diff --git a/poky/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0001-Install-wpa_passphrase-when-not-disabled.patch b/poky/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0001-Install-wpa_passphrase-when-not-disabled.patch
new file mode 100644
index 0000000..c04c608
--- /dev/null
+++ b/poky/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0001-Install-wpa_passphrase-when-not-disabled.patch
@@ -0,0 +1,33 @@
+From 57b12a1e43605f71239a21488cb9b541f0751dda Mon Sep 17 00:00:00 2001
+From: Alex Kiernan <alexk@zuma.ai>
+Date: Thu, 21 Apr 2022 10:15:29 +0100
+Subject: [PATCH] Install wpa_passphrase when not disabled
+
+As part of fixing CONFIG_NO_WPA_PASSPHRASE, whilst wpa_passphrase gets
+built, its not installed during `make install`.
+
+Fixes: cb41c214b78d ("build: Re-enable options for libwpa_client.so and wpa_passphrase")
+Signed-off-by: Alex Kiernan <alexk@zuma.ai>
+Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
+Upstream-Status: Submitted [http://lists.infradead.org/pipermail/hostap/2022-April/040448.html]
+---
+ wpa_supplicant/Makefile | 3 +++
+ 1 file changed, 3 insertions(+)
+
+diff --git a/wpa_supplicant/Makefile b/wpa_supplicant/Makefile
+index 0bab313f2355..12787c0c7d0f 100644
+--- a/wpa_supplicant/Makefile
++++ b/wpa_supplicant/Makefile
+@@ -73,6 +73,9 @@ $(DESTDIR)$(BINDIR)/%: %
+ 
+ install: $(addprefix $(DESTDIR)$(BINDIR)/,$(BINALL))
+ 	$(MAKE) -C ../src install
++ifndef CONFIG_NO_WPA_PASSPHRASE
++	install -D wpa_passphrase $(DESTDIR)/$(BINDIR)/wpa_passphrase
++endif
+ ifdef CONFIG_BUILD_WPA_CLIENT_SO
+ 	install -m 0644 -D libwpa_client.so $(DESTDIR)/$(LIBDIR)/libwpa_client.so
+ 	install -m 0644 -D ../src/common/wpa_ctrl.h $(DESTDIR)/$(INCDIR)/wpa_ctrl.h
+-- 
+2.35.1
+
diff --git a/poky/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0001-build-Re-enable-options-for-libwpa_client.so-and-wpa.patch b/poky/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0001-build-Re-enable-options-for-libwpa_client.so-and-wpa.patch
new file mode 100644
index 0000000..6e930fc
--- /dev/null
+++ b/poky/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0001-build-Re-enable-options-for-libwpa_client.so-and-wpa.patch
@@ -0,0 +1,73 @@
+From cb41c214b78d6df187a31950342e48a403dbd769 Mon Sep 17 00:00:00 2001
+From: Sergey Matyukevich <geomatsi@gmail.com>
+Date: Tue, 22 Feb 2022 11:52:19 +0300
+Subject: [PATCH 1/2] build: Re-enable options for libwpa_client.so and
+ wpa_passphrase
+
+Commit a41a29192e5d ("build: Pull common fragments into a build.rules
+file") introduced a regression into wpa_supplicant build process. The
+build target libwpa_client.so is not built regardless of whether the
+option CONFIG_BUILD_WPA_CLIENT_SO is set or not. This happens because
+this config option is used before it is imported from the configuration
+file. Moving its use after including build.rules does not help: the
+variable ALL is processed by build.rules and further changes are not
+applied. Similarly, option CONFIG_NO_WPA_PASSPHRASE also does not work
+as expected: wpa_passphrase is always built regardless of whether the
+option is set or not.
+
+Re-enable these options by adding both build targets to _all
+dependencies.
+
+Fixes: a41a29192e5d ("build: Pull common fragments into a build.rules file")
+Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
+Upstream-Status: Backport
+Signed-off-by: Alex Kiernan <alexk@zuma.ai>
+Signed-off-by: Alex Kiernan <alexk@gmail.com>
+---
+ wpa_supplicant/Makefile | 19 ++++++++++++-------
+ 1 file changed, 12 insertions(+), 7 deletions(-)
+
+diff --git a/wpa_supplicant/Makefile b/wpa_supplicant/Makefile
+index cb66defac7c8..c456825ae75f 100644
+--- a/wpa_supplicant/Makefile
++++ b/wpa_supplicant/Makefile
+@@ -1,24 +1,29 @@
+ BINALL=wpa_supplicant wpa_cli
+ 
+-ifndef CONFIG_NO_WPA_PASSPHRASE
+-BINALL += wpa_passphrase
+-endif
+-
+ ALL = $(BINALL)
+ ALL += systemd/wpa_supplicant.service
+ ALL += systemd/wpa_supplicant@.service
+ ALL += systemd/wpa_supplicant-nl80211@.service
+ ALL += systemd/wpa_supplicant-wired@.service
+ ALL += dbus/fi.w1.wpa_supplicant1.service
+-ifdef CONFIG_BUILD_WPA_CLIENT_SO
+-ALL += libwpa_client.so
+-endif
+ 
+ EXTRA_TARGETS=dynamic_eap_methods
+ 
+ CONFIG_FILE=.config
+ include ../src/build.rules
+ 
++ifdef CONFIG_BUILD_WPA_CLIENT_SO
++# add the dependency this way to allow CONFIG_BUILD_WPA_CLIENT_SO
++# being set in the config which is read by build.rules
++_all: libwpa_client.so
++endif
++
++ifndef CONFIG_NO_WPA_PASSPHRASE
++# add the dependency this way to allow CONFIG_NO_WPA_PASSPHRASE
++# being set in the config which is read by build.rules
++_all: wpa_passphrase
++endif
++
+ ifdef LIBS
+ # If LIBS is set with some global build system defaults, clone those for
+ # LIBS_c and LIBS_p to cover wpa_passphrase and wpa_cli as well.
