blob: 21c63bf65c55280f89412808d0cdd2c82319341f [file] [log] [blame]
Prashanth Kattic8bfc362019-09-03 07:40:43 -05001*** Settings ***
2Documentation Network stack stress tests using "nping" tool.
3
shrsuman123c1a260c2022-02-01 03:38:56 -06004# This Suite has few testcases which uses nping with ICMP.
5# ICMP creates a raw socket, which requires root privilege/sudo to run tests.
6
Prashanth Kattic8bfc362019-09-03 07:40:43 -05007Resource ../lib/resource.robot
Prashanth Katti2f80bf12021-06-17 07:43:25 -05008Resource ../lib/bmc_redfish_resource.robot
9Resource ../lib/ipmi_client.robot
Prashanth Katti1da88262022-02-21 05:09:45 -060010Resource ../lib/bmc_network_security_utils.robot
George Keishing369a0dc2023-04-05 10:27:42 +053011Resource ../lib/protocol_setting_utils.robot
Prashanth Kattic8bfc362019-09-03 07:40:43 -050012
13Library OperatingSystem
14Library String
15Library ../lib/gen_robot_valid.py
16Library ../lib/bmc_network_utils.py
Prashanth Katti2f80bf12021-06-17 07:43:25 -050017Library ../lib/ipmi_utils.py
Prashanth Kattic8bfc362019-09-03 07:40:43 -050018
19Suite Setup Suite Setup Execution
20
21Force Tags Network_Nping
22
23*** Variables ***
24
25${delay} 1000ms
26${count} 4
27${program_name} nping
Prashanth Katti2f80bf12021-06-17 07:43:25 -050028${iterations} 5000
Prashanth Kattic8bfc362019-09-03 07:40:43 -050029
30*** Test Cases ***
31
32Send ICMP Timestamp Request
33 [Documentation] Send ICMP packet type 13 and check BMC drops such packets
34 [Tags] Send_ICMP_Timestamp_Request
35
36 # Send ICMP packet type 13 to BMC and check packet loss.
37 ${packet_loss}= Send Network Packets And Get Packet Loss
38 ... ${OPENBMC_HOST} ${count} ${ICMP_PACKETS} ${NETWORK_PORT} ${ICMP_TIMESTAMP_REQUEST}
39 Should Be Equal As Numbers ${packet_loss} 100.00
40 ... msg=FAILURE: BMC is not dropping timestamp request messages.
41
42Send ICMP Netmask Request
43 [Documentation] Send ICMP packet type 17 and check BMC drops such packets
44 [Tags] Send_ICMP_Netmask_Request
45
46 # Send ICMP packet type 17 to BMC and check packet loss.
47 ${packet_loss}= Send Network Packets And Get Packet Loss
48 ... ${OPENBMC_HOST} ${count} ${ICMP_PACKETS} ${NETWORK_PORT} ${ICMP_NETMASK_REQUEST}
49 Should Be Equal As Numbers ${packet_loss} 100.00
50 ... msg=FAILURE: BMC is not dropping netmask request messages.
51
shrsuman123c1a260c2022-02-01 03:38:56 -060052Send Continuous ICMP Echo Request To BMC And Verify No Packet Loss
53 [Documentation] Send ICMP packet type 8 continuously and check no packets are dropped from BMC
54 [Tags] Send_Continuous_ICMP_Echo_Request_To_BMC_And_Verify_No_Packet_Loss
55
56 # Send ICMP packet type 8 to BMC and check packet loss.
57 ${packet_loss}= Send Network Packets And Get Packet Loss
58 ... ${OPENBMC_HOST} ${iterations} ${ICMP_PACKETS}
59 Should Be Equal As Numbers ${packet_loss} 0.0
60 ... msg=FAILURE: BMC is dropping packets.
61
Prashanth Kattic8bfc362019-09-03 07:40:43 -050062Send Network Packets Continuously To Redfish Interface
63 [Documentation] Send network packets continuously to Redfish interface and verify stability.
64 [Tags] Send_Network_Packets_Continuously_To_Redfish_Interface
65
66 # Send large number of packets to Redfish interface.
67 ${packet_loss}= Send Network Packets And Get Packet Loss
Prashanth Katti2f80bf12021-06-17 07:43:25 -050068 ... ${OPENBMC_HOST} ${iterations} ${TCP_PACKETS} ${REDFISH_INTERFACE}
Prashanth Kattib18762b2021-06-21 07:55:52 -050069 Should Be Equal As Numbers ${packet_loss} 0.0
Prashanth Kattic8bfc362019-09-03 07:40:43 -050070 ... msg=FAILURE: BMC is dropping some packets.
