*** Settings ***

Documentation   Test OpenBMC GUI "Date and time" sub-menu of "Settings".

Resource        ../../lib/gui_resource.robot

Suite Setup     Suite Setup Execution
Suite Teardown  Suite Teardown Execution
Test Setup      Navigate To Date and Time Page

*** Variables ***

${xpath_date_time_heading}       //h1[text()="Date and time"]
${xpath_select_manual}           //*[@data-test-id="dateTime-radio-configureManual"]
${xpath_select_ntp}              //*[@data-test-id="dateTime-radio-configureNTP"]
${xpath_manual_date}             //input[@data-test-id="dateTime-input-manualDate"]
${xpath_manual_time}             //input[@data-test-id="dateTime-input-manualTime"]
${xpath_ntp_server1}             //input[@data-test-id="dateTime-input-ntpServer1"]
${xpath_ntp_server2}             //input[@data-test-id="dateTime-input-ntpServer2"]
${xpath_ntp_server3}             //input[@data-test-id="dateTime-input-ntpServer3"]
${xpath_select_save_settings}    //button[@data-test-id="dateTime-button-saveSettings"]
${xpath_invalid_format_message}  //*[contains(text(), "Invalid format")]
${LOOP_COUNT}                    2

*** Test Cases ***

Verify Navigation To Date And Time Page
    [Documentation]  Verify navigation to date and time page.
    [Tags]  Verify_Navigation_To_Date_And_Time_Page

    Page Should Contain Element  ${xpath_date_time_heading}


Verify Existence Of All Sections In Date And Time Page
    [Documentation]  Verify existence of all sections in date and time page.
    [Tags]  Verify_Existence_Of_All_Sections_In_Date_And_Time_Page

    Page Should Contain  Configure settings


Verify Existence Of All Buttons In Date And Time Page
    [Documentation]  Verify existence of all buttons in date and time settings page.
    [Tags]  Verify_Existence_Of_All_Buttons_In_Date_And_Time_Page

    Page Should Contain Element  ${xpath_select_manual}
    Page Should Contain Element  ${xpath_select_ntp}
    Page Should Contain Element  ${xpath_select_save_settings}


Verify Existence Of All Input Boxes In Date And Time Page
    [Documentation]  Verify existence of all input boxes in date time page.
    [Tags]  Verify_Existence_Of_All_Input_Boxes_In_Date_And_Time_Page

    Click Element At Coordinates  ${xpath_select_manual}  0  0
    Page Should Contain Element  ${xpath_manual_date}
    Page Should Contain Element  ${xpath_manual_time}

    Click Element At Coordinates  ${xpath_select_ntp}  0  0
    Page Should Contain Element  ${xpath_ntp_server1}
    Page Should Contain Element  ${xpath_ntp_server2}
    Page Should Contain Element  ${xpath_ntp_server3}


Verify Date And Time From Configuration Section
    [Documentation]  Get date and time from configuration section and verify it via BMC CLI.
    [Tags]  Verify_Date_And_Time_From_Configuration_Section

    Click Element At Coordinates  ${xpath_select_manual}  0  0
    ${manual_date}=  Get Value  ${xpath_manual_date}
    ${manual_time}=  Get Value  ${xpath_manual_time}

    ${cli_date_time}=  CLI Get BMC DateTime
    Should contain  ${cli_date_time}  ${manual_date}  ${manual_time}


Verify Display Of Date And Time In GUI Page
     [Documentation]  Get date and time from Redfish and verify it via GUI date and time page.
     [Tags]  Verify_Display_Of_Date_And_Time_In_GUI_Page

    # Set Default timezone in profile settings page.
    Set Timezone In Profile Settings Page  Default
    Navigate To Date and Time Page

    # Get date and time from Redfish.
    ${redfish_date_time}=  CLI Get BMC DateTime
    ${redfish_date}=  Convert Date  ${redfish_date_time}  result_format=%Y-%m-%d
    ${redfish_time}=  Convert Date  ${redfish_date_time}  result_format=%H:%M

    # Verify date and time via GUI date and time page.

    Page Should Contain  ${redfish_date}
    Page Should Contain  ${redfish_time}


Verify Profile Setting Button In Date And Time Page
    [Documentation]  Verify navigation to profile setting page after clicking
    ...  on profile setting button in date and time page.
    [Tags]  Verify_Profile_Setting_Button_In_Date_And_Time_Page

    Click Element   ${xpath_profile_settings_link}
    Wait Until Page Contains Element  ${xpath_profile_settings_heading}  timeout=10
    Location Should Contain   profile-settings


