blob: 2e438a037d5e757c82b7070f0d75c945c0c0587a [file] [log] [blame]
chithrag782ad282022-03-12 10:12:40 +00001*** Settings ***
2Documentation Test IPMI Inband SDR commands.
3... Following IPMI command are verified,
4... 1. Get SDR,
5... 2. Get Device SDR Info,
6... 3. Reserve Device SDR Repository,
7... 4. Get Device SDR.
8
9Resource ../lib/ipmi_client.robot
10Resource ../lib/openbmc_ffdc.robot
11Resource ../lib/boot_utils.robot
12Library ../lib/ipmi_utils.py
13Variables ../data/ipmi_raw_cmd_table.py
14
George Keishinge42cd022022-05-06 08:16:57 -050015Suite setup Suite Setup Execution
chithrag782ad282022-03-12 10:12:40 +000016Suite Teardown Redfish.Logout
17Test Teardown FFDC On Test Case Fail
18
George Keishing42c84ea2023-09-07 20:31:45 +053019Force Tags Ipmi_Inband_Sdr
chithrag782ad282022-03-12 10:12:40 +000020
21
22*** Test Cases ***
23
24Verify Get SDR For Maximum Record Via IPMI
25 [Documentation] Verify Get SDR for each and every record one by one via IPMI lanplus.
26 [Tags] Verify_Get_SDR_For_Maximum_Record_Via_IPMI
27
28 # Gets the Total Record Count from SDR Info and the last Record entry number.
29 ${record_count} ${last_record}= Get Record Count And Last Record From SDR
30
31 # Validate each and every record till the last record.
32 FOR ${record} IN RANGE 0 ${record_count}
33 # Convert number to hexadecimal record ID.
34 ${recordhex}= Convert To Hex ${record} length=2 lowercase=yes
35
36 # Get SDR command.
37 ${resp}= Run IPMI Standard Command
38 ... raw ${IPMI_RAW_CMD['Get SDR']['Get'][1]} 0x00 0x00 0x${recordhex} 0x00 0x00 0xff
39 ${get_SDR}= Split String ${resp}
40
41 # If the record ID reaches the last data available, the next record ID will be ff ff.
42 # eg, If total record ID available is 115, record IDs : 0 - 114,
43 # Then when record ID reaches last record ID (i.e 114 (decimal) - 72h),
44 # Get SDR response bytes 0:2 will be - ff ff 72 00 ....
45 # If not then (say 25 - 19h ), 1a 00 19 00 ....
46
47 IF '${record}' != '${last_record}'
48 # current record ID in response data.
49 Should Be Equal ${get_SDR[2]} ${recordhex}
50 Should Be Equal ${get_SDR[3]} 00
51
52 # Next record ID in response data.
53 ${record_next}= Evaluate ${record} + 1
54 ${record_next}= Convert To Hex ${record_next} length=2 lowercase=yes
55 Should Be Equal ${get_SDR[0]} ${record_next}
56 Should Be Equal ${get_SDR[1]} 00
57 ELSE
58 # Next record ID in response data.
59 Should Be Equal ${get_SDR[0]} ff
60 Should Be Equal ${get_SDR[1]} ff
61
62 # current record ID in response data.
63 Should Be Equal ${get_SDR[2]} ${recordhex}
64 Should Be Equal ${get_SDR[3]} 00
65 END
66
67 # Response Data Count - total records (max - FFh - 255 in decimal).
68 ${response_data}= Set Variable ${get_SDR[2:]}
69 ${length}= Get Length ${response_data}
70 Should Be True 0<${length}<=255
71 END
72
73
74Verify Sensor And SDR Count In Get Device SDR Info Via Inband IPMI
75 [Documentation] Verify Sensor and SDR Count in Get Device SDR Info via inband IPMI.
76 [Tags] Verify_Sensor_And_SDR_Count_In_Get_Device_SDR_Info_Via_Inband_IPMI
77
78 # Get Sensor count and SDR elist all count from IPMI LAN interface.
