diff --git a/redfish/extended/test_remote_logging.robot b/redfish/extended/test_remote_logging.robot
new file mode 100644
index 0000000..758a0a9
--- /dev/null
+++ b/redfish/extended/test_remote_logging.robot
@@ -0,0 +1,392 @@
+*** Settings ***
+Documentation    Remote logging test for rsyslog.
+
+# Program arguments:
+# REMOTE_LOG_SERVER_HOST    The host name or IP address of the remote
+#                           logging server.
+# REMOTE_LOG_SERVER_PORT    The port number for the remote logging server.
+# REMOTE_USERNAME           The username for the remote logging server.
+# REMOTE_PASSWORD           The password for the remote logging server.
+
+Library          String
+Resource         ../../lib/openbmc_ffdc.robot
+Resource         ../../lib/boot_utils.robot
+Resource         ../../lib/remote_logging_utils.robot
+Resource         ../../lib/bmc_redfish_resource.robot
+Resource         ../../lib/ipmi_client.robot
+Resource         ../../lib/bmc_redfish_resource.robot
+Library          ../../lib/gen_misc.py
+
+Suite Setup      Suite Setup Execution
+Test Setup       Test Setup Execution
+Test Teardown    FFDC On Test Case Fail
+
+*** Variables ***
+
+# Strings to check from journald.
+${BMC_STOP_MSG}          Stopping Network IPMI daemon
+${BMC_START_MSG}         Starting Flush Journal to Persistent Storage
+${BMC_BOOT_MSG}          Startup finished in
+${BMC_SYSLOG_REGEX}      dropbear|vrm-control.sh
+${RSYSLOG_REGEX}         start|exiting on signal 15|there are no active actions configured
+${RSYSLOG_RETRY_REGEX}   suspended
+${valid_password}        0penBmc1
+
+*** Test Cases ***
+
+Test BMC Hostname Service And Verify
+    [Documentation]  Write to hostname interface and verify via REST and
+    ...              'hostname' command.
+    [Tags]  Test_BMC_Hostname_Service_And_Verify
+
+    ${openbmc_host_name}  ${openbmc_ip}  ${openbmc_short_name}=
+    ...  Get Host Name IP  host=${OPENBMC_HOST}  short_name=1
+
+    ${host_name_dict}=  Create Dictionary  data=${openbmc_short_name}
+    Write Attribute  ${NETWORK_MANAGER}config  HostName  data=${host_name_dict}
+    ...  verify=${TRUE}  expected_value=${openbmc_short_name}
+
+    ${hostname}  ${stderr}  ${rc}=  BMC Execute Command  hostname
+
+    Should Be Equal As Strings  ${hostname}  ${openbmc_short_name}
+    ...  msg=The hostname interface ${openbmc_short_name} and command value ${hostname} do not match.
+
+    # Override the suite hostname variable if this test is executed.
+    Set Suite Variable  ${bmc_hostname}  ${openbmc_short_name}
+
+
+Verify REST Logging On BMC Journal When Disabled
+    [Documentation]  Enable REST logging and verify from journald.
+    [Tags]  Verify_REST_Logging_On_BMC_Journal_When_Disabled
+
+    ${log_dict}=  Create Dictionary  data=${False}
+    Write Attribute  ${BMC_LOGGING_URI}${/}rest_api_logs  Enabled  data=${log_dict}
+    ...  verify=${True}  expected_value=${False}
+
+    # If it was enabled prior, this REST footprint will show up.
+    # Takes around 5 seconds for the REST to restart service when policy is changed.
+    Sleep  10s
+
+    ${login_footprint}=  Catenate  login json:None 200 OK
+    # Example: Just get the message part of the syslog
+    # user:root POST http://xx.xx.xx.xx/login json:None 200 OK
+    ${cmd}=  Catenate  SEPARATOR=  --no-pager | egrep '${login_footprint}'
+    ...  | awk -F': ' '{print $2}'
+
+    Start Journal Log  filter=${cmd}
+    Initialize OpenBMC
+    Sleep  5s
+    ${bmc_journald}=  Stop Journal Log
+
+    Should Be Empty  ${bmc_journald}
+    ...  msg=${bmc_journald} contains unexpected REST entries.