Verify Existence Of Timezone Buttons In Profile Settings Page
    [Documentation]  Verify default UTC button and browser offset IST button
    ...  in Profile settings page
    [Tags]  Verify_Existence_Of_Timezone_Buttons_In_Profile_Settings_Page

    Click Element   ${xpath_profile_settings_link}
    Wait Until Page Contains Element  ${xpath_profile_settings_heading}  timeout=30
    Page Should Contain Element  ${xpath_default_UTC}
    Page Should Contain Element  ${xpath_browser_offset}


Verify Date And Time Change To Browser Offset Time
    [Documentation]  Verify date and time change to broswer's offset time when
    ...  'Browser offset' option is selected in Profile settings page.
    [Tags]   Verify_Date_And_Time_Change_To_Browser_Offset_Time

    Click Element   ${xpath_profile_settings_link}
    Wait Until Page Contains Element  ${xpath_profile_settings_heading}  timeout=10
    Click Element At Coordinates  ${xpath_browser_offset}  0  0
    Click Element   ${xpath_profile_save_button}
    ${xpath_browser_offset_text}=  Get Text  ${xpath_browser_offset_textfield}

    # We get an output ${xpath_browser_offset_text} = Browser offset (CST UTC-6).
    # Need to compare "CST UTC-6" text so removing the spaces and other values.

    ${text}=  Set Variable  ${xpath_browser_offset_text.split("(")[1].split(")")[0]}
    Navigate To Date and Time Page
    Page Should Contain  ${text}


Verify NTP Server Input Fields In Date And Time Page
    [Documentation]  Verify NTP server input fields in date and time page.
    [Tags]  Verify_NTP_Server_Input_Fields_In_Date_And_Time_Page
    [Setup]  Setup To Power Off And Navigate

    Click Element At Coordinates  ${xpath_select_ntp}  0  0
    Input Text  ${xpath_ntp_server1}  10.10.10.10
    Input Text  ${xpath_ntp_server2}  20.20.20.20
    Input Text  ${xpath_ntp_server3}  30.30.30.30
    Click Element  ${xpath_select_save_settings}


    # Refresh the NTP Page.
    Click Element  ${xpath_refresh_button}
    Wait Until Page Contains Element  ${xpath_select_ntp}  timeout=10s

    Textfield Value Should Be  ${xpath_ntp_server1}  10.10.10.10
    Textfield Value Should Be  ${xpath_ntp_server2}  20.20.20.20
    Textfield Value Should Be  ${xpath_ntp_server3}  30.30.30.30


Verify Setting Manual BMC Time
    [Documentation]  Verify changing manual time and comparing it with CLI time.
    [Tags]  Verify_Setting_Manual_BMC_Time
    [Setup]  Run Keywords  Set Timezone In Profile Settings Page
    ...  Default  AND  Setup To Power Off And Navigate

    Click Element At Coordinates  ${xpath_select_manual}  0  0
    Input Text  ${xpath_manual_date}  2023-05-12
    Input Text  ${xpath_manual_time}  15:30
    Click Element  ${xpath_select_save_settings}

    # Wait for changes to take effect.
    Sleep  120
    ${manual_date}=  Get Value  ${xpath_manual_date}
    ${manual_time}=  Get Value  ${xpath_manual_time}

    ${cli_date_time}=  CLI Get BMC DateTime
    Should contain  ${cli_date_time}  ${manual_date}  ${manual_time}


Verify Setting Invalid Date And Time Is Not Allowed
    [Documentation]  Verify if invalid date and invalid time input is given,
    ...  it should throw error.
    [Tags]  Verify_Setting_Invalid_Date_And_Time_Is_Not_Allowed
    [Setup]  Setup To Power Off And Navigate

    Click Element At Coordinates  ${xpath_select_manual}  0  0
    Input Text  ${xpath_manual_date}  2023-18-48
    Page Should Contain Element  ${xpath_invalid_format_message}
    Input Text  ${xpath_manual_time}  29:48
    Page Should Contain Element  ${xpath_invalid_format_message}


Verify Changing BMC Time From NTP To Manual
    [Documentation]  Verify that BMC time can be changed from NTP to
    ...  manual time via GUI.
    [Tags]  Verify_Changing_BMC_Time_From_NTP_To_Manual
    [Setup]  Setup To Power Off And Navigate

    # Add NTP server for BMC time to sync.
    Click Element At Coordinates  ${xpath_select_ntp}  0  0
    Input Text  ${xpath_ntp_server1}  time.google.com
    Click Element  ${xpath_select_save_settings}