+-- 
+2.35.1
+
diff --git a/poky/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0002-Fix-removal-of-wpa_passphrase-on-make-clean.patch b/poky/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0002-Fix-removal-of-wpa_passphrase-on-make-clean.patch
new file mode 100644
index 0000000..53b0fcd
--- /dev/null
+++ b/poky/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0002-Fix-removal-of-wpa_passphrase-on-make-clean.patch
@@ -0,0 +1,26 @@
+From d001b301ba7987f4b39453a211631b85c48f2ff8 Mon Sep 17 00:00:00 2001
+From: Jouni Malinen <quic_jouni@quicinc.com>
+Date: Thu, 3 Mar 2022 13:26:42 +0200
+Subject: [PATCH 2/2] Fix removal of wpa_passphrase on 'make clean'
+
+Fixes: 0430bc8267b4 ("build: Add a common-clean target")
+Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
+Upstream-Status: Backport
+Signed-off-by: Alex Kiernan <alexk@zuma.ai>
+Signed-off-by: Alex Kiernan <alexk@gmail.com>
+---
+ wpa_supplicant/Makefile | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/wpa_supplicant/Makefile b/wpa_supplicant/Makefile
+index c456825ae75f..4b4688931b1d 100644
+--- a/wpa_supplicant/Makefile
++++ b/wpa_supplicant/Makefile
+@@ -2077,3 +2077,4 @@ clean: common-clean
+ 	rm -f libwpa_client.a
+ 	rm -f libwpa_client.so
+ 	rm -f libwpa_test1 libwpa_test2
++	rm -f wpa_passphrase
+-- 
+2.35.1
+
diff --git a/poky/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/defconfig b/poky/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/defconfig
deleted file mode 100644
index f04e398..0000000
--- a/poky/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/defconfig
+++ /dev/null
@@ -1,552 +0,0 @@
-# Example wpa_supplicant build time configuration
-#
-# This file lists the configuration options that are used when building the
-# hostapd binary. All lines starting with # are ignored. Configuration option
-# lines must be commented out complete, if they are not to be included, i.e.,
-# just setting VARIABLE=n is not disabling that variable.
-#
-# This file is included in Makefile, so variables like CFLAGS and LIBS can also
-# be modified from here. In most cases, these lines should use += in order not
-# to override previous values of the variables.
-
-
-# Uncomment following two lines and fix the paths if you have installed OpenSSL
-# or GnuTLS in non-default location
-#CFLAGS += -I/usr/local/openssl/include
-#LIBS += -L/usr/local/openssl/lib
-
-# Some Red Hat versions seem to include kerberos header files from OpenSSL, but
-# the kerberos files are not in the default include path. Following line can be
-# used to fix build issues on such systems (krb5.h not found).
-#CFLAGS += -I/usr/include/kerberos
-
-# Example configuration for various cross-compilation platforms
-
-#### sveasoft (e.g., for Linksys WRT54G) ######################################
-#CC=mipsel-uclibc-gcc
-#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
-#CFLAGS += -Os
-#CPPFLAGS += -I../src/include -I../../src/router/openssl/include
-#LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl
-###############################################################################
-
-#### openwrt (e.g., for Linksys WRT54G) #######################################
-#CC=mipsel-uclibc-gcc
-#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
-#CFLAGS += -Os
-#CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \
-#	-I../WRT54GS/release/src/include
-#LIBS = -lssl
-###############################################################################
-
-
-# Driver interface for Host AP driver
-CONFIG_DRIVER_HOSTAP=y
-
-# Driver interface for Agere driver
-#CONFIG_DRIVER_HERMES=y
-# Change include directories to match with the local setup
-#CFLAGS += -I../../hcf -I../../include -I../../include/hcf
-#CFLAGS += -I../../include/wireless
-
-# Driver interface for madwifi driver
-# Deprecated; use CONFIG_DRIVER_WEXT=y instead.
-#CONFIG_DRIVER_MADWIFI=y
-# Set include directory to the madwifi source tree
-#CFLAGS += -I../../madwifi
-
-# Driver interface for ndiswrapper
-# Deprecated; use CONFIG_DRIVER_WEXT=y instead.
