Generate Error On BMC And Verify If Trap Is Sent
Resolve openbmc/openbmc-test-automation#1763
Change-Id: I9ff7500e0497780d1fbf1a3aac05174f527a945f
Signed-off-by: Naman Navin Hegde <nhegde89@in.ibm.com>
diff --git a/snmp/test_bmc_snmp_config.robot b/snmp/test_bmc_snmp_config.robot
index f70eddf..6a81337 100644
--- a/snmp/test_bmc_snmp_config.robot
+++ b/snmp/test_bmc_snmp_config.robot
@@ -1,11 +1,12 @@
*** Settings ***
-Documentation This testing require special setup where SNMP trapd is
+Documentation This testing requires special setup where SNMP trapd is
... configured and installed. For download, installation and
... configuration refer http://www.net-snmp.org/.
Resource ../lib/snmp/resource.robot
Resource ../lib/snmp/snmp_utils.robot
Resource ../lib/openbmc_ffdc.robot
+Resource ../lib/logging_utils.robot
Library String
Library SSHLibrary
@@ -111,3 +112,18 @@
Delete SNMP Manager And Object ${SNMP_MGR2_IP} ${NON_DEFAULT_PORT1}
Delete SNMP Manager And Object ${SNMP_MGR3_IP} ${NON_DEFAULT_PORT2}
+Generate Error On BMC And Verify If Trap Is Sent
+ [Documentation] Generate Error On BMC And Verify If Trap Is Sent.
+ [Tags] Generate_Error_On_BMC_And_Verify_If_Trap_Is_Sent
+ [Setup] Install Tarball
+
+ Configure SNMP Manager On BMC ${SNMP_MGR1_IP} ${SNMP_DEFAULT_PORT} Valid
+
+ Start SNMP Manager
+ BMC Execute Command /tmp/tarball/bin/logging-test -c AutoTestSimple
+ SSHLibrary.Switch Connection snmp_server
+ ${SNMP_LISTEN_OUT}= Read delay=1s
+ SSHLibrary.Execute Command sudo killall snmptrapd
+
+ Should Contain ${SNMP_LISTEN_OUT} ${SNMP_TRAP_BMC_ERROR}
+ ... msg=Failed to receive trap message.