Resource variables and common HTX keywords
Resolves openbmc/openbmc-test-automation#633
Change-Id: I1d79c74d34f4ac3ee9c81d4e270486df1cfa34f0
Signed-off-by: George Keishing <gkeishin@in.ibm.com>
diff --git a/systest/htx_hardbootme_test.robot b/systest/htx_hardbootme_test.robot
index 38c60a1..db9d25c 100644
--- a/systest/htx_hardbootme_test.robot
+++ b/systest/htx_hardbootme_test.robot
@@ -2,7 +2,6 @@
Documentation Stress the system using HTX exerciser.
Resource ../syslib/utils_os.robot
-Library ../lib/gen_robot_print.py
Test Setup Pre Test Case Execution
Test Teardown Post Test Case Execution
@@ -11,21 +10,6 @@
${stack_mode} skip
-# Default duration and interval of HTX exerciser to run.
-${HTX_DURATION} 2 hours
-${HTX_INTERVAL} 15 min
-
-# Default hardbootme loop times HTX exerciser to run.
-${HTX_LOOP} 4
-
-# User-defined halt on error.
-${HTX_KEEP_RUNNING} ${0}
-
-# User-defined MDT profile.
-# There are a few stanzas in the HTX test exerciser that need to be removed
-# temporarily and manually built and executed.
-${HTX_MDT_PROFILE} mdt.bu
-
*** Test Cases ***
Hard Bootme Test
@@ -77,69 +61,6 @@
... AND Sleep ${HTX_INTERVAL}
-Check HTX Run Status
- [Documentation] Get HTX exerciser status and check for error.
-
- Rprint Timen Collect HTX status and error log files.
- Run Key U Collect HTX Log Files
-
- Rprint Timen Check HTX mdt Status and error.
- ${status}= Execute Command On OS
- ... htxcmdline -status -mdt ${HTX_MDT_PROFILE}
- Log ${status}
- Rprint Timen ${status}
-
- ${errlog}= Execute Command On OS htxcmdline -geterrlog
- Log ${errlog}
- Rprint Timen ${errlog}
-
- Should Contain ${errlog} file </tmp/htxerr> is empty
-
-
-Create Default MDT Profile
- [Documentation] Create default mdt.bu profile and run.
-
- Rprint Timen Create HTX mdt profile.
-
- ${profile}= Execute Command On OS htxcmdline -createmdt
- Rprint Timen ${profile}
- Should Contain ${profile} mdts are created successfully
-
-
-Run MDT Profile
- [Documentation] Load user pre-defined MDT profile.
-
- Rprint Timen Start HTX mdt profile execution.
- ${htx_run}= Execute Command On OS
- ... htxcmdline -run -mdt ${HTX_MDT_PROFILE}
- Rprint Timen ${htx_run}
- Should Contain ${htx_run} Activated
-
-
-Shutdown HTX Exerciser
- [Documentation] Shut down HTX exerciser run.
-
- Rprint Timen Shutdown HTX Run
- ${shutdown}= Execute Command On OS
- ... htxcmdline -shutdown -mdt ${HTX_MDT_PROFILE}
- Rprint Timen ${shutdown}
- Should Contain ${shutdown} shutdown successfully
-
-
-Pre Test Case Execution
- [Documentation] Do the initial test setup.
- # 1. Check if HTX tool exist.
- # 2. Power on
-
- Boot To OS
- Tool Exist htxcmdline
-
- # Shutdown if HTX is running.
- ${status}= Run Keyword And Return Status Is HTX Running
- Run Keyword If '${status}' == 'True'
- ... Shutdown HTX Exerciser
-
-
Post Test Case Execution
[Documentation] Do the post test teardown.
# 1. Shut down HTX exerciser if test Failed.
diff --git a/systest/network_stability_test.robot b/systest/network_stability_test.robot
index d2edbfd..cfc0119 100644
--- a/systest/network_stability_test.robot
+++ b/systest/network_stability_test.robot
@@ -12,13 +12,6 @@
${stack_mode} skip
-# Default duration and interval of HTX exerciser to run.
-${HTX_DURATION} 2 hours
-${HTX_INTERVAL} 15 min
-
-# Default iteration HTX exerciser to run.
-${HTX_LOOP} 4
-
*** Test Cases ***
Network Stability Test
@@ -47,15 +40,10 @@
# Post Power off and on, the OS SSH session needs to be established.
Login To OS
- Rprint Timen Create HTX mdt profile.
- ${profile}= Execute Command On OS htxcmdline -createmdt
- Rprint Timen ${profile}
- Should Contain ${profile} mdts are created successfully
+ Run Keyword If '${HTX_MDT_PROFILE}' == 'mdt.bu'
+ ... Create Default MDT Profile
- Rprint Timen Start HTX mdt profile execution.
- ${htx_run}= Execute Command On OS htxcmdline -run -mdt mdt.bu
- Rprint Timen ${htx_run}
- Should Contain ${htx_run} Activated
+ Run MDT Profile
# HTX is running, inject network traffic and check every HTX_INTERVAL
${status}= Run Until Keyword Fails ${HTX_DURATION} ${HTX_INTERVAL}
@@ -85,48 +73,15 @@
REST Upload File To BMC
-Check HTX Run Status
- [Documentation] Get HTX exerciser status and check for error.
-
- Rprint Timen Check HTX mdt Status and error.
- ${status}= Execute Command On OS htxcmdline -status -mdt mdt.bu
- Log ${status}
- Rprint Timen ${status}
-
- ${errlog}= Execute Command On OS htxcmdline -geterrlog
- Log ${errlog}
- Rprint Timen ${errlog}
-
- Should Contain ${errlog} file </tmp/htxerr> is empty
-
-
-Shutdown HTX Exerciser
- [Documentation] Shut down HTX exerciser run.
-
- Rprint Timen Shutdown HTX Run.
- ${shutdown}= Execute Command On OS htxcmdline -shutdown -mdt mdt.bu
- Rprint Timen ${shutdown}
- Should Contain ${shutdown} shutdown successfully
-
-
-Pre Test Case Execution
- [Documentation] Do the initial test setup.
- # 1. Check if HTX tool exist.
- # 2. Power on
-
- Boot To OS
- Tool Exist htxcmdline
-
-
Post Test Case Execution
[Documentation] Do the post test teardown.
# 1. Shut down HTX exerciser if test Failed.
# 2. Capture FFDC on test failure.
# 3. Close all open SSH connections.
- Run Keyword If '${TEST_STATUS}' == 'FAIL'
+ # Keep HTX running if user set HTX_KEEP_RUNNING to 1.
+ Run Keyword If '${TEST_STATUS}' == 'FAIL' and ${HTX_KEEP_RUNNING} == ${0}
... Shutdown HTX Exerciser
FFDC On Test Case Fail
Close All Connections
-