-#CONFIG_DRIVER_NDISWRAPPER=y
-
-# Driver interface for Atmel driver
-# CONFIG_DRIVER_ATMEL=y
-
-# Driver interface for old Broadcom driver
-# Please note that the newer Broadcom driver ("hybrid Linux driver") supports
-# Linux wireless extensions and does not need (or even work) with the old
-# driver wrapper. Use CONFIG_DRIVER_WEXT=y with that driver.
-#CONFIG_DRIVER_BROADCOM=y
-# Example path for wlioctl.h; change to match your configuration
-#CFLAGS += -I/opt/WRT54GS/release/src/include
-
-# Driver interface for Intel ipw2100/2200 driver
-# Deprecated; use CONFIG_DRIVER_WEXT=y instead.
-#CONFIG_DRIVER_IPW=y
-
-# Driver interface for Ralink driver
-#CONFIG_DRIVER_RALINK=y
-
-# Driver interface for generic Linux wireless extensions
-# Note: WEXT is deprecated in the current Linux kernel version and no new
-# functionality is added to it. nl80211-based interface is the new
-# replacement for WEXT and its use allows wpa_supplicant to properly control
-# the driver to improve existing functionality like roaming and to support new
-# functionality.
-CONFIG_DRIVER_WEXT=y
-
-# Driver interface for Linux drivers using the nl80211 kernel interface
-CONFIG_DRIVER_NL80211=y
-
-# driver_nl80211.c requires libnl. If you are compiling it yourself
-# you may need to point hostapd to your version of libnl.
-#
-#CFLAGS += -I$<path to libnl include files>
-#LIBS += -L$<path to libnl library files>
-
-# Use libnl v2.0 (or 3.0) libraries.
-#CONFIG_LIBNL20=y
-
-# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored)
-CONFIG_LIBNL32=y
-
-
-# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
-#CONFIG_DRIVER_BSD=y
-#CFLAGS += -I/usr/local/include
-#LIBS += -L/usr/local/lib
-#LIBS_p += -L/usr/local/lib
-#LIBS_c += -L/usr/local/lib
-
-# Driver interface for Windows NDIS
-#CONFIG_DRIVER_NDIS=y
-#CFLAGS += -I/usr/include/w32api/ddk
-#LIBS += -L/usr/local/lib
-# For native build using mingw
-#CONFIG_NATIVE_WINDOWS=y
-# Additional directories for cross-compilation on Linux host for mingw target
-#CFLAGS += -I/opt/mingw/mingw32/include/ddk
-#LIBS += -L/opt/mingw/mingw32/lib
-#CC=mingw32-gcc
-# By default, driver_ndis uses WinPcap for low-level operations. This can be
-# replaced with the following option which replaces WinPcap calls with NDISUIO.
-# However, this requires that WZC is disabled (net stop wzcsvc) before starting
-# wpa_supplicant.
-# CONFIG_USE_NDISUIO=y
-
-# Driver interface for development testing
-#CONFIG_DRIVER_TEST=y
-
-# Driver interface for wired Ethernet drivers
-CONFIG_DRIVER_WIRED=y
-
-# Driver interface for the Broadcom RoboSwitch family
-#CONFIG_DRIVER_ROBOSWITCH=y
-
-# Driver interface for no driver (e.g., WPS ER only)
-#CONFIG_DRIVER_NONE=y
-
-# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
-# included)
-CONFIG_IEEE8021X_EAPOL=y
-
-# EAP-MD5
-CONFIG_EAP_MD5=y
-
-# EAP-MSCHAPv2
-CONFIG_EAP_MSCHAPV2=y
-
-# EAP-TLS
-CONFIG_EAP_TLS=y
-
-# EAL-PEAP
-CONFIG_EAP_PEAP=y
-
-# EAP-TTLS
-CONFIG_EAP_TTLS=y
-
-# EAP-FAST
-# Note: If OpenSSL is used as the TLS library, OpenSSL 1.0 or newer is needed
-# for EAP-FAST support. Older OpenSSL releases would need to be patched, e.g.,
-# with openssl-0.9.8x-tls-extensions.patch, to add the needed functions.
-#CONFIG_EAP_FAST=y
-
-# EAP-GTC
-CONFIG_EAP_GTC=y
-
-# EAP-OTP
-CONFIG_EAP_OTP=y
-
-# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
-#CONFIG_EAP_SIM=y
-
-# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
-#CONFIG_EAP_PSK=y
-
-# EAP-pwd (secure authentication using only a password)
-#CONFIG_EAP_PWD=y
-
-# EAP-PAX
-#CONFIG_EAP_PAX=y
-
-# LEAP
-CONFIG_EAP_LEAP=y
-
-# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
-#CONFIG_EAP_AKA=y
-
-# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used).
-# This requires CONFIG_EAP_AKA to be enabled, too.