71
Priya Sinha25163b82023-02-24 05:35:22 -060072 # Check if Redfish bmcweb server response is functional.
Prashanth Kattic8bfc362019-09-03 07:40:43 -050073 Redfish.Login
74 Redfish.Logout
75
Prashanth Katti2f80bf12021-06-17 07:43:25 -050076
77Send Network Packets Continuously To IPMI Port
78 [Documentation] Send network packets continuously to IPMI port and verify stability.
79 [Tags] Send_Network_Packets_Continuously_To_IPMI_Port
80
81 # Send large number of packets to IPMI port.
82 ${packet_loss}= Send Network Packets And Get Packet Loss
83 ... ${OPENBMC_HOST} ${iterations} ${TCP_PACKETS} ${IPMI_PORT}
Prashanth Kattib18762b2021-06-21 07:55:52 -050084 Should Be Equal As Numbers ${packet_loss} 0.0
Prashanth Katti2f80bf12021-06-17 07:43:25 -050085 ... msg=FAILURE: BMC is dropping some packets.
86
87 # Check if IPMI interface is functional.
88 Run IPMI Standard Command chassis status
89
90
91Send Network Packets Continuously To SSH Port
92 [Documentation] Send network packets continuously to SSH port and verify stability.
93 [Tags] Send_Network_Packets_Continuously_To_SSH_Port
94
95 # Send large number of packets to SSH port.
96 ${packet_loss}= Send Network Packets And Get Packet Loss
97 ... ${OPENBMC_HOST} ${iterations} ${TCP_PACKETS} ${SSH_PORT}
Prashanth Kattib18762b2021-06-21 07:55:52 -050098 Should Be Equal As Numbers ${packet_loss} 0.0
Prashanth Katti2f80bf12021-06-17 07:43:25 -050099 ... msg=FAILURE: BMC is dropping some packets.
100
101 # Check if SSH interface is functional.
102
103 SSHLibrary.Open Connection ${OPENBMC_HOST}
104 Open Connection And Log In ${OPENBMC_USERNAME} ${OPENBMC_PASSWORD}
105
106
Prashanth Kattib18762b2021-06-21 07:55:52 -0500107Flood Redfish Interface With Packets With Flags And Check Stability
108 [Documentation] Send large number of packets with flags to Redfish interface
109 ... and check stability.
110 [Tags] Flood_Redfish_Interface_With_Packets_With_Flags_And_Check_Stability
111 [Template] Send Network Packets With Flags And Verify Stability
112
113 # Target No. Of packets Interface Flags
114
115 # Flood syn packets and check BMC behavior.
116 ${OPENBMC_HOST} ${iterations} ${REDFISH_INTERFACE} ${SYN_PACKETS}
117
118 # Flood reset packets and check BMC behavior.
119 ${OPENBMC_HOST} ${iterations} ${REDFISH_INTERFACE} ${RESET_PACKETS}
120
121 # Flood fin packets and check BMC behavior.
122 ${OPENBMC_HOST} ${iterations} ${REDFISH_INTERFACE} ${FIN_PACKETS}
123
124 # Flood syn ack reset packets and check BMC behavior.
125 ${OPENBMC_HOST} ${iterations} ${REDFISH_INTERFACE} ${SYN_ACK_RESET}
126
127 # Flood packets with all flags and check BMC behavior.
128 ${OPENBMC_HOST} ${iterations} ${REDFISH_INTERFACE} ${ALL_FLAGS}
129
130
Megha G N1c87ae52023-02-16 00:08:42 -0600131Send Network Packets Continuously To SOL Port
132 [Documentation] Send network packets continuously to SOL port and verify stability.
133 [Tags] Send_Network_Packets_Continuously_To_SOL_Port
134 [Teardown] Run Keywords FFDC On Test Case Fail AND Close all connections
135
136 # Send large number of packets to SOL port.
137 ${packet_loss}= Send Network Packets And Get Packet Loss
138 ... ${OPENBMC_HOST} ${iterations} ${TCP_PACKETS} ${HOST_SOL_PORT}
139
140 # Check if SOL interface is functional.
141
142 SSHLibrary.Open Connection ${OPENBMC_HOST} port=${HOST_SOL_PORT}
143 Verify Interface Stability ${HOST_SOL_PORT}
144 Should Be Equal As Numbers ${packet_loss} 0.0
145 ... msg=FAILURE: BMC is dropping some packets.
146
147
Priya Sinha25163b82023-02-24 05:35:22 -0600148Send Continuous TCP Connection Requests To Redfish Interface And Check Stability
149 [Documentation] Establish large number of TCP connections to Redfish port (443)
150 ... and check check network responses stability.
151 [Tags] Send_Continuous_TCP_Connection_Requests_To_Redfish_Interface_And_Check_Stability
152
153 # Establish large number of TCP connections to Redfish interface.
