diff --git a/tests/obmc_boot_test.robot b/tests/obmc_boot_test.robot
new file mode 100644
index 0000000..b7664bd
--- /dev/null
+++ b/tests/obmc_boot_test.robot
@@ -0,0 +1,186 @@
+*** Settings ***
+Documentation  Does random repeated IPLs based on the state of the machine. The
+...  number of repetitions is designated by ${IPL_TOTAL}. Keyword names that are
+...  listed in @{AVAIL_IPLS} become the selection of possible IPLs for the test.
+
+Resource  ../lib/boot/boot_resource_master.robot
+Resource  ../lib/dvt/obmc_call_points.robot
+Resource  ../lib/dvt/obmc_driver_vars.txt
+Resource  ../lib/list_utils.robot
+
+*** Test Cases ***
+Repeated Testing
+    [Documentation]  Performs random, repeated IPLs.
+
+    # Call the Main keyword to prevent any dots from appearing in the console
+    # due to top level keywords.
+    Main
+
+*** Keywords ***
+Main
+    Log to Console  ${SUITE NAME}
+
+    Do Test Setup
+    Call Point Setup
+
+    Log  Doing ${IPL_TOTAL} IPLs  console=True
+
+    :FOR  ${IPL_COUNT}  IN RANGE  ${IPL_TOTAL}
+    \  Log  ${\n}***Starting IPL ${IPL_COUNT+1} of ${IPL_TOTAL}***  console=True
+    \  Validate Or Open Connection  alias=${master_alias}
+    \  ${cur_state}=  Get Power State
+    \  ${next_IPL}=  Select IPL  ${cur_state}
+    \  Call Point Pre Boot
+    \  Log  We are doing a ${next_IPL}${\n}  console=True
+    \  Update Last Ten  ${next_IPL}
+    \  Run Keyword and Continue On Failure  Run IPL  ${next_IPL}
+    \  Call Point Post Boot
+    \  Run Keyword If  '${IPL_STATUS}' == 'PASS'
+    ...  Log  IPL_SUCCESS: "${next_IPL}" succeeded.  console=True
+    ...  ELSE  Log  IPL_FAILED: ${next_IPL} failed.  console=True
+    \  Update Run Table Values  ${next_IPL}
+    \  Log  FFDC Dump requested!  console=True
+    \  Log  ***Beginning dump of FFDC***  console=True
+    \  Call Point FFDC
+    \  Log Defect Information
+    \  Log Last Ten IPLs
+    \  Log FFDC Files
+    \  Log  ***Finished dumping of FFDC***  console=True
+    \  Call Point Stop Check
+    \  Log FFDC Summary
+    \  Log Run Table
+    \  Log  ${\n}***Finished IPL ${IPL_COUNT+1} of ${IPL_TOTAL}***  console=True
+
+Do Test Setup
+    [Documentation]  Do any setup that needs to be done before running a series
+    ...  of IPLs.
+
+    Should Not Be Empty  ${AVAIL_IPLS}
+
+    Setup Run Table
+    Log  ***Start of status file for ${OPENBMC_HOST}***  console=True
+
+Setup Run Table
+    [Documentation]  For each available IPL, create a variable that stores the
+    ...  number of passes and fails for each IPL.
+
+    Log to Console  Setting up run table.
+
+    :FOR  ${ipl}  IN  @{AVAIL_IPLS}
+    \  Set Global Variable  ${${ipl}_PASS}  ${0}
+    \  Set Global Variable  ${${ipl}_FAIL}  ${0}
+
+Select IPL
+    [Documentation]  Contains all of the logic for which IPLs can be chosen
+    ...  given the inputted state. Returns the chosen IPL.
+    [Arguments]  ${cur_state}
+
+    # cur_state      The power state of the machine, either zero or one.
+
+    ${ipl}=  Run Keyword If  ${cur_state} == ${0}  Select Power On
+    ...  ELSE  Run Keyword If  ${cur_state} == ${1}  Select Power Off
+    ...  ELSE  Run Keywords  Log to Console
+    ...  **ERROR** BMC not in state to power on or off: "${cur_state}"  AND
+    ...  Fatal Error
+
+    [return]  ${ipl}
+
+Select Power On
+    [Documentation]  Randomly chooses an IPL from the list of Power On IPLs.