-#CONFIG_EAP_AKA_PRIME=y
-
-# Enable USIM simulator (Milenage) for EAP-AKA
-#CONFIG_USIM_SIMULATOR=y
-
-# EAP-SAKE
-#CONFIG_EAP_SAKE=y
-
-# EAP-GPSK
-#CONFIG_EAP_GPSK=y
-# Include support for optional SHA256 cipher suite in EAP-GPSK
-#CONFIG_EAP_GPSK_SHA256=y
-
-# EAP-TNC and related Trusted Network Connect support (experimental)
-#CONFIG_EAP_TNC=y
-
-# Wi-Fi Protected Setup (WPS)
-CONFIG_WPS=y
-# Enable WSC 2.0 support
-#CONFIG_WPS2=y
-# Enable WPS external registrar functionality
-#CONFIG_WPS_ER=y
-# Disable credentials for an open network by default when acting as a WPS
-# registrar.
-#CONFIG_WPS_REG_DISABLE_OPEN=y
-# Enable WPS support with NFC config method
-#CONFIG_WPS_NFC=y
-
-# EAP-IKEv2
-#CONFIG_EAP_IKEV2=y
-
-# EAP-EKE
-#CONFIG_EAP_EKE=y
-
-# PKCS#12 (PFX) support (used to read private key and certificate file from
-# a file that usually has extension .p12 or .pfx)
-CONFIG_PKCS12=y
-
-# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
-# engine.
-CONFIG_SMARTCARD=y
-
-# PC/SC interface for smartcards (USIM, GSM SIM)
-# Enable this if EAP-SIM or EAP-AKA is included
-#CONFIG_PCSC=y
-
-# Support HT overrides (disable HT/HT40, mask MCS rates, etc.)
-#CONFIG_HT_OVERRIDES=y
-
-# Support VHT overrides (disable VHT, mask MCS rates, etc.)
-#CONFIG_VHT_OVERRIDES=y
-
-# Development testing
-#CONFIG_EAPOL_TEST=y
-
-# Select control interface backend for external programs, e.g, wpa_cli:
-# unix = UNIX domain sockets (default for Linux/*BSD)
-# udp = UDP sockets using localhost (127.0.0.1)
-# named_pipe = Windows Named Pipe (default for Windows)
-# udp-remote = UDP sockets with remote access (only for tests systems/purpose)
-# y = use default (backwards compatibility)
-# If this option is commented out, control interface is not included in the
-# build.
-CONFIG_CTRL_IFACE=y
-
-# Include support for GNU Readline and History Libraries in wpa_cli.
-# When building a wpa_cli binary for distribution, please note that these
-# libraries are licensed under GPL and as such, BSD license may not apply for
-# the resulting binary.
-#CONFIG_READLINE=y
-
-# Include internal line edit mode in wpa_cli. This can be used as a replacement
-# for GNU Readline to provide limited command line editing and history support.
-#CONFIG_WPA_CLI_EDIT=y
-
-# Remove debugging code that is printing out debug message to stdout.
-# This can be used to reduce the size of the wpa_supplicant considerably
-# if debugging code is not needed. The size reduction can be around 35%
-# (e.g., 90 kB).
-#CONFIG_NO_STDOUT_DEBUG=y
-
-# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
-# 35-50 kB in code size.
-#CONFIG_NO_WPA=y
-
-# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support
-# This option can be used to reduce code size by removing support for
-# converting ASCII passphrases into PSK. If this functionality is removed, the
-# PSK can only be configured as the 64-octet hexstring (e.g., from
-# wpa_passphrase). This saves about 0.5 kB in code size.
-#CONFIG_NO_WPA_PASSPHRASE=y
-
-# Disable scan result processing (ap_mode=1) to save code size by about 1 kB.
-# This can be used if ap_scan=1 mode is never enabled.
-#CONFIG_NO_SCAN_PROCESSING=y
-
-# Select configuration backend:
-# file = text file (e.g., wpa_supplicant.conf; note: the configuration file
-#	path is given on command line, not here; this option is just used to
-#	select the backend that allows configuration files to be used)
-# winreg = Windows registry (see win_example.reg for an example)
-CONFIG_BACKEND=file
-
-# Remove configuration write functionality (i.e., to allow the configuration
-# file to be updated based on runtime configuration changes). The runtime
-# configuration can still be changed, the changes are just not going to be
-# persistent over restarts. This option can be used to reduce code size by
-# about 3.5 kB.
-#CONFIG_NO_CONFIG_WRITE=y
-
-# Remove support for configuration blobs to reduce code size by about 1.5 kB.
-#CONFIG_NO_CONFIG_BLOBS=y
-
-# Select program entry point implementation:
-# main = UNIX/POSIX like main() function (default)
-# main_winsvc = Windows service (read parameters from registry)
-# main_none = Very basic example (development use only)
-#CONFIG_MAIN=main
-
-# Select wrapper for operatins system and C library specific functions
-# unix = UNIX/POSIX like systems (default)
-# win32 = Windows systems
-# none = Empty template
-#CONFIG_OS=unix
-
-# Select event loop implementation
-# eloop = select() loop (default)
-# eloop_win = Windows events and WaitForMultipleObject() loop
-#CONFIG_ELOOP=eloop
-
-# Should we use poll instead of select? Select is used by default.