+
+
+Verify REST Logging On BMC Journal When Enabled
+    [Documentation]  Enable REST logging and verify from journald.
+    [Tags]  Verify_REST_Logging_On_BMC_Journal_When_Enabled
+
+    ${log_dict}=  Create Dictionary  data=${True}
+    Write Attribute  ${BMC_LOGGING_URI}${/}rest_api_logs  Enabled  data=${log_dict}
+    ...  verify=${True}  expected_value=${True}
+
+    Sleep  5s
+
+    Start Journal Log
+    Initialize OpenBMC
+    Log Out OpenBMC
+    ${bmc_journald}=  Stop Journal Log
+
+    Should Contain  ${bmc_journald}  login json:None 200 OK
+    ...  msg=${bmc_journald} doesn't contains REST entries.
+
+
+Test Remote API Valid Config Combination
+    [Documentation]  Verify  valid combination of address and port.
+    [Tags]  Test_Remote_API_Valid_Config_Combination
+    [Template]  Verify Configure Remote Logging Server
+    # Forego normal test setup:
+    [Setup]  No Operation
+
+    # Address                    Port                        Expected result
+    ${EMPTY}                     ${REMOTE_LOG_SERVER_PORT}   ${True}
+    ${REMOTE_LOG_SERVER_HOST}    ${REMOTE_LOG_SERVER_PORT}   ${True}
+    ${REMOTE_LOG_SERVER_HOST}    ${0}                        ${True}
+
+
+Test Remote API Invalid Config Combination
+    [Documentation]  Verify invalid combination of address and port.
+    [Tags]  Test_Remote_API_Invalid_Config_Combination
+    [Template]  Verify Configure Remote Logging Server
+    # Forego normal test setup:
+    [Setup]  No Operation
+
+    # Address                    Port                        Expected result
+    ${0}                         ${REMOTE_LOG_SERVER_PORT}   ${False}
+    "0"                          ${REMOTE_LOG_SERVER_PORT}   ${False}
+    ${REMOTE_LOG_SERVER_HOST}    ${EMPTY}                    ${False}
+    ${REMOTE_LOG_SERVER_HOST}    "0"                         ${False}
+
+
+Test Remote Logging REST Interface And Verify Config
+    [Documentation]  Test remote logging interface and configuration.
+    [Tags]  Test_Remote_Logging_REST_Interface_And_Verify_Config
+
+    Verify Rsyslog Config On BMC
+
+
+Test Remote Logging Invalid Port Config And Verify BMC Journald
+    [Documentation]  Test remote logging interface and configuration.
+    [Tags]  Test_Remote_Logging_Invalid_Port_Config_And_Verify_BMC_Journald
+
+    # Invalid port derived by (REMOTE_LOG_SERVER_PORT + 1) port config setting.
+    ${INVALID_PORT}=  Evaluate  ${REMOTE_LOG_SERVER_PORT} + ${1}
+    Configure Remote Log Server With Parameters
+    ...  remote_host=${REMOTE_LOG_SERVER_HOST}  remote_port=${INVALID_PORT}
+
+    Sleep  3s
+    # rsyslogd[1870]: action 'action 0' suspended,
+    # next retry is Fri Sep 14 05:47:39 2018 [v8.29.0 try http://www.rsyslog.com/e/2007 ]
+    ${bmc_journald}  ${stderr}  ${rc}=  BMC Execute Command
+    ...  journalctl -b --no-pager | egrep 'rsyslog.*${RSYSLOG_RETRY_REGEX}'
+
+    Should Contain  ${bmc_journald}  ${RSYSLOG_RETRY_REGEX}
+    ...  msg=${bmc_journald} doesn't contain rsyslog retry entries.