+
+    @{power_on_choices}=  Intersect Lists  ${VALID_POWER_ON}  ${AVAIL_IPLS}
+
+    ${length}=  Get Length  ${power_on_choices}
+
+    # Currently selects the first IPL in the list of options, rather than
+    # selecting randomly.
+    ${chosen}=  Set Variable  @{power_on_choices}[0]
+
+    [return]  ${chosen}
+
+Select Power Off
+    [Documentation]  Randomly chooses an IPL from the list of Power Off IPLs.
+
+    @{power_off_choices}=  Intersect Lists  ${VALID_POWER_OFF}  ${AVAIL_IPLS}
+
+    ${length}=  Get Length  ${power_off_choices}
+
+    # Currently selects the first IPL in the list of options, rather than
+    # selecting randomly.
+    ${chosen}=  Set Variable  @{power_off_choices}[0]
+
+    [return]  ${chosen}
+
+Run IPL
+    [Documentation]  Runs the selected IPL and marks the status when complete.
+    [Arguments]  ${ipl_keyword}
+    [Teardown]  Set Global Variable  ${IPL_STATUS}  ${KEYWORD STATUS}
+
+    # ipl_keyword      The name of the IPL to run, which corresponds to the
+    #                  keyword to run. (i.e "BMC Power On")
+
+    Run Keyword  ${ipl_keyword}
+
+Log Defect Information
+    [Documentation]  Logs information needed for a defect. This information
+    ...  can also be found within the FFDC gathered.
+
+    Log  Copy this data to the defect:  console=True
+
+Log Last Ten IPLs
+    [Documentation]  Logs the last ten IPLs that were performed with their
+    ...  starting time stamp.
+
+    Log  ${\n}----------------------------------${\n}Last 10 IPLs${\n}
+    ...  console=True
+    :FOR  ${ipl}  IN  @{LAST_TEN}
+    \  Log  ${ipl}  console=True
+    Log  ----------------------------------${\n}  console=True
+
+Log FFDC Files
+    [Documentation]  Logs the files outputted during FFDC gathering.
+    Log  This is where the list of FFDC files would be.  console=True
+
+Log FFDC Summary
+    [Documentation]  Logs finding from within the FFDC files gathered.
+    Log  This is where the FFDC summary would go.  console=True
+
+Log Run Table
+    [Documentation]  Logs the table of IPLs that have passed and failed based on
+    ...  the available IPLs, as well as the total passes and failures.
+
+    Log  ${\n}IPL type${space*14}Pass${space*3}Fail  console=True
+    Log  ==================================  console=True
+    :FOR  ${ipl}  IN  @{AVAIL_IPLS}
+    \  ${length}=  Get Length  ${ipl}
+    \  ${space_num}=  Set Variable  ${24-${length}}
+    \  Log  ${ipl}${space*${space_num}}${${ipl}_PASS}${space*5}${${ipl}_FAIL}
+    ...  console=True
+    Log  ==================================  console=True
+    Log  Totals:${space*17}${IPL_PASSED}${space*5}${IPL_FAILED}${\n}
+    ...  console=True
+
+Update Run Table Values
+    [Documentation]  Updates the table of IPLs that have passed and failed. See
+    ...  the "Log Run Table" keyword for more information.
+    [Arguments]  ${last_ipl}
+
+    # last_ipl      The name of the last IPL that ran (i.e "BMC Power On").
+
+    ${cur_value}=  Get Variable Value  ${${last_ipl}_${IPL_STATUS}}
+    Set Global Variable  ${${last_ipl}_${IPL_STATUS}}  ${cur_value+1}
+    ${total_value}=  Run Keyword If  '${IPL_STATUS}' == 'PASS'
+    ...              Get Variable Value  ${IPL_PASSED}
+    ...              ELSE  Get Variable Value  ${IPL_FAILED}
+    Run Keyword If  '${IPL_STATUS}' == 'PASS'
+    ...             Set Global Variable  ${IPL_PASSED}  ${total_value+1}
+    ...             ELSE  Set Global Variable  ${IPL_FAILED}  ${total_value+1}
+
+Update Last Ten
+    [Documentation]  Updates the list of last ten IPLs
+    [Arguments]  ${last_ipl}
+
+    # last_ipl      The name of the last IPL that ran (i.e. "BMC Power On")
+
+    ${time}=  Get Time
+    Append to List  ${LAST_TEN}  ${time} - Doing "${last_ipl}"