Add case to test Get Lan Configuration Parameters

Signed-off-by: Tony Lee <tony.lee@quantatw.com>
Change-Id: I2d81b5b54906b19afee79dd11c4352d7cde6acf7
diff --git a/ipmi/test_ipmi_network_verificaton.robot b/ipmi/test_ipmi_network_verificaton.robot
index 39bac45..5a1aaf6 100644
--- a/ipmi/test_ipmi_network_verificaton.robot
+++ b/ipmi/test_ipmi_network_verificaton.robot
@@ -8,6 +8,7 @@
 Library                ../lib/gen_robot_valid.py
 Library                ../lib/var_funcs.py
 Library                ../lib/bmc_network_utils.py
+Variables              ../data/ipmi_raw_cmd_table.py
 
 Suite Setup            Redfish.Login
 Test Setup             Printn
@@ -98,6 +99,56 @@
     Valid Value  lan_config['IP Address Source']  ['${ip_address_source}']
 
 
+Verify Get Set In Progress
+    [Documentation]  Verify Get Set In Progress which belongs to LAN Configuration Parameters
+    ...              via IPMI raw Command.
+
+    ${ipmi_output}=  Run IPMI Command
+    ...  ${IPMI_RAW_CMD['LAN_Config_Params']['Get'][0]} ${CHANNEL_NUMBER} 0x00 0x00 0x00
+
+    ${ipmi_output}=  Split String  ${ipmi_output}
+    ${set_in_progress_value}=  Set Variable  ${ipmi_output[1]}
+
+    # 00b = set complete.
+    # 01b = set in progress.
+    Should Contain Any  ${set_in_progress_value}  00  01
+
+
+Verify Cipher Suite Entry Count
+    [Documentation]  Verify cipher suite entry count which belongs to LAN Configuration Parameters
+    ...              via IPMI raw Command.
+
+    ${ipmi_output}=  Run IPMI Command
+    ...  ${IPMI_RAW_CMD['LAN_Config_Params']['Get'][0]} ${CHANNEL_NUMBER} 0x16 0x00 0x00
+    ${cipher_suite_entry_count}=  Split String  ${ipmi_output}
+
+    # Convert minor cipher suite entry count from BCD format to integer. i.e. 01 to 1.
+    ${cipher_suite_entry_count[1]}=  Convert To Integer  ${cipher_suite_entry_count[1]}
+    ${cnt}=  Get length  ${valid_ciphers}
+
+    Should be Equal  ${cipher_suite_entry_count[1]}  ${cnt}
+
+
+Verify Authentication Type Support
+    [Documentation]  Verify authentication type support which belongs to LAN Configuration Parameters
+    ...              via IPMI raw Command.
+
+    ${ipmi_output}=  Run IPMI Command
+    ...  ${IPMI_RAW_CMD['LAN_Config_Params']['Get'][0]} ${CHANNEL_NUMBER} 0x01 0x00 0x00
+
+    ${authentication_type_support}=  Split String  ${ipmi_output}
+    # All bits:
+    # 1b = supported
+    # 0b = authentication type not available for use
+    # [5] - OEM proprietary (per OEM identified by the IANA OEM ID in the RMCP Ping Response)
+    # [4] - straight password / key
+    # [3] - reserved
+    # [2] - MD5
+    # [1] - MD2
+    # [0] - none
+    Should Contain Any  ${authentication_type_support[1]}  00  01  02  03  04  05
+
+
 *** Keywords ***
 
 Get Physical Network Interface Count