diff --git a/poky/documentation/bsp-guide/bsp.rst b/poky/documentation/bsp-guide/bsp.rst
index 4086202..068ab6c 100644
--- a/poky/documentation/bsp-guide/bsp.rst
+++ b/poky/documentation/bsp-guide/bsp.rst
@@ -44,7 +44,7 @@
 To help understand the BSP layer concept, consider the BSPs that the
 Yocto Project supports and provides with each release. You can see the
 layers in the
-:ref:`overview-manual/overview-manual-development-environment:yocto project source repositories`
+:ref:`overview-manual/development-environment:yocto project source repositories`
 through
 a web interface at :yocto_git:`/`. If you go to that interface,
 you will find a list of repositories under "Yocto Metadata Layers".
@@ -72,7 +72,7 @@
 section. For more
 information on how to set up a local copy of source files from a Git
 repository, see the
-:ref:`dev-manual/dev-manual-start:locating yocto project source files`
+:ref:`dev-manual/start:locating yocto project source files`
 section in the Yocto Project Development Tasks Manual.
 
 The BSP layer's base directory (``meta-bsp_root_name``) is the root
@@ -81,7 +81,7 @@
 ``conf/bblayers.conf`` file found in your
 :term:`Build Directory`, which is
 established after you run the OpenEmbedded build environment setup
-script (i.e. :ref:`ref-manual/ref-structure:\`\`oe-init-build-env\`\``).
+script (i.e. :ref:`ref-manual/structure:\`\`oe-init-build-env\`\``).
 Adding the root directory allows the :term:`OpenEmbedded Build System`
 to recognize the BSP
 layer and from it build an image. Here is an example: ::
@@ -128,7 +128,7 @@
 and so on.
 
 For more information on layers, see the
-":ref:`dev-manual/dev-manual-common-tasks:understanding and creating layers`"
+":ref:`dev-manual/common-tasks:understanding and creating layers`"
 section of the Yocto Project Development Tasks Manual.
 
 Preparing Your Build Host to Work With BSP Layers
@@ -146,7 +146,7 @@
    :ref:`bsp-guide/bsp:example filesystem layout` section.
 
 #. *Set Up the Build Environment:* Be sure you are set up to use BitBake
-   in a shell. See the ":ref:`dev-manual/dev-manual-start:preparing the build host`"
+   in a shell. See the ":ref:`dev-manual/start:preparing the build host`"
    section in the Yocto Project Development Tasks Manual for information on how
    to get a build host ready that is either a native Linux machine or a machine
    that uses CROPS.
@@ -154,10 +154,10 @@
 #. *Clone the poky Repository:* You need to have a local copy of the
    Yocto Project :term:`Source Directory` (i.e. a local
    ``poky`` repository). See the
-   ":ref:`dev-manual/dev-manual-start:cloning the \`\`poky\`\` repository`" and
+   ":ref:`dev-manual/start:cloning the \`\`poky\`\` repository`" and
    possibly the
-   ":ref:`dev-manual/dev-manual-start:checking out by branch in poky`" or
-   ":ref:`dev-manual/dev-manual-start:checking out by tag in poky`"
+   ":ref:`dev-manual/start:checking out by branch in poky`" or
+   ":ref:`dev-manual/start:checking out by tag in poky`"
    sections
    all in the Yocto Project Development Tasks Manual for information on
    how to clone the ``poky`` repository and check out the appropriate
@@ -172,8 +172,7 @@
 #. *Optionally Clone the meta-intel BSP Layer:* If your hardware is
    based on current Intel CPUs and devices, you can leverage this BSP
    layer. For details on the ``meta-intel`` BSP layer, see the layer's
-   `README <http://git.yoctoproject.org/cgit/cgit.cgi/meta-intel/tree/README>`__
-   file.
+   :yocto_git:`README </meta-intel/tree/README>` file.
 
    #. *Navigate to Your Source Directory:* Typically, you set up the
       ``meta-intel`` Git repository inside the :term:`Source Directory` (e.g.
@@ -206,7 +205,7 @@
 
          To see the available branch names in a cloned repository, use the ``git
          branch -al`` command. See the
-         ":ref:`dev-manual/dev-manual-start:checking out by branch in poky`"
+         ":ref:`dev-manual/start:checking out by branch in poky`"
          section in the Yocto Project Development Tasks Manual for more
          information.
 