    # Wait for changes to take effect.
    Wait Until Page Contains Element  ${xpath_select_ntp}  timeout=30s

    # Set the manual date and time.
    ${cli_date_time}=  CLI Get BMC DateTime
    ${date_changed}=  Add Time To Date  ${cli_date_time}  31 days
    ${date_changed}=  Add Time To Date  ${date_changed}  05:10:00
    Log  "Setting BMC date : ${date_changed} using Manual option"
    ${date}=  Convert Date  ${date_changed}  result_format=%Y-%m-%d
    ${time}=  Convert Date  ${date_changed}  result_format=%H:%M
    Click Element At Coordinates  ${xpath_select_manual}  0  0
    Input Text  ${xpath_manual_date}  ${date}
    Input Text  ${xpath_manual_time}  ${time}
    Click Element  ${xpath_select_save_settings}

    # Refresh the NTP Page.
    Click Element  ${xpath_refresh_button}
    Wait Until Page Contains  ${date}  timeout=60s
    Page Should Contain  ${time}

    # Wait for the "Saved Successfully" window to close automatically.
    Sleep  15


Verify Moving From Manual To NTP
    [Documentation]  Verify switching between manual mode and NTP mode.
    [Tags]  Verify_Moving_From_Manual_To_NTP
    [Setup]  Setup To Power Off And Navigate
    [Template]  Switch From Manual To NTP

    # loop_count
    ${LOOP_COUNT}


*** Keywords ***

Suite Setup Execution
   [Documentation]  Do test case setup tasks.

    Launch Browser And Login GUI
    Maximize Browser Window

Suite Teardown Execution
   [Documentation]  Do the post suite teardown.

    Logout GUI
    Close Browser

Setup To Power Off And Navigate
   [Documentation]  Power off system if not powered off and go to date and
   ...  time page.

   Redfish Power off  stack_mode=skip
   Navigate To Date and Time Page

Navigate To Date and Time Page
    [Documentation]  Navigate to the date and time page from main menu.

    Click Element  ${xpath_settings_menu}
    Click Element  ${xpath_date_time_sub_menu}
    Wait Until Keyword Succeeds  30 sec  10 sec  Location Should Contain  date-time
    Wait Until Element Is Not Visible   ${xpath_page_loading_progress_bar}  timeout=30

Set Manual Date and Time Via GUI
    [Documentation]  Set BMC date and time to one month in future via GUI.

    ${cli_date_time}=  CLI Get BMC DateTime
    ${new_date}=  Add Time To Date  ${cli_date_time}  31 days
    ${new_date_time}=  Add Time To Date  ${new_date}  05:10:00
    Log  "Setting BMC date : ${new_date_time} using Manual option"
    ${date}=  Convert Date  ${new_date_time}  result_format=%Y-%m-%d
    ${time}=  Convert Date  ${new_date_time}  result_format=%H:%M
    Click Element At Coordinates  ${xpath_select_manual}  0  0
    Input Text  ${xpath_manual_date}  ${date}
    Input Text  ${xpath_manual_time}  ${time}
    Click Element  ${xpath_select_save_settings}

    # Wait for changes to take effect.
    Wait Until Element Is Enabled  ${xpath_select_ntp}  timeout=30s

Switch From Manual To NTP
    [Documentation]  Verify switching from manual mode to NTP mode.
    [Arguments]  ${loop_count}=${LOOP_COUNT}

    # Description of argument(s):
    # loop_count        Number of loops to move from manual to NTP.

    FOR  ${x}  IN RANGE  ${loop_count}
       Set Manual Date and Time Via GUI
       # Set BMC date time to sync with NTP server.
       Click Element At Coordinates  ${xpath_select_ntp}  0  0
       Input Text  ${xpath_ntp_server1}  216.239.35.0
       Click Element  ${xpath_select_save_settings}

       # Wait until saved successfully message is visible.
       Wait Until Element Is Visible  ${xpath_success_message}  timeout=60

       ${cli_date_time}=  CLI Get BMC DateTime
       ${ntp_date}=  Convert Date  ${cli_date_time}  result_format=%Y-%m-%d
       ${ntp_time}=  Convert Date  ${cli_date_time}  result_format=%H:%M
       Wait Until Page Contains  ${ntp_date}   timeout=60s
       Page Should Contain  ${ntp_time}

       Wait Until Element Is Not Visible   ${xpath_success_message}  timeout=60
       Log  "Completed Loop for ${x} time"
    END