diff --git a/systest/test_boot_acceptance.robot b/systest/test_boot_acceptance.robot
new file mode 100644
index 0000000..8210bd8
--- /dev/null
+++ b/systest/test_boot_acceptance.robot
@@ -0,0 +1,89 @@
+*** Settings ***
+Documentation  Make a general hardware stress in a partition with all the
+...  resources available.
+
+# Test Parameters:
+# TYPE                EEH error function to use, default is 4.
+# OPENBMC_HOST        The BMC host name or IP address.
+# OS_HOST             The OS host name or IP Address.
+# OS_USERNAME         The OS login userid (usually root).
+# OS_PASSWORD         The password for the OS login.
+# HTX_DURATION        Duration of HTX run (e.g. "24 hours", "8 hours").
+# HTX_INTERVAL        The time delay between consecutive checks of HTX
+#                     status, for example, 30 minutes.
+#                     In summary: Run HTX for $HTX_DURATION, checking
+#                     every $HTX_INTERVAL.
+# HTX_MDT_PROFILE     MDT profile to be executed (e.g. "mdt.bu, net.mdt, etc")
+#                     default is "mdt.bu".
+# bootme_period       Bootme period where the system will be rebooting. (e.g.
+#                     "3") 3 = 1 hour period.
+
+# Expected result:
+# HTX runs mdt.bu and doesn't log errors during the acceptance execution.
+
+# Glossary:
+# MDT:
+#   Master device table is a collection of hardware devices on the system for
+#   which HTX exercisers can be run.
+# build_net:
+#   Script that configures every network port when connected to a loop. This
+#   skips the communication port to always keep it available.
+# mdt.bu:
+#   Default mdt file. Collection of all HTX exercisers. Aim is to test entire
+#   system concurrently.
+# HTX error log file /tmp/htxerr
+#   Records all the errors that occur. If there's no error during the test, it
+#   should be empty.
+# bootme:
+#   This configures the cron to reboot the system and re-run the HTX profile.
+
+Library         SSHLibrary
+Library         String
+Library         ../lib/bmc_ssh_utils.py
+Resource        ../lib/resource.txt
+Resource        ../syslib/utils_os.robot
+Resource        ../lib/bmc_network_utils.robot
+
+Suite Setup     Suite Setup Execution
+Suite Teardown  Collect HTX Log Files
+Test Teardown   FFDC On Test Case Fail
+
+*** Variables ***
+
+${HTX_DURATION}     8 hours
+${HTX_INTERVAL}     35 minutes
+${HTX_MDT_PROFILE}  mdt.bu
+${bootme_period}    3
+
+*** Test Cases ***
+
+Test Acceptance IPL
+    [Documentation]  Stress every controller connected via PCI in an OS with
+    ...  every resource available (CPU, RAM, storage, ethernet controllers,
+    ...  etc).
+    [Tags]  Test_Acceptance_IPL
+
+    Run Build Net
+    Run MDT Profile  ${HTX_MDT_PROFILE}
+    Run Soft Bootme
+    Repeat Keyword  ${HTX_DURATION}  Run Keywords
+    ...  Wait Until Keyword Succeeds  15 min  30 sec  Is OS Booted
+    ...  AND
+    ...  OS Execute Command  uptime
+    ...  AND
+    ...  Run Key U  sleep \ ${HTX_INTERVAL}
+    ...  AND
+    ...  Check HTX Run Status
+    ...  AND
+    ...  Wait Until Keyword Succeeds  20 min  10 sec  Is Host Off
+    Wait Until Keyword Succeeds  15 min  15 sec  Is OS Booted
+    Shutdown Bootme
+    Shutdown HTX Exerciser
+
+*** Keywords ***
+Suite Setup Execution
+    [Documentation]  Do setup tasks.
+
+    REST Power On  stack_mode=normal
+    Tool Exist  htxcmdline
+    Create Default MDT Profile