-#CONFIG_ELOOP_POLL=y
-
-# Select layer 2 packet implementation
-# linux = Linux packet socket (default)
-# pcap = libpcap/libdnet/WinPcap
-# freebsd = FreeBSD libpcap
-# winpcap = WinPcap with receive thread
-# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y)
-# none = Empty template
-#CONFIG_L2_PACKET=linux
-
-# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
-CONFIG_PEERKEY=y
-
-# IEEE 802.11w (management frame protection), also known as PMF
-# Driver support is also needed for IEEE 802.11w.
-#CONFIG_IEEE80211W=y
-
-# Select TLS implementation
-# openssl = OpenSSL (default)
-# gnutls = GnuTLS
-# internal = Internal TLSv1 implementation (experimental)
-# none = Empty template
-#CONFIG_TLS=openssl
-
-# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
-# can be enabled to get a stronger construction of messages when block ciphers
-# are used. It should be noted that some existing TLS v1.0 -based
-# implementation may not be compatible with TLS v1.1 message (ClientHello is
-# sent prior to negotiating which version will be used)
-#CONFIG_TLSV11=y
-
-# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
-# can be enabled to enable use of stronger crypto algorithms. It should be
-# noted that some existing TLS v1.0 -based implementation may not be compatible
-# with TLS v1.2 message (ClientHello is sent prior to negotiating which version
-# will be used)
-#CONFIG_TLSV12=y
-
-# If CONFIG_TLS=internal is used, additional library and include paths are
-# needed for LibTomMath. Alternatively, an integrated, minimal version of
-# LibTomMath can be used. See beginning of libtommath.c for details on benefits
-# and drawbacks of this option.
-#CONFIG_INTERNAL_LIBTOMMATH=y
-#ifndef CONFIG_INTERNAL_LIBTOMMATH
-#LTM_PATH=/usr/src/libtommath-0.39
-#CFLAGS += -I$(LTM_PATH)
-#LIBS += -L$(LTM_PATH)
-#LIBS_p += -L$(LTM_PATH)
-#endif
-# At the cost of about 4 kB of additional binary size, the internal LibTomMath
-# can be configured to include faster routines for exptmod, sqr, and div to
-# speed up DH and RSA calculation considerably
-#CONFIG_INTERNAL_LIBTOMMATH_FAST=y
-
-# Include NDIS event processing through WMI into wpa_supplicant/wpasvc.
-# This is only for Windows builds and requires WMI-related header files and
-# WbemUuid.Lib from Platform SDK even when building with MinGW.
-#CONFIG_NDIS_EVENTS_INTEGRATED=y
-#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib"
-
-# Add support for old DBus control interface
-# (fi.epitest.hostap.WPASupplicant)
-#CONFIG_CTRL_IFACE_DBUS=y
-
-# Add support for new DBus control interface
-# (fi.w1.hostap.wpa_supplicant1)
-CONFIG_CTRL_IFACE_DBUS_NEW=y
-
-# Add introspection support for new DBus control interface
-#CONFIG_CTRL_IFACE_DBUS_INTRO=y
-
-# Add support for loading EAP methods dynamically as shared libraries.
-# When this option is enabled, each EAP method can be either included
-# statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn).
-# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to
-# be loaded in the beginning of the wpa_supplicant configuration file
-# (see load_dynamic_eap parameter in the example file) before being used in
-# the network blocks.
-#
-# Note that some shared parts of EAP methods are included in the main program
-# and in order to be able to use dynamic EAP methods using these parts, the
-# main program must have been build with the EAP method enabled (=y or =dyn).
-# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries
-# unless at least one of them was included in the main build to force inclusion
-# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included
-# in the main build to be able to load these methods dynamically.
-#
-# Please also note that using dynamic libraries will increase the total binary
-# size. Thus, it may not be the best option for targets that have limited
-# amount of memory/flash.
-#CONFIG_DYNAMIC_EAP_METHODS=y
-
-# IEEE Std 802.11r-2008 (Fast BSS Transition)
-#CONFIG_IEEE80211R=y
-
-# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
-#CONFIG_DEBUG_FILE=y
-
-# Send debug messages to syslog instead of stdout
-#CONFIG_DEBUG_SYSLOG=y
-# Set syslog facility for debug messages
-#CONFIG_DEBUG_SYSLOG_FACILITY=LOG_DAEMON
-
-# Add support for sending all debug messages (regardless of debug verbosity)
-# to the Linux kernel tracing facility. This helps debug the entire stack by
-# making it easy to record everything happening from the driver up into the
-# same file, e.g., using trace-cmd.
-#CONFIG_DEBUG_LINUX_TRACING=y
-
-# Enable privilege separation (see README 'Privilege separation' for details)
-#CONFIG_PRIVSEP=y
-
-# Enable mitigation against certain attacks against TKIP by delaying Michael
-# MIC error reports by a random amount of time between 0 and 60 seconds
-#CONFIG_DELAYED_MIC_ERROR_REPORT=y
-
-# Enable tracing code for developer debugging
-# This tracks use of memory allocations and other registrations and reports
-# incorrect use with a backtrace of call (or allocation) location.