@@ -230,7 +229,7 @@
 
 #. *Initialize the Build Environment:* While in the root directory of
    the Source Directory (i.e. ``poky``), run the
-   :ref:`ref-manual/ref-structure:\`\`oe-init-build-env\`\`` environment
+   :ref:`ref-manual/structure:\`\`oe-init-build-env\`\`` environment
    setup script to define the OpenEmbedded build environment on your
    build host. ::
 
@@ -254,7 +253,7 @@
 OpenEmbedded build system. It is also intended that it will be be simple
 to extract information and convert it to other formats if required. The
 OpenEmbedded build system, through its standard :ref:`layers mechanism
-<overview-manual/overview-manual-yp-intro:the yocto project layer model>`, can
+<overview-manual/yp-intro:the yocto project layer model>`, can
 directly accept the format described as a layer. The BSP layer captures
 all the hardware-specific details in one place using a standard format,
 which is useful for any person wishing to use the hardware platform
@@ -464,7 +463,7 @@
 Licensing files can be MIT, BSD, GPLv*, and so forth. These files are
 recommended for the BSP but are optional and totally up to the BSP
 developer. For information on how to maintain license compliance, see
-the ":ref:`dev-manual/dev-manual-common-tasks:maintaining open source license compliance during your product's lifecycle`"
+the ":ref:`dev-manual/common-tasks:maintaining open source license compliance during your product's lifecycle`"
 section in the Yocto Project Development Tasks Manual.
 
 README File
@@ -590,7 +589,7 @@
 
 These files define things such as the kernel package to use
 (:term:`PREFERRED_PROVIDER` of
-:ref:`virtual/kernel <dev-manual/dev-manual-common-tasks:using virtual providers>`),
+:ref:`virtual/kernel <dev-manual/common-tasks:using virtual providers>`),
 the hardware drivers to include in different types of images, any
 special software components that are needed, any bootloader information,
 and also any special image format requirements.
@@ -694,7 +693,7 @@
 particular BSP.
 
 You can find more information on what your append file should contain in
-the ":ref:`kernel-dev/kernel-dev-common:creating the append file`" section
+the ":ref:`kernel-dev/common:creating the append file`" section
 in the Yocto Project Linux Kernel Development Manual.
 
 An alternate scenario is when you create your own kernel recipe for the
@@ -727,7 +726,7 @@
    :align: center
 
 #. *Set up Your Host Development System to Support Development Using the
-   Yocto Project*: See the ":ref:`dev-manual/dev-manual-start:preparing the build host`"
+   Yocto Project*: See the ":ref:`dev-manual/start:preparing the build host`"
    section in the Yocto Project Development Tasks Manual for options on how to
    get a system ready to use the Yocto Project.
 
@@ -755,9 +754,9 @@
    are kept. The key point for a layer is that it is an isolated area
    that contains all the relevant information for the project that the
    OpenEmbedded build system knows about. For more information on
-   layers, see the ":ref:`overview-manual/overview-manual-yp-intro:the yocto project layer model`"
+   layers, see the ":ref:`overview-manual/yp-intro:the yocto project layer model`"
    section in the Yocto Project Overview and Concepts Manual. You can also
-   reference the ":ref:`dev-manual/dev-manual-common-tasks:understanding and creating layers`"
+   reference the ":ref:`dev-manual/common-tasks:understanding and creating layers`"
    section in the Yocto Project Development Tasks Manual. For more
    information on BSP layers, see the ":ref:`bsp-guide/bsp:bsp layers`"
    section.
@@ -816,7 +815,7 @@
    key configuration files are configured appropriately: the
    ``conf/local.conf`` and the ``conf/bblayers.conf`` file. You must
    make the OpenEmbedded build system aware of your new layer. See the
-   ":ref:`dev-manual/dev-manual-common-tasks:enabling your layer`"
+   ":ref:`dev-manual/common-tasks:enabling your layer`"
    section in the Yocto Project Development Tasks Manual for information
    on how to let the build system know about your new layer.
 
@@ -827,7 +826,7 @@
 
    The build process supports several types of images to satisfy
    different needs. See the
-   ":ref:`ref-manual/ref-images:Images`" chapter in the Yocto
+   ":ref:`ref-manual/images:Images`" chapter in the Yocto
    Project Reference Manual for information on supported images.
 