79 ${sensor_count_lan1} ${SDR_count_lan1}= Get Count for Sensor And SDR Elist All
80
81 # Get Sensor Count From Get Device SDR Info command.
82 ${sensor_count1}= Get Sensor Count From SDR Info
83 # Compare Get Device SDR Sensor count with Sensor count from lanplus.
84 Should Be Equal As Integers ${sensor_count1} ${sensor_count_lan1}
85
86 # Get SDR Count From Get Device SDR Info command.
87 ${SDR_count1}= Get SDR Count From SDR Info
88 # Compare Get Device SDR Sdr count with SDR Elist All count from lanplus.
89 Should Be Equal As Integers ${SDR_count1} ${SDR_count_lan1}
90
91 # Reboot Host using Chassis Power Cycle.
92 IPMI Power Cycle
93
94 # Get Sensor count and SDR elist all count from IPMI lanplus interface.
95 ${sensor_count_lan2} ${SDR_count_lan2}= Get Count for Sensor And SDR Elist All
96
97 # Get Sensor Count From Get Device SDR Info command.
98 ${sensor_count2}= Get Sensor Count From SDR Info
99 # Compare Get Device SDR Sensor count with Sensor count from lanplus.
100 Should Be Equal As Integers ${sensor_count2} ${sensor_count_lan2}
101
102 # Get SDR Count From Get Device SDR Info command.
103 ${SDR_count2}= Get SDR Count From SDR Info
104 # Compare Get Device SDR Sdr count with SDR Elist All count from lanplus.
105 Should Be Equal As Integers ${SDR_count2} ${SDR_count_lan2}
106
107
108Verify Timestamp In Get Device SDR Info Via Inband IPMI
109 [Documentation] Verify timestamp In Get Device SDR Info via inband IPMI.
110 [Tags] Verify_Timestamp_In_Get_Device_SDR_Info_Via_Inband_IPMI
111
112 # Reboot Host using Chassis Power Cycle.
113 IPMI Power Cycle
114
115 # Get epoch Timestamp obtained from Get Device SDR Info command.
116 ${SDR_timestamp}= Get Device SDR Timestamp
117
118 # Get current date from BMC Native Date command and convert to epoch.
119 ${bmc_date}= Get Current Date from BMC
120 ${epoch_bmc}= Convert Date ${bmc_date} epoch exclude_millis=yes date_format=%m/%d/%Y %H:%M:%S
121
122 # Compare time difference between bmc time and Get Device SDR Info timestamp.
123 # The maximum time difference should be less then 6 minute - 360 seconds.
124 ${difference}= Evaluate int(${epoch_bmc}) - int(${SDR_timestamp})
125 Should Be True ${difference}<=360
126
127
128Verify Get Device SDR Info For Invalid Data Request
129 [Documentation] Verify Get Device SDR Info via inband IPMI with extra bytes.
130 [Tags] Verify_Get_Device_SDR_Info_For_Invalid_Data_Request
131
132 # Sensor Count Via Device SDR Info with extra bytes.
133 ${resp}= Run Keyword and Expect Error *${IPMI_RAW_CMD['Device_SDR']['Get_Info'][3]}*
134 ... Run Inband IPMI Standard Command
135 ... raw ${IPMI_RAW_CMD['Device_SDR']['Get_Info'][0]} 0x00
136 # Proper error code should be returned.
137 Should Contain ${resp} ${IPMI_RAW_CMD['Device_SDR']['Get_Info'][2]}
138
139 # SDR Count Via Device SDR Info with extra bytes.
140 ${resp}= Run Keyword and Expect Error *${IPMI_RAW_CMD['Device_SDR']['Get_Info'][3]}*
141 ... Run Inband IPMI Standard Command
142 ... raw ${IPMI_RAW_CMD['Device_SDR']['Get_Info'][1]} 0x00
143 # Proper error code should be returned.
144 Should Contain ${resp} ${IPMI_RAW_CMD['Device_SDR']['Get_Info'][2]}
145
146
147Verify Device SDR Info Via IPMI Lanplus
148 [Documentation] Verify whether Get Device SDR Info command is accessible via lanplus.