-#CONFIG_WPA_TRACE=y
-# For BSD, uncomment these.
-#LIBS += -lexecinfo
-#LIBS_p += -lexecinfo
-#LIBS_c += -lexecinfo
-
-# Use libbfd to get more details for developer debugging
-# This enables use of libbfd to get more detailed symbols for the backtraces
-# generated by CONFIG_WPA_TRACE=y.
-#CONFIG_WPA_TRACE_BFD=y
-# For BSD, uncomment these.
-#LIBS += -lbfd -liberty -lz
-#LIBS_p += -lbfd -liberty -lz
-#LIBS_c += -lbfd -liberty -lz
-
-CONFIG_TLS = %ssl%
-CONFIG_CTRL_IFACE_DBUS=y
-CONFIG_CTRL_IFACE_DBUS_NEW=y
-
-# wpa_supplicant depends on strong random number generation being available
-# from the operating system. os_get_random() function is used to fetch random
-# data when needed, e.g., for key generation. On Linux and BSD systems, this
-# works by reading /dev/urandom. It should be noted that the OS entropy pool
-# needs to be properly initialized before wpa_supplicant is started. This is
-# important especially on embedded devices that do not have a hardware random
-# number generator and may by default start up with minimal entropy available
-# for random number generation.
-#
-# As a safety net, wpa_supplicant is by default trying to internally collect
-# additional entropy for generating random data to mix in with the data fetched
-# from the OS. This by itself is not considered to be very strong, but it may
-# help in cases where the system pool is not initialized properly. However, it
-# is very strongly recommended that the system pool is initialized with enough
-# entropy either by using hardware assisted random number generator or by
-# storing state over device reboots.
-#
-# wpa_supplicant can be configured to maintain its own entropy store over
-# restarts to enhance random number generation. This is not perfect, but it is
-# much more secure than using the same sequence of random numbers after every
-# reboot. This can be enabled with -e<entropy file> command line option. The
-# specified file needs to be readable and writable by wpa_supplicant.
-#
-# If the os_get_random() is known to provide strong random data (e.g., on
-# Linux/BSD, the board in question is known to have reliable source of random
-# data from /dev/urandom), the internal wpa_supplicant random pool can be
-# disabled. This will save some in binary size and CPU use. However, this
-# should only be considered for builds that are known to be used on devices
-# that meet the requirements described above.
-#CONFIG_NO_RANDOM_POOL=y
-
-# IEEE 802.11n (High Throughput) support (mainly for AP mode)
-#CONFIG_IEEE80211N=y
-
-# IEEE 802.11ac (Very High Throughput) support (mainly for AP mode)
-# (depends on CONFIG_IEEE80211N)
-#CONFIG_IEEE80211AC=y
-
-# Wireless Network Management (IEEE Std 802.11v-2011)
-# Note: This is experimental and not complete implementation.
-#CONFIG_WNM=y
-
-# Interworking (IEEE 802.11u)
-# This can be used to enable functionality to improve interworking with
-# external networks (GAS/ANQP to learn more about the networks and network
-# selection based on available credentials).
-#CONFIG_INTERWORKING=y
-
-# Hotspot 2.0
-#CONFIG_HS20=y
-
-# Disable roaming in wpa_supplicant
-#CONFIG_NO_ROAMING=y
-
-# AP mode operations with wpa_supplicant
-# This can be used for controlling AP mode operations with wpa_supplicant. It
-# should be noted that this is mainly aimed at simple cases like
-# WPA2-Personal while more complex configurations like WPA2-Enterprise with an
-# external RADIUS server can be supported with hostapd.
-CONFIG_AP=y
-
-CONFIG_BGSCAN_SIMPLE=y
-
-# P2P (Wi-Fi Direct)
-# This can be used to enable P2P support in wpa_supplicant. See README-P2P for
-# more information on P2P operations.
-#CONFIG_P2P=y
-
-# Enable TDLS support
-#CONFIG_TDLS=y
-
-# Wi-Fi Direct
-# This can be used to enable Wi-Fi Direct extensions for P2P using an external
-# program to control the additional information exchanges in the messages.
-#CONFIG_WIFI_DISPLAY=y
-
-# Autoscan
-# This can be used to enable automatic scan support in wpa_supplicant.
-# See wpa_supplicant.conf for more information on autoscan usage.
-#
-# Enabling directly a module will enable autoscan support.
