}
... ${initial_lan_config['Default Gateway IP']} login=${0}
@@ -168,16 +189,18 @@
[Documentation] Suite Setup Execution.
Redfish.Login
-
Run Inband IPMI Standard Command
... lan set ${CHANNEL_NUMBER} ipsrc static login_host=${1}
+ ${host_name} ${ip_address}= Get Host Name IP host=${OPENBMC_HOST}
+ Set Suite Variable ${ip_address}
+
@{network_configurations}= Get Network Configuration
- Set Suite Variable @{network_configurations}
-
- ${initial_lan_config}= Get LAN Print Dict ${CHANNEL_NUMBER} ipmi_cmd_type=inband
- Set Suite Variable ${initial_lan_config}
-
+ FOR ${network_configuration} IN @{network_configurations}
+ Run Keyword If '${network_configuration['Address']}' == '${ip_address}'
+ ... Run Keywords Set Suite Variable ${subnet_mask} ${network_configuration['SubnetMask']} AND
+ ... Exit For Loop
+ END
Test Teardown Execution
[Documentation] Test Teardown Execution.
@@ -185,4 +208,3 @@
FFDC On Test Case Fail
Create VLAN Via IPMI off
Restore Configuration
-