+
+
+Verfiy BMC Journald Synced To Remote Logging Server
+    [Documentation]  Check that BMC journald is sync to remote rsyslog.
+    [Tags]  Verfiy_BMC_Journald_Synced_To_Remote_Logging_Server
+
+    # Restart BMC dump service and get the last entry of the journald.
+    # Example:
+    # systemd[1]: Started Phosphor Dump Manager.
+    BMC Execute Command
+    ...  systemctl restart xyz.openbmc_project.Dump.Manager.service
+
+    ${bmc_journald}  ${stderr}  ${rc}=  BMC Execute Command
+    ...  journalctl --no-pager | grep 'Started Phosphor Dump Manager'
+
+    # systemd[1]: Started Phosphor Dump Manager.
+    ${cmd}=  Catenate  SEPARATOR=  egrep '${bmc_hostname}.*Started Phosphor Dump Manager' /var/log/syslog
+    ${remote_journald}=  Remote Logging Server Execute Command  command=${cmd}
+
+    # TODO: rsyslog configuration and time date template to match BMC journald.
+    # Compare the BMC journlad log. Example:
+    # systemd[1]: Started Phosphor Dump Manager.
+    Should Contain  ${remote_journald}  ${bmc_journald.split('${bmc_hostname}')[1][0]}
+    ...  msg= ${bmc_journald} doesn't match remote rsyslog:${remote_journald}.
+
+
+Verify Journald Post BMC Reset
+    [Documentation]  Check that BMC journald is sync'ed to remote rsyslog after
+    ...              BMC reset.
+    [Tags]  Verify_Journald_Post_BMC_Reset
+
+    ${hostname}  ${stderr}  ${rc}=  BMC Execute Command  hostname
+    OBMC Reboot (off)
+
+    ${cmd}=  Catenate  grep ${hostname} /var/log/syslog |
+    ...  egrep '${BMC_STOP_MSG}|${BMC_START_MSG}|${BMC_BOOT_MSG}'
+    ${remote_journald}=  Remote Logging Server Execute Command  command=${cmd}
+
+    # 1. Last reboot message to verify.
+    Should Contain  ${remote_journald}  ${BMC_STOP_MSG}
+    ...  msg=The remote journald doesn't contain the IPMI shutdown message: ${BMC_STOP_MSG}.
+
+    # 2. Earliest booting message on journald.
+    Should Contain  ${remote_journald}  ${BMC_START_MSG}
+    ...  msg=The remote journald doesn't contain the start message: ${BMC_START_MSG}.
+
+    # 3. Unique boot to standby message.
+    # Startup finished in 9.961s (kernel) + 1min 59.039s (userspace) = 2min 9.000s
+    ${bmc_journald}  ${stderr}  ${rc}=  BMC Execute Command
+    ...  journalctl -b --no-pager | egrep '${BMC_BOOT_MSG}'
+
+    Should Contain  ${remote_journald}
+    ...  ${bmc_journald.split('${hostname}')[1]}
+    ...  msg=The remote journald doesn't contain the boot message: ${BMC_BOOT_MSG}.
+
+
+Verify BMC Journald Contains No Credential Data
+    [Documentation]  Check that BMC journald doesn't log any credential data.
+    [Tags]  Verify_BMC_Journald_Contains_No_Credential_Data
+
+    Initialize OpenBMC
+
+    Create Redfish And IPMI Users
+
+    # Time for user manager to sync.
+    Sleep  5 s
+
+    Open Connection And Log In
+    ${bmc_journald}  ${stderr}  ${rc}=  BMC Execute Command
+    ...  journalctl -o json-pretty | cat
+
+    Should Not Contain Any  ${bmc_journald}  ${OPENBMC_PASSWORD}  ${REST_PASSWORD}
+    ...  msg=Journald logs BMC credentials/password ${OPENBMC_PASSWORD}.