149 [Tags] Verify_Device_SDR_Info_Via_IPMI_Lanplus
150
151 # Sensor Count Via Device SDR Info via lanplus.
152 ${resp}= Run Keyword and Expect Error *${IPMI_RAW_CMD['Device_SDR']['Get_Info'][5]}*
153 ... Run IPMI Standard Command
154 ... raw ${IPMI_RAW_CMD['Device_SDR']['Get_Info'][0]}
155 # Proper error code should be returned.
156 Should Contain ${resp} ${IPMI_RAW_CMD['Device_SDR']['Get_Info'][4]}
157
158 # SDR Count Via Device SDR Info via lanplus.
159 ${resp}= Run Keyword and Expect Error *${IPMI_RAW_CMD['Device_SDR']['Get_Info'][5]}*
160 ... Run IPMI Standard Command
161 ... raw ${IPMI_RAW_CMD['Device_SDR']['Get_Info'][1]}
162 # Proper error code should be returned.
163 Should Contain ${resp} ${IPMI_RAW_CMD['Device_SDR']['Get_Info'][4]}
164
165
166Verify Reserve Device SDR Repository Via Inband IPMI
167 [Documentation] Verify Reserve Device SDR Repository via inband IPMI.
168 [Tags] Verify_Reserve_Device_SDR_Repository_Via_Inband_IPMI
169
170 # Reserve Device SDR Repository via inband IPMI.
171 ${resp}= Get Reserve Device SDR Repository
172 ${reserve_id}= Split String ${resp}
173
174 # Identify the byte count.
175 ${length}= Get Length ${reserve_id}
176 Should Be Equal As Integers ${length} 2
177
178
179Verify Reserve Device SDR Repository For Invalid Data Request
180 [Documentation] Verify Reserve Device SDR Repository via inband IPMI with extra request bytes.
181 [Tags] Verify_Reserve_Device_SDR_Repository_For_Invalid_Data_Request
182
183 # Reserve Device SDR Repository with extra request bytes.
184 ${resp}= Run Keyword and Expect Error *${IPMI_RAW_CMD['Device_SDR']['Reserve_Repository'][2]}*
185 ... Run Inband IPMI Standard Command
186 ... raw ${IPMI_RAW_CMD['Device_SDR']['Reserve_Repository'][0]} 0x00
187 # Proper error code should be returned.
188 Should Contain ${resp} ${IPMI_RAW_CMD['Device_SDR']['Reserve_Repository'][1]}
189
190
191Verify Reserve Device SDR Repository Info Via IPMI Lanplus
192 [Documentation] Verify whether Reserve Device SDR Repository command is accessible via lanplus.
George Keishinge45d2622022-05-05 07:27:30 -0500193 [Tags] Verify_Reserve_Device_SDR_Repository_Info_Via_IPMI_Lanplus
chithrag782ad282022-03-12 10:12:40 +0000194
195 # Reserve Device SDR Repository via lanplus.
196 ${resp}= Run Keyword and Expect Error *${IPMI_RAW_CMD['Device_SDR']['Reserve_Repository'][4]}*
197 ... Run IPMI Standard Command
198 ... raw ${IPMI_RAW_CMD['Device_SDR']['Reserve_Repository'][0]}
199 # Proper error code should be returned.
200 Should Contain ${resp} ${IPMI_RAW_CMD['Device_SDR']['Reserve_Repository'][3]}
201
202
203Verify Reserve Device SDR Repository For Partial Record
George Keishing6e641262022-05-05 10:46:22 -0500204 [Documentation] Verify whether reservation ID of Reserve Device SDR Repository is accessible
205 ... to fetch partial record from Get Device SDR.
chithrag782ad282022-03-12 10:12:40 +0000206 [Tags] Verify_Reserve_Device_SDR_Repository_For_Partial_Record
207
208 # Get Reservation ID.
