diff --git a/ipmi/test_ipmi_chassis.robot b/ipmi/test_ipmi_chassis.robot
index 91f6afe..880283b 100644
--- a/ipmi/test_ipmi_chassis.robot
+++ b/ipmi/test_ipmi_chassis.robot
@@ -5,10 +5,12 @@
 Resource         ../lib/openbmc_ffdc.robot
 Resource         ../lib/boot_utils.robot
 Library          ../lib/ipmi_utils.py
+Variables        ../data/ipmi_raw_cmd_table.py
 
 Suite Setup      Redfish.Login
 Suite Teardown   Redfish.Logout
-Test Teardown    FFDC On Test Case Fail
+Test Teardown    Test Teardown Execution
+
 
 *** Test Cases ***
 
@@ -58,6 +60,26 @@
     Wait Until Keyword Succeeds  3 min  10 sec  Is Host Off Via IPMI
 
 
+Verify Chassis Power Cycle And Check Chassis Status Via IPMI
+    [Documentation]   Verify chassis power Cycle operation and check the Chassis Power Status using external IPMI command.
+    [Tags]  Verify_Chassis_Power_Cycle_And_Check_Chassis_Status_Via_IPMI
+
+    # Chassis power cycle command via IPMI
+    IPMI Power Cycle
+    ${ipmi_state}=  Get Host State Via External IPMI
+    Valid Value  ipmi_state  ['on']
+
+
+Verify Chassis Power Reset And Check Chassis Status Via IPMI
+    [Documentation]   Verify chassis power Reset operation and check the Chassis Power Status using external IPMI command.
+    [Tags]  Verify_Chassis_Power_Reset_And_Check_Chassis_Status_Via_IPMI
+
+    # Chassis power reset command via IPMI
+    IPMI Power Reset
+    ${ipmi_state}=  Get Host State Via External IPMI
+    Valid Value  ipmi_state  ['on']
+
+
 Verify Chassis Power Policy
     [Documentation]  Verify setting chassis power policy via IPMI command.
     [Tags]  Verify_Chassis_Power_Policy
@@ -72,6 +94,20 @@
     previous
 
 
+Verify Chassis Status Via IPMI
+    [Documentation]  Verify Chassis Status via IPMI command.
+    [Tags]  Verify_Chassis_Status_Via_IPMI
+    [Setup]  Test Setup Execution
+    [Teardown]  Run Keywords  FFDC On Test Case Fail  AND
+    ...  Run IPMI Standard Command  chassis policy ${initial_power_policy}
+    [Template]  Check Chassis Status Via IPMI
+
+    # power_policy
+    always-off
+    always-on
+    previous
+
+
 *** Keywords ***
 
 Set Chassis Power Policy Via IPMI And Verify
@@ -86,9 +122,57 @@
     Valid Value  resp['power_restore_policy']  ['${power_policy}']
 
 
+Check Chassis Status Via IPMI
+    [Documentation]  Set Chassis Status via IPMI and verify and verify chassis status.
+    [Arguments]  ${power_policy}
+
+    # Sets power policy according to requested policy
+    Set Chassis Power Policy Via IPMI And Verify  ${power_policy}
+
+    # Gets chassis status via IPMI raw command and validate byte 1
+    ${status}=  Run External IPMI Raw Command  ${IPMI_RAW_CMD['Chassis_status']['get'][0]}
+    ${status}=  Split String  ${status}
+    ${state}=  Convert To Binary  ${status[0]}  base=16
+    ${state}=  Zfill Data  ${state}  8
+
+    # Last bit corresponds whether Power is on
+    Should Be Equal As Strings  ${state[-1]}  1
+    # bit 1-2 corresponds to power restore policy
+    ${policy}=  Set Variable  ${state[1:3]}
+
+    # condition to verify each power policy
+    IF  '${power_policy}' == 'always-off'
+        Should Be Equal As Strings  ${policy}  00
+    ELSE IF  '${power_policy}' == 'always-on'
+        Should Be Equal As Strings  ${policy}  10
+    ELSE IF  '${power_policy}' == 'previous'
+        Should Be Equal As Strings  ${policy}  01
+    ELSE
+        Log  Power Restore Policy is Unknown
+        Should Be Equal As Strings  ${policy}  11
+    END
+
+    # Last Power Event - 4th bit should be 1b i.e, last ‘Power is on’ state was entered via IPMI command
+    ${last_power_event}=  Convert To Binary  ${status[1]}  base=16
+    ${last_power_event}=  Zfill Data  ${last_power_event}  8
+    Should Be Equal As Strings  ${last_power_event[3]}  1
+
+
 Test Setup Execution
     [Documentation]  Do test setup tasks.
 
     ${chassis_status}=  Get Chassis Status
     Set Test Variable  ${initial_power_policy}  ${chassis_status['power_restore_policy']}
 
+
+Test Teardown Execution
+    [Documentation]  Do Test Teardown tasks.
+
+    ${resp}=  Run IPMI Standard Command  chassis status
+    ${power_status}=  Get Lines Containing String  ${resp}  System Power
+    @{powertolist}=  Split String  ${power_status}   :
+    ${status}=  Get From List  ${powertolist}  1
+    # Chassis Power ON if status is off
+    Run Keyword If    '${status.strip()}' != 'on'
+    ...  Redfish Power On
+    FFDC On Test Case Fail