-# For exponential module:
-CONFIG_AUTOSCAN_EXPONENTIAL=y
-# For periodic module:
-#CONFIG_AUTOSCAN_PERIODIC=y
-
-# Password (and passphrase, etc.) backend for external storage
-# These optional mechanisms can be used to add support for storing passwords
-# and other secrets in external (to wpa_supplicant) location. This allows, for
-# example, operating system specific key storage to be used
-#
-# External password backend for testing purposes (developer use)
-#CONFIG_EXT_PASSWORD_TEST=y
diff --git a/poky/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant_2.10.bb b/poky/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant_2.10.bb
index 6e80ac7..aee5657 100644
--- a/poky/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant_2.10.bb
+++ b/poky/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant_2.10.bb
@@ -1,76 +1,61 @@
 SUMMARY = "Client for Wi-Fi Protected Access (WPA)"
-HOMEPAGE = "http://w1.fi/wpa_supplicant/"
 DESCRIPTION = "wpa_supplicant is a WPA Supplicant for Linux, BSD, Mac OS X, and Windows with support for WPA and WPA2 (IEEE 802.11i / RSN). Supplicant is the IEEE 802.1X/WPA component that is used in the client stations. It implements key negotiation with a WPA Authenticator and it controls the roaming and IEEE 802.11 authentication/association of the wlan driver."
+HOMEPAGE = "http://w1.fi/wpa_supplicant/"
 BUGTRACKER = "http://w1.fi/security/"
 SECTION = "network"
 LICENSE = "BSD-3-Clause"
 LIC_FILES_CHKSUM = "file://COPYING;md5=5ebcb90236d1ad640558c3d3cd3035df \
                     file://README;beginline=1;endline=56;md5=e3d2f6c2948991e37c1ca4960de84747 \
                     file://wpa_supplicant/wpa_supplicant.c;beginline=1;endline=12;md5=76306a95306fee9a976b0ac1be70f705"
+
 DEPENDS = "dbus libnl"
-RRECOMMENDS:${PN} = "wpa-supplicant-passphrase wpa-supplicant-cli"
-
-PACKAGECONFIG ??= "openssl"
-PACKAGECONFIG[gnutls] = ",,gnutls libgcrypt"
-PACKAGECONFIG[openssl] = ",,openssl"
-
-inherit pkgconfig systemd
-
-SYSTEMD_SERVICE:${PN} = "wpa_supplicant.service"
-SYSTEMD_AUTO_ENABLE = "disable"
 
 SRC_URI = "http://w1.fi/releases/wpa_supplicant-${PV}.tar.gz \
-           file://defconfig \
            file://wpa-supplicant.sh \
            file://wpa_supplicant.conf \
            file://wpa_supplicant.conf-sane \
            file://99_wpa_supplicant \
+           file://0001-build-Re-enable-options-for-libwpa_client.so-and-wpa.patch \
+           file://0002-Fix-removal-of-wpa_passphrase-on-make-clean.patch \
+           file://0001-Install-wpa_passphrase-when-not-disabled.patch \
            "
 SRC_URI[sha256sum] = "20df7ae5154b3830355f8ab4269123a87affdea59fe74fe9292a91d0d7e17b2f"
 
-CVE_PRODUCT = "wpa_supplicant"
-
 S = "${WORKDIR}/wpa_supplicant-${PV}"
 
-PACKAGES:prepend = "wpa-supplicant-passphrase wpa-supplicant-cli "
-FILES:wpa-supplicant-passphrase = "${bindir}/wpa_passphrase"
-FILES:wpa-supplicant-cli = "${sbindir}/wpa_cli"
-FILES:${PN} += "${datadir}/dbus-1/system-services/* ${systemd_system_unitdir}/*"
-CONFFILES:${PN} += "${sysconfdir}/wpa_supplicant.conf"
+inherit pkgconfig systemd
+
+PACKAGECONFIG ?= "openssl"
+PACKAGECONFIG[gnutls] = ",,gnutls libgcrypt"
+PACKAGECONFIG[openssl] = ",,openssl"
+
+CVE_PRODUCT = "wpa_supplicant"
+
+EXTRA_OEMAKE = "'LIBDIR=${libdir}' 'INCDIR=${includedir}' 'BINDIR=${sbindir}'"
 
 do_configure () {
 	${MAKE} -C wpa_supplicant clean
-	install -m 0755 ${WORKDIR}/defconfig wpa_supplicant/.config
+	sed -e '/CONFIG_TLS=/d' <wpa_supplicant/defconfig >wpa_supplicant/.config
 
-	if echo "${PACKAGECONFIG}" | grep -qw "openssl"; then
-        	ssl=openssl
-	elif echo "${PACKAGECONFIG}" | grep -qw "gnutls"; then
-        	ssl=gnutls
-	fi
-	if [ -n "$ssl" ]; then