154 ${connection_loss}= Establish TCP Connections And Get Connection Failures
155 ... ${OPENBMC_HOST} ${iterations} ${TCP_CONNECTION} ${HTTPS_PORT}
156
157 # Check if Redfish interface is functional.
158 Redfish.Login
159 Redfish.Logout
160
161 # Check if TCP connections dropped.
162 Should Be Equal As Numbers ${connection_loss} 0.0
163 ... msg=FAILURE: BMC is dropping some connections.
164
165
166Send Continuous TCP Connection Requests To IPMI Interface And Check Stability
167 [Documentation] Establish large number of TCP connections to IPMI interface
168 ... and check stability.
169 [Tags] Send_Continuous_TCP_Connection_Requests_To_IPMI_Interface_And_Check_Stability
170
171 # Establish large number of TCP connections to IPMI interface.
172 ${connection_loss}= Establish TCP Connections And Get Connection Failures
173 ... ${OPENBMC_HOST} ${iterations} ${TCP_CONNECTION} ${IPMI_PORT}
174
175 # Check if IPMI interface is functional.
George Keishing369a0dc2023-04-05 10:27:42 +0530176 Verify IPMI Works lan print
Priya Sinha25163b82023-02-24 05:35:22 -0600177
178 # Check if TCP/Network connections dropped.
179 Should Be Equal As Numbers ${connection_loss} 0.0
180 ... msg=FAILURE: BMC is dropping connections
181
Megha G N5e22deb2023-03-08 01:23:56 -0600182
183Send Continuous TCP Connection Requests To SSH Interface And Check Stability
184 [Documentation] Establish large number of TCP connections to SSH interface
185 ... and check stability.
186 [Tags] Send_Continuous_TCP_Connection_Requests_To_SSH_Interface_And_Check_Stability
187
188 # Establish large number of TCP connections to SSH interface.
189 ${connection_loss}= Establish TCP Connections And Get Connection Failures
190 ... ${OPENBMC_HOST} ${iterations} ${TCP_CONNECTION} ${SSH_PORT}
191
192 # Check if SSH interface is functional.
193 Verify Interface Stability ${SSH_PORT}
194
195 # Check if TCP/Network connections dropped.
196 Should Be Equal As Numbers ${connection_loss} 0.0
197 ... msg=FAILURE: BMC is dropping connections
198
199
Prashanth Kattic8bfc362019-09-03 07:40:43 -0500200*** Keywords ***
201
202Suite Setup Execution
203 [Documentation] Validate the setup.
204
205 Valid Value OPENBMC_HOST
206 Valid Program program_name
207
Prashanth Kattib18762b2021-06-21 07:55:52 -0500208
209Verify Interface Stability
210 [Documentation] Verify interface is up and active.
211 [Arguments] ${port}
212
213 # Description of argument(s):
214 # port Network port.
215
216 Run Keyword If ${port} == ${REDFISH_INTERFACE}
217 ... Redfish.Login
218 ... ELSE IF ${port} == ${SSH_PORT}
219 ... Open Connection And Log In ${OPENBMC_USERNAME} ${OPENBMC_PASSWORD}
220 ... ELSE IF ${port} == ${IPMI_PORT}
George Keishing6e6d7852022-05-13 03:04:18 -0500221 ... Run External IPMI Standard Command lan print
Prashanth Kattib18762b2021-06-21 07:55:52 -0500222 ... ELSE IF ${port} == ${HOST_SOL_PORT}
223 ... Open Connection And Log In ${OPENBMC_USERNAME} ${OPENBMC_PASSWORD} port=${HOST_SOL_PORT}
224 ... ELSE
225 ... Redfish.Login
Priya Sinha25163b82023-02-24 05:35:22 -0600226
227Establish TCP Connections And Get Connection Failures
228 [Documentation] Establish TCP connections and return nping connection responses.
229 [Arguments] ${target_host} ${num}=${count} ${packet_type}=${TCP_CONNECTION}
230 ... http_port=${80}
231
232 # Description of argument(s):
233 # host The host name or IP address of the target system.
234 # packet_type The type of packets to be sent ("tcp", "udp", "icmp").
235 # http_port Network port.
236 # num Number of connections to be sent.
237
238 # This keyword expects host, port, type and number of connections to be sent
239 # and rate at which connectionss to be sent, should be given in command line.
240 # By default it sends 4 TCP connections at 1 connection/second.
241
242 ${cmd_buf}= Set Variable --delay ${delay} ${host} -c ${num} --${packet_type} -p ${port}
243 ${nping_result}= Nping ${cmd_buf}
244 [Return] ${nping_result['percent_failed']}