209 ${resp}= Get Reserve Device SDR Repository
210 ${reserve_id}= Split String ${resp}
211
212 # Check whether the response for Get device SDR command is obtained with the given Reservation ID.
nagarjunb220c701402022-05-10 14:53:06 +0530213 ${resp}= Run Inband IPMI Standard Command
nagarjunb220f1d87e2022-07-12 21:09:25 +0530214 ... raw ${IPMI_RAW_CMD['Device_SDR']['Get'][0]} 0x${reserve_id[0]} 0x${reserve_id[1]} 0x00 0x00 0x01 0x0f
chithrag782ad282022-03-12 10:12:40 +0000215 ${resp}= Split String ${resp}
216 # Record data starts from ${resp[2]}.
217 ${resp}= Set Variable ${resp[2:]}
218 ${length}= Get Length ${resp}
219 Should Be Equal As Integers ${length} 15
220
221
222Verify Reserve Device SDR Repository For Partial Record After BMC Reboot
223 [Documentation] Verify whether Reservation ID of Reserve Device SDR Repository,
224 ... is accessible after bmc reboot to fetch partial record from Get Device SDR.
225 [Tags] Verify_Reserve_Device_SDR_Repository_For_Partial_Record_After_BMC_Reboot
226
227 # Generate Reservation ID.
228 ${resp}= Get Reserve Device SDR Repository
229 ${reserve_id}= Split String ${resp}
230
231 # Check whether the response for Get device SDR command is obtained with the given Reservation ID.
nagarjunb220c701402022-05-10 14:53:06 +0530232 ${resp1}= Run Inband IPMI Standard Command
nagarjunb220f1d87e2022-07-12 21:09:25 +0530233 ... raw ${IPMI_RAW_CMD['Device_SDR']['Get'][0]} 0x${reserve_id[0]} 0x${reserve_id[1]} 0x00 0x00 0x01 0x0f
chithrag782ad282022-03-12 10:12:40 +0000234
235 # Reboot bmc.
nagarjunb220c701402022-05-10 14:53:06 +0530236 IPMI MC Reset Cold (run)
chithrag782ad282022-03-12 10:12:40 +0000237
238 # Check whether the response for Get device SDR command is obtained with the given Reservation ID.
239 # Reserve IDs are volatile so once bmc is rebooted, new Reserve ID should be generated.
240 ${resp2}= Run Keyword and Expect Error *${IPMI_RAW_CMD['Device_SDR']['Reserve_Repository'][5]}*
nagarjunb220c701402022-05-10 14:53:06 +0530241 ... Run Inband IPMI Standard Command
nagarjunb220f1d87e2022-07-12 21:09:25 +0530242 ... raw ${IPMI_RAW_CMD['Device_SDR']['Get'][0]} 0x${reserve_id[0]} 0x${reserve_id[1]} 0x00 0x00 0x01 0x0f
chithrag782ad282022-03-12 10:12:40 +0000243
244
245Verify Reserve Device SDR Repository Invalid Reservation ID For Partial Record
246 [Documentation] Verify whether invalid reservation ID of Reserve Device SDR Repository,
247 ... is accessible to fetch partial record from Get Device SDR.
248 [Tags] Verify_Reserve_Device_SDR_Repository_Invalid_Reservation_ID_For_Partial_Record
249
250 # Generate Reservation ID 1.
251 ${resp}= Get Reserve Device SDR Repository
252 ${reserve_id}= Split String ${resp}
253
254 # Generate Reservation ID 2.
255 ${resp2}= Get Reserve Device SDR Repository
256
257 # Check whether response for Gner device SDR command is obtained with Reservation ID 1.
258 # Once Reservation ID is overwritten, old Reservation ID will be invalid.