-        	sed -i "s/%ssl%/$ssl/" wpa_supplicant/.config
+	if ${@ bb.utils.contains('PACKAGECONFIG', 'openssl', 'true', 'false', d) }; then
+		echo 'CONFIG_TLS=openssl' >>wpa_supplicant/.config
+	elif ${@ bb.utils.contains('PACKAGECONFIG', 'gnutls', 'true', 'false', d) }; then
+		echo 'CONFIG_TLS=gnutls' >>wpa_supplicant/.config
 	fi
 
 	# For rebuild
 	rm -f wpa_supplicant/*.d wpa_supplicant/dbus/*.d
 }
 
-export EXTRA_CFLAGS = "${CFLAGS}"
-export BINDIR = "${sbindir}"
-
 do_compile () {
-	unset CFLAGS CPPFLAGS CXXFLAGS
-	sed -e "s:CFLAGS\ =.*:& \$(EXTRA_CFLAGS):g" -i ${S}/src/lib.rules
 	oe_runmake -C wpa_supplicant
+	if [ -z "${DISABLE_STATIC}" ]; then
+		oe_runmake -C wpa_supplicant libwpa_client.a
+	fi
 }
 
 do_install () {
-	install -d ${D}${sbindir}
-	install -m 755 wpa_supplicant/wpa_supplicant ${D}${sbindir}
-	install -m 755 wpa_supplicant/wpa_cli        ${D}${sbindir}
-
-	install -d ${D}${bindir}
-	install -m 755 wpa_supplicant/wpa_passphrase ${D}${bindir}
+	oe_runmake -C wpa_supplicant DESTDIR="${D}" install
 
 	install -d ${D}${docdir}/wpa_supplicant
 	install -m 644 wpa_supplicant/README ${WORKDIR}/wpa_supplicant.conf ${D}${docdir}/wpa_supplicant
@@ -82,8 +67,7 @@
 	install -d ${D}${sysconfdir}/network/if-post-down.d/
 	install -d ${D}${sysconfdir}/network/if-down.d/
 	install -m 755 ${WORKDIR}/wpa-supplicant.sh ${D}${sysconfdir}/network/if-pre-up.d/wpa-supplicant
-	cd ${D}${sysconfdir}/network/ && \
-	ln -sf ../if-pre-up.d/wpa-supplicant if-post-down.d/wpa-supplicant
+	ln -sf ../if-pre-up.d/wpa-supplicant ${D}${sysconfdir}/network/if-post-down.d/wpa-supplicant
 
 	install -d ${D}/${sysconfdir}/dbus-1/system.d
 	install -m 644 ${S}/wpa_supplicant/dbus/dbus-wpa_supplicant.conf ${D}/${sysconfdir}/dbus-1/system.d
@@ -97,6 +81,14 @@
 
 	install -d ${D}/etc/default/volatiles
 	install -m 0644 ${WORKDIR}/99_wpa_supplicant ${D}/etc/default/volatiles
+
+	install -d ${D}${includedir}
+	install -m 0644 ${S}/src/common/wpa_ctrl.h ${D}${includedir}
+
+	if [ -z "${DISABLE_STATIC}" ]; then
+		install -d ${D}${libdir}
+		install -m 0644 wpa_supplicant/libwpa_client.a ${D}${libdir}
+	fi
 }
 
 pkg_postinst:${PN} () {
@@ -104,5 +96,39 @@
 	if [ "x$D" = "x" ]; then
 		killall -q -HUP dbus-daemon || true
 	fi
-
 }
+
+PACKAGE_BEFORE_PN += "${PN}-passphrase ${PN}-cli"
+PACKAGES =+ "${PN}-lib"
+PACKAGES += "${PN}-plugins"
+ALLOW_EMPTY:${PN}-plugins = "1"
+
+PACKAGES_DYNAMIC += "^${PN}-plugin-.*$"
+NOAUTOPACKAGEDEBUG = "1"
+
+FILES:${PN}-passphrase = "${sbindir}/wpa_passphrase"
+FILES:${PN}-cli = "${sbindir}/wpa_cli"
+FILES:${PN}-lib = "${libdir}/libwpa_client*${SOLIBSDEV}"
+FILES:${PN} += "${datadir}/dbus-1/system-services/* ${systemd_system_unitdir}/*"
+FILES:${PN}-dbg += "${sbindir}/.debug ${libdir}/.debug"
+
+CONFFILES:${PN} += "${sysconfdir}/wpa_supplicant.conf"
+
+RRECOMMENDS:${PN} = "${PN}-passphrase ${PN}-cli ${PN}-plugins"
+
+SYSTEMD_SERVICE:${PN} = "wpa_supplicant.service"
+SYSTEMD_AUTO_ENABLE = "disable"
+
+python split_wpa_supplicant_libs () {
+    libdir = d.expand('${libdir}/wpa_supplicant')
+    dbglibdir = os.path.join(libdir, '.debug')
+
+    split_packages = do_split_packages(d, libdir, r'^(.*)\.so', '${PN}-plugin-%s', 'wpa_supplicant %s plugin', prepend=True)
+    split_dbg_packages = do_split_packages(d, dbglibdir, r'^(.*)\.so', '${PN}-plugin-%s-dbg', 'wpa_supplicant %s plugin - Debugging files', prepend=True, extra_depends='${PN}-dbg')
+
+    if split_packages:
+        pn = d.getVar('PN')
+        d.setVar('RRECOMMENDS:' + pn + '-plugins', ' '.join(split_packages))
+        d.appendVar('RRECOMMENDS:' + pn + '-dbg', ' ' + ' '.join(split_dbg_packages))
+}
+PACKAGESPLITFUNCS:prepend = "split_wpa_supplicant_libs "