+
+
+Audit BMC SSH Login And Remote Logging
+    [Documentation]  Check that the SSH login to BMC is logged and synced to
+    ...              remote logging server.
+    [Tags]  Audit_BMC_SSH_Login_And_Remote_Logging
+
+    ${login_footprint}=  Catenate  Started SSH Per-Connection Server
+    # Example: Just get the message part of the syslog
+    # Started SSH Per-Connection Server (xx.xx.xx.xx:51292)
+    ${cmd}=  Catenate  SEPARATOR=  --no-pager | egrep '${login_footprint}'
+    ...  | awk -F': ' '{print $2}'
+
+    Start Journal Log  filter=${cmd}
+    Open Connection And Log In
+    Sleep  5s
+    ${bmc_journald}=  Stop Journal Log
+    @{ssh_entry}=  Split To Lines  ${bmc_journald}
+
+    ${cmd}=  Catenate  SEPARATOR=  egrep -E '*${bmc_hostname}.*${login_footprint}' /var/log/syslog
+
+    ${remote_journald}=  Remote Logging Server Execute Command  command=${cmd}
+
+    Should Contain  ${remote_journald}  ${ssh_entry[0]}
+    ...  msg=${remote_journald} don't contain ${bmc_journald} entry.
+
+
+Verify Rsyslog Does Not Log On BMC
+    [Documentation]  Check that rsyslog journald doesn't log on BMC.
+    [Tags]  Verify_Rsyslog_Does_Not_Log_On_BMC
+
+    # Expected filter rsyslog entries.
+    # Example:
+    # syslogd[3356]:
+    #   [origin software="rsyslogd" swVersion="8.29.0" x-pid="3356" x-info="http://www.rsyslog.com"]
+    #     exiting on signal 15.
+    # rsyslogd[3364]:
+    # [origin software="rsyslogd" swVersion="8.29.0" x-pid="3364" x-info="http://www.rsyslog.com"] start
+    ${bmc_journald}  ${stderr}  ${rc}=  BMC Execute Command
+    ...  journalctl -b --no-pager | egrep 'rsyslog' | egrep -Ev '${RSYSLOG_REGEX}|${RSYSLOG_RETRY_REGEX}'
+    ...  ignore_err=${1}
+
+    Should Be Empty  ${bmc_journald}
+    ...  msg=${bmc_journald} contains unexpected rsyslog entries.
+
+
+Boot Host And Verify Data Is Synced To Remote Server
+    [Documentation]  Boot host and verify the power on sequence logs are synced
+    ...              to remote logging server.
+    [Tags]  Boot_Host_And_Verify_Data_Is_Synced_To_Remote_Server
+
+    # Filter kernel dmesg from the journald log.
+    # Example: xx.xx.xx kernel:
+
+    ${openbmc_host_name}  ${openbmc_ip}  ${openbmc_short_name}=
+    ...  Get Host Name IP  host=${OPENBMC_HOST}  short_name=1
+
+    ${cmd}=  Catenate  SEPARATOR=  --no-pager | egrep -Ev '${BMC_SYSLOG_REGEX}
+    ...  |${openbmc_short_name} kernel' | awk -F': ' '{print $2}'
+
+    # Example: Just get the message part of the syslog
+    # Started OpenPOWER OCC Active Disable.
+    Start Journal Log  filter=${cmd}
+
+    # Irrespective of the outcome, the journald should be synced.
+    Run Keyword And Ignore Error  Redfish Power On
+    ${bmc_journald}=  Stop Journal Log
+
+    ${cmd}=  Catenate  SEPARATOR=  egrep '${bmc_hostname}' /var/log/syslog
+    ${remote_journald}=  Remote Logging Server Execute Command  command=${cmd}
+
+    @{lines}=  Split To Lines  ${bmc_journald}
+
+    :FOR  ${line}  IN  @{lines}
+    \  Log To Console  \n ${line}
+    \  Should Contain  ${remote_journald}  ${line}
+    ...  mgs=${line} line doesn't contain in ${remote_journald}.