259 ${resp1}= Run Keyword and Expect Error *${IPMI_RAW_CMD['Device_SDR']['Reserve_Repository'][5]}*
nagarjunb220c701402022-05-10 14:53:06 +0530260 ... Run Inband IPMI Standard Command
nagarjunb220f1d87e2022-07-12 21:09:25 +0530261 ... raw ${IPMI_RAW_CMD['Device_SDR']['Get'][0]} 0x${reserve_id[0]} 0x${reserve_id[1]} 0x00 0x00 0x01 0x0f
chithrag782ad282022-03-12 10:12:40 +0000262
263
264Verify Get Device SDR For Maximum Record Via IPMI
nagarjunb220c701402022-05-10 14:53:06 +0530265 [Documentation] Verify Get Device SDR for each and every Record Via IPMI Inband.
chithrag782ad282022-03-12 10:12:40 +0000266 [Tags] Verify_Get_Device_SDR_For_Maximum_Record_Via_IPMI
267
268 # Gets the Total Record Count from SDR Info and the last Record entry number.
269 ${record_count} ${last_record}= Get Record Count And Last Record From SDR
270
271 # Validate each and every record till the last record.
272 FOR ${record} IN RANGE 0 ${record_count}
273 # Convert number to hexadecimal record ID.
274 ${recordhex}= Convert To Hex ${record} length=2 lowercase=yes
275
nagarjunb220c701402022-05-10 14:53:06 +0530276 # Get Device SDR command.
277 ${resp}= Run Inband IPMI Standard Command
chithrag782ad282022-03-12 10:12:40 +0000278 ... raw ${IPMI_RAW_CMD['Device_SDR']['Get'][0]} 0x00 0x00 0x${recordhex} 0x00 0x00 0xff
279 ${get_dev_SDR}= Split String ${resp}
280
281 # If the record ID reaches the last data available, the next record ID will be ff ff
282 # eg, If total record ID available is 115, record IDs : 0 - 114,
283 # Then when record ID reaches last record ID (i.e 114 (in decimal) - 72h),
284 # Get SDR response bytes 0:2 will be - ff ff 72 00 ....
285 # If not then (say 25 - 19h ), 1a 00 19 00 ....
286
287 IF '${record}' != '${last_record}'
288 # current record ID in response data.
289 Should Be Equal ${get_dev_SDR[2]} ${recordhex}
290 Should Be Equal ${get_dev_SDR[3]} 00
291
292 # Next record ID in response data.
293 ${record_next}= Evaluate ${record} + 1
294 ${record_next}= Convert To Hex ${record_next} length=2 lowercase=yes
295 Should Be Equal ${get_dev_SDR[0]} ${record_next}
296 Should Be Equal ${get_dev_SDR[1]} 00
297
298 ELSE
299 # Next record ID in response data.
300 Should Be Equal ${get_dev_SDR[0]} ff
301 Should Be Equal ${get_dev_SDR[1]} ff
302
303 # current record ID in response data.
304 Should Be Equal ${get_dev_SDR[2]} ${recordhex}
305 Should Be Equal ${get_dev_SDR[3]} 00
306
307 END
308 # Response data count - total record ID (max - FFh - 255 in decimal).
309 ${response_data}= Set Variable ${get_dev_SDR[2:]}
310 ${length}= Get Length ${response_data}
311 Should Be True 0<${length}<=255
312 END
313
314
315Verify Get Device SDR For Invalid Data Request Via IPMI
316 [Documentation] Verify Get Device SDR via IPMI lanplus with extra bytes.
317 [Tags] Verify_Get_Device_SDR_For_Invalid_Data_Request_Via_IPMI
318
319 # Get SDR command with extra bytes.
320 ${resp}= Run Keyword and Expect Error *${IPMI_RAW_CMD['Device_SDR']['Get'][3]}*
nagarjunb220c701402022-05-10 14:53:06 +0530321 ... Run Inband IPMI Standard Command
chithrag782ad282022-03-12 10:12:40 +0000322 ... raw ${IPMI_RAW_CMD['Device_SDR']['Get'][0]} 0x00 0x00 ${IPMI_RAW_CMD['Device_SDR']['Get'][1]} 0x00
323 # Proper error code should be returned.
324 Should Contain ${resp} ${IPMI_RAW_CMD['Device_SDR']['Get'][2]}
325
326
327*** Keywords ***
328
329Get IPMI Sensor Count
330 [Documentation] Get sensors count using "SDR elist all" command.