 Requirements and Recommendations for Released BSPs
@@ -847,14 +846,14 @@
    layer that can be added to the Yocto Project. For guidelines on
    creating a layer that meets these base requirements, see the
    ":ref:`bsp-guide/bsp:bsp layers`" section in this manual and the
-   ":ref:`dev-manual/dev-manual-common-tasks:understanding and creating layers`"
+   ":ref:`dev-manual/common-tasks:understanding and creating layers`"
    section in the Yocto Project Development Tasks Manual.
 
 -  The requirements in this section apply regardless of how you package
    a BSP. You should consult the packaging and distribution guidelines
    for your specific release process. For an example of packaging and
    distribution requirements, see the ":yocto_wiki:`Third Party BSP Release
-   Process </wiki/Third_Party_BSP_Release_Process>`"
+   Process </Third_Party_BSP_Release_Process>`"
    wiki page.
 
 -  The requirements for the BSP as it is made available to a developer
@@ -902,13 +901,13 @@
    ``meta-bsp_root_name`` directory. This license covers the BSP
    Metadata as a whole. You must specify which license to use since no
    default license exists when one is not specified. See the
-   :yocto_git:`COPYING.MIT </cgit.cgi/meta-raspberrypi/tree/COPYING.MIT>`
+   :yocto_git:`COPYING.MIT </meta-raspberrypi/tree/COPYING.MIT>`
    file for the Raspberry Pi BSP in the ``meta-raspberrypi`` BSP layer
    as an example.
 
 -  *README File:* You must include a ``README`` file in the
    ``meta-bsp_root_name`` directory. See the
-   :yocto_git:`README.md </cgit.cgi/meta-raspberrypi/tree/README.md>`
+   :yocto_git:`README.md </meta-raspberrypi/tree/README.md>`
    file for the Raspberry Pi BSP in the ``meta-raspberrypi`` BSP layer
    as an example.
 
@@ -929,7 +928,7 @@
    -  The name and contact information for the BSP layer maintainer.
       This is the person to whom patches and questions should be sent.
       For information on how to find the right person, see the
-      ":ref:`dev-manual/dev-manual-common-tasks:submitting a change to the yocto project`"
+      ":ref:`dev-manual/common-tasks:submitting a change to the yocto project`"
       section in the Yocto Project Development Tasks Manual.
 
    -  Instructions on how to build the BSP using the BSP layer.
@@ -1014,7 +1013,7 @@
 the following:
 
 -  Create a ``*.bbappend`` file for the modified recipe. For information on using
-   append files, see the ":ref:`dev-manual/dev-manual-common-tasks:using
+   append files, see the ":ref:`dev-manual/common-tasks:using
    .bbappend files in your layer`" section in the Yocto Project Development
    Tasks Manual.
 
@@ -1119,7 +1118,7 @@
    Specifying the matching license string signifies that you agree to
    the license. Thus, the build system can build the corresponding
    recipe and include the component in the image. See the
-   ":ref:`dev-manual/dev-manual-common-tasks:enabling commercially licensed recipes`"
+   ":ref:`dev-manual/common-tasks:enabling commercially licensed recipes`"
    section in the Yocto Project Development Tasks Manual for details on
    how to use these variables.
 
@@ -1171,7 +1170,7 @@
    ``create-layer`` subcommand to create a new general layer. For
    instructions on how to create a general layer using the
    ``bitbake-layers`` script, see the
-   ":ref:`dev-manual/dev-manual-common-tasks:creating a general layer using the \`\`bitbake-layers\`\` script`"
+   ":ref:`dev-manual/common-tasks:creating a general layer using the \`\`bitbake-layers\`\` script`"
    section in the Yocto Project Development Tasks Manual.
 
 -  *Create a Layer Configuration File:* Every layer needs a layer
@@ -1181,16 +1180,16 @@
    :yocto_git:`Source Repositories <>`. To get examples of what you need
    in your configuration file, locate a layer (e.g. "meta-ti") and
    examine the
-   :yocto_git:`local.conf </cgit/cgit.cgi/meta-ti/tree/conf/layer.conf>`
+   :yocto_git:`local.conf </meta-ti/tree/conf/layer.conf>`
    file.
 