+
+
+*** Keywords ***
+
+Suite Setup Execution
+    [Documentation]  Do the suite setup.
+
+    Should Not Be Empty  ${REMOTE_LOG_SERVER_HOST}
+    Should Not Be Empty  ${REMOTE_LOG_SERVER_PORT}
+    Should Not Be Empty  ${REMOTE_USERNAME}
+    Should Not Be Empty  ${REMOTE_PASSWORD}
+    Ping Host  ${REMOTE_LOG_SERVER_HOST}
+    Remote Logging Server Execute Command  true
+    Remote Logging Interface Should Exist
+
+    ${hostname}  ${stderr}  ${rc}=  BMC Execute Command  /bin/hostname
+    Set Suite Variable  ${bmc_hostname}  ${hostname}
+    Configure Remote Log Server With Parameters
+
+
+Test Setup Execution
+    [Documentation]  Do the test setup.
+
+    # Retain only the past 1 second log:
+    BMC Execute Command  journalctl --vacuum-time=1s
+
+    ${config_status}=  Run Keyword And Return Status
+    ...  Get Remote Log Server Configured
+
+    Run Keyword If  ${config_status}==${FALSE}
+    ...  Configure Remote Log Server With Parameters
+
+
+Remote Logging Interface Should Exist
+    [Documentation]  Check that the remote logging URI exist.
+
+    ${resp}=  OpenBMC Get Request  ${REMOTE_LOGGING_URI}
+    Should Be Equal As Strings  ${resp.status_code}  ${HTTP_OK}
+
+
+Verify Configure Remote Logging Server
+    [Documentation]  Configure the remote logging REST interface on BMC.
+    [Arguments]  ${remote_host}  ${remote_port}  ${expectation}
+
+    # Description of argument(s):
+    # remote_host  The host name or IP address of the remote logging server
+    #              (e.g. "xx.xx.xx.xx").
+    # remote_port  Remote ryslog server port number (e.g. "514").
+    # expectation  Expect boolean True/False.
+
+
+    ${status}=  Run Keyword And Return Status
+    ...  Configure Remote Log Server With Parameters  remote_host=${remote_host}  remote_port=${remote_port}
+
+    Should Be Equal  ${status}  ${expectation}
+    ...  msg=Test result ${status} and expectation ${expectation} do not match.
+
+
+Create Redfish And IPMI Users
+    [Documentation]  Create a valid Redfish and IPMI local user accounts and
+    ...  delete them.
+
+    # Create redfish local valid user.
+    ${redfish_username}=  Generate Random String  8  [LETTERS]
+
+    Redfish.Login
+
+    ${payload}=  Create Dictionary
+    ...  UserName=${redfish_username}  Password=${valid_password}
+    ...  RoleId=Administrator  Enabled=${True}
+    Redfish.Post  /redfish/v1/AccountService/Accounts  body=&{payload}
+    ...  valid_status_codes=[${HTTP_CREATED}]
+
+    # Delete newly created user.
+    Redfish.Delete  /redfish/v1/AccountService/Accounts/${redfish_username}
+
+    Redfish.Logout
+
+    # Create IPMI local valid user.
+    ${ipmi_username}=  Generate Random String  8  [LETTERS]
+    Set Test Variable  ${ipmi_username}
+    ${random_userid}=  Evaluate  random.randint(2, 15)  modules=random
+    ${ipmi_cmd}=  Catenate  user set name ${random_userid} ${ipmi_username}
+    Run IPMI Standard Command  ${ipmi_cmd}
+
+    # Delete IPMI user.
+    Run IPMI Standard Command  user set name ${random_userid} ""
+