331 # Example of "SDR elist all" command output:
332 # BootProgress | 03h | ok | 34.2 |
333 # OperatingSystemS | 05h | ok | 35.1 |
334 # AttemptsLeft | 07h | ok | 34.1 |
335 # occ0 | 08h | ok | 210.1 | Device Disabled
336 # occ1 | 09h | ok | 210.2 | Device Disabled
337 # p0_core0_temp | 11h | ns | 3.1 | Disabled
338 # cpu0_core0 | 12h | ok | 208.1 | Presence detected
339 # p0_core1_temp | 14h | ns | 3.2 | Disabled
340 # cpu0_core1 | 15h | ok | 208.2 | Presence detected
341 # p0_core2_temp | 17h | ns | 3.3 | Disabled
342 # ..
343 # ..
344 # ..
345 # ..
346 # ..
347 # ..
348 # fan3 | 00h | ns | 29.4 | Logical FRU @35h
349 # bmc | 00h | ns | 6.1 | Logical FRU @3Ch
350 # ethernet | 00h | ns | 1.1 | Logical FRU @46h
351
nagarjunb220c701402022-05-10 14:53:06 +0530352 ${output}= Run IPMI Standard Command sdr elist all
chithrag782ad282022-03-12 10:12:40 +0000353 ${sensor_list}= Split String ${output} \n
354 ${sensor_count}= Get Length ${sensor_list}
355 [Return] ${sensor_count}
356
357
358Get Device SDR Info For Sensor Data
359 [Documentation] Get Device SDR Info via inband IPMI and return response data with Sensor count.
360
361 # Get Device SDR Info for Sensor data.
362 ${sensor_data}= Run Inband IPMI Standard Command
363 ... raw ${IPMI_RAW_CMD['Device_SDR']['Get_Info'][0]}
364
365 [Return] ${sensor_data}
366
367
368Get Device SDR Info For SDR Data
369 [Documentation] Get Device SDR Info via inband IPMI and return response data with SDR count.
370
371 # Get Device SDR Info for SDR data.
372 ${SDR_data}= Run Inband IPMI Standard Command
373 ... raw ${IPMI_RAW_CMD['Device_SDR']['Get_Info'][1]}
374
375 [Return] ${SDR_data}
376
377
378Get Sensor Count From SDR Info
379 [Documentation] Get Sensor Count from Get Device SDR Info data.
380
381 # Get Device SDR Info Via inband IPMI for Sensor count.
382 ${sensor_data}= Get Device SDR Info For Sensor Data
383
384 # Get Sensor count from Get Device SDR Info count - bytie 0.
385 ${sensor_data}= Split String ${sensor_data}
386 ${sensor_count}= Set Variable ${sensor_data[0]}
387 ${sensor_count}= Convert To Integer ${sensor_count} 16
388
389 [Return] ${sensor_count}
390
391
392Get SDR Count From SDR Info
393 [Documentation] Get SDR Count from Get Device SDR Info data.
394
395 # Get Device SDR Info Via inband IPMI for SDR count.
396 ${SDR_data}= Get Device SDR Info For SDR Data
397
398 # Get SDR count from Get Device SDR Info count - byte 0.
399 ${SDR_data}= Split String ${SDR_data}
400 ${SDR_count}= Set Variable ${SDR_data[0]}
401 ${SDR_count}= Convert To Integer ${SDR_count} 16
402
403 [Return] ${SDR_count}
404
405
406Get Device SDR Timestamp
407 [Documentation] Get Timestamp from Get Device SDR Info.
408
409 # Get Device SDR Info Via inband IPMI for Sendor count.
410 ${sensor_data}= Get Device SDR Info For Sensor Data
411 # Get Device SDR Info Via inband IPMI for SDR count.
412 ${SDR_data}= Get Device SDR Info For SDR Data
413
414 # Split into list.