 -  *Create a Machine Configuration File:* Create a
    ``conf/machine/bsp_root_name.conf`` file. See
-   :yocto_git:`meta-yocto-bsp/conf/machine </cgit/cgit.cgi/poky/tree/meta-yocto-bsp/conf/machine>`
+   :yocto_git:`meta-yocto-bsp/conf/machine </poky/tree/meta-yocto-bsp/conf/machine>`
    for sample ``bsp_root_name.conf`` files. Other samples such as
-   :yocto_git:`meta-ti </cgit/cgit.cgi/meta-ti/tree/conf/machine>`
+   :yocto_git:`meta-ti </meta-ti/tree/conf/machine>`
    and
-   :yocto_git:`meta-freescale </cgit/cgit.cgi/meta-freescale/tree/conf/machine>`
+   :yocto_git:`meta-freescale </meta-freescale/tree/conf/machine>`
    exist from other vendors that have more specific machine and tuning
    examples.
 
@@ -1198,13 +1197,13 @@
    ``recipes-kernel/linux`` by either using a kernel append file or a
    new custom kernel recipe file (e.g. ``yocto-linux_4.12.bb``). The BSP
    layers mentioned in the previous step also contain different kernel
-   examples. See the ":ref:`kernel-dev/kernel-dev-common:modifying an existing recipe`"
+   examples. See the ":ref:`kernel-dev/common:modifying an existing recipe`"
    section in the Yocto Project Linux Kernel Development Manual for
    information on how to create a custom kernel.
 
 The remainder of this section provides a description of the Yocto
 Project reference BSP for Beaglebone, which resides in the
-:yocto_git:`meta-yocto-bsp </cgit/cgit.cgi/poky/tree/meta-yocto-bsp>`
+:yocto_git:`meta-yocto-bsp </poky/tree/meta-yocto-bsp>`
 layer.
 
 BSP Layer Configuration Example
@@ -1231,7 +1230,7 @@
 :yocto_git:`Source Repositories <>`.
 
 For a detailed description of this particular layer configuration file,
-see ":ref:`step 3 <dev-manual/dev-manual-common-tasks:creating your own layer>`"
+see ":ref:`step 3 <dev-manual/common-tasks:creating your own layer>`"
 in the discussion that describes how to create layers in the Yocto
 Project Development Tasks Manual.
 
@@ -1306,7 +1305,7 @@
 development boards. Realize that much more can be defined as part of a
 machine's configuration file. In general, you can learn about related
 variables that this example does not have by locating the variables in
-the ":ref:`ref-manual/ref-variables:variables glossary`" in the Yocto
+the ":ref:`ref-manual/variables:variables glossary`" in the Yocto
 Project Reference Manual.
 
 -  :term:`PREFERRED_PROVIDER_virtual/xserver <PREFERRED_PROVIDER>`:
@@ -1361,7 +1360,7 @@
    `JFFS2 <https://en.wikipedia.org/wiki/JFFS2>`__ image.
 
 -  :term:`WKS_FILE`: The location of
-   the :ref:`Wic kickstart <ref-manual/ref-kickstart:openembedded kickstart (\`\`.wks\`\`) reference>` file used
+   the :ref:`Wic kickstart <ref-manual/kickstart:openembedded kickstart (\`\`.wks\`\`) reference>` file used
    by the OpenEmbedded build system to create a partitioned image
    (image.wic).
 
@@ -1413,7 +1412,7 @@
    .. note::
 
       For more information on how the SPL variables are used, see the
-      :yocto_git:`u-boot.inc </cgit/cgit.cgi/poky/tree/meta/recipes-bsp/u-boot/u-boot.inc>`
+      :yocto_git:`u-boot.inc </poky/tree/meta/recipes-bsp/u-boot/u-boot.inc>`
       include file.
 
 -  :term:`UBOOT_* <UBOOT_ENTRYPOINT>`: Defines
@@ -1457,7 +1456,7 @@
 metadata used to build the kernel. In this case, a kernel append file
 (i.e. ``linux-yocto_5.0.bbappend``) is used to override an established
 kernel recipe (i.e. ``linux-yocto_5.0.bb``), which is located in
-:yocto_git:`/cgit/cgit.cgi/poky/tree/meta/recipes-kernel/linux`.
+:yocto_git:`/poky/tree/meta/recipes-kernel/linux`.
 
 Following is the contents of the append file: ::