415 ${sensor_data}= Split String ${sensor_data}
416 ${SDR_data}= Split String ${SDR_data}
417
418 # Timestamp for the Get SDR count will be from Response byte 2 to N.
419 # Compare the timestamps for Sensor data and SDR data.
420 Should Be Equal ${sensor_data[2:]} ${SDR_data[2:]}
421
422 # Convert Bytestamp to Epoch timestamp.
423 ${timestamp}= Set Variable ${SDR_data[2:]}
424 Reverse List ${timestamp}
425 ${timestamp}= Evaluate "".join(${timestamp})
426 # Prefixes 0s for expected bytes.
427 ${timestamp}= Zfill Data ${timestamp} 8
428 ${timestamp}= Convert To Integer ${timestamp} 16
429
430 [Return] ${timestamp}
431
432
433Get Count for Sensor And SDR Elist All
434 [Documentation] Get Sensor and SDR elist all count via IPMI lanplus.
435
436 # Get Sensor list via IPMI lanplus.
437 ${sensor_count}= Run IPMI Standard Command sensor | wc -l
438 # Get SDR elist all via IPMI lanplus.
439 ${SDR_count}= Get IPMI Sensor Count
440
441 [Return] ${sensor_count} ${SDR_count}
442
443
444Get Reserve Device SDR Repository
445 [Documentation] Get Reserve Device SDR Repository via Inband IPMI.
446
447 # Reserve Device SDR Repository command via inband.
448 ${resp}= Run Inband IPMI Standard Command
449 ... raw ${IPMI_RAW_CMD['Device_SDR']['Reserve_Repository'][0]}
450
451 [Return] ${resp}
452
453
454Get IPMI SDR Status Info
455 [Documentation] Returns status for given IPMI SDR Info.
456 [Arguments] ${setting}
457 # Description of argument(s):
458 # setting SDR Info which needs to be read(e.g. "SDR Version").
459 # SDR Version : 0x51
460 # Record Count : 58
461 # Free Space : 9312 bytes
462 # Most recent Addition : 03/10/2022 05:56:02
463 # Most recent Erase : 02/07/2106 06:28:15
464 # SDR overflow : yes
465 # SDR Repository Update Support : unspecified
466 # Delete SDR supported : no
467 # Partial Add SDR supported : no
468 # Reserve SDR repository supported : yes
469 # SDR Repository Alloc info supported : yes
470
471 # Get SDR Info IPMI command.
nagarjunb220c701402022-05-10 14:53:06 +0530472 ${resp}= Run IPMI Standard Command sdr info
chithrag782ad282022-03-12 10:12:40 +0000473
474 # Return lines for given IPMI SDR Info.
475 ${setting_line}= Get Lines Containing String ${resp} ${setting}
476 ... case-insensitive
477 ${setting_status}= Fetch From Right ${setting_line} :${SPACE}
478
479 [Return] ${setting_status}
480
481
482Get Record Count And Last Record From SDR
483 [Documentation] Returns total record count from IPMI SDR Info and last SDR record.
484
485 # Returns Record count from IPMI SDR Info.
486 ${record_count}= Get IPMI SDR Status Info Record Count
487
488 # Identifies Last record ID.
489 # If Record Count = 58 (3Ah), record IDs range from 0 to 57.
490 # Then Last record ID will be 57 (in decimal) - 39h.
491 ${last_record}= Evaluate ${record_count} - 1
492
493 [Return] ${record_count} ${last_record}
George Keishinge42cd022022-05-06 08:16:57 -0500494
495
496Suite Setup Execution
497 [Documentation] Do suite setup tasks.
George Keishinge42cd022022-05-06 08:16:57 -0500498 Redfish.Login
499 Should Not Be Empty ${OS_HOST} msg=Please provide required parameter OS_HOST
500 Should Not Be Empty ${OS_USERNAME} msg=Please provide required parameter OS_USERNAME
George Keishing42c84ea2023-09-07 20:31:45 +0530501 Should Not Be Empty ${OS_PASSWORD} msg=Please provide required parameter OS_PASSWORD