Gitiles
Code Review Sign In
gerrit.openbmc.org / openbmc / openbmc / 86add116627980d099ac9a80c14970a754f10c85
commit86add116627980d099ac9a80c14970a754f10c85[log] [tgz]
authorAndrew Geissler <geissonator@yahoo.com>Tue May 15 07:08:55 2018 -0700
committerBrad Bishop <bradleyb@fuzziesquirrel.com>Fri May 18 17:17:22 2018 +0000
tree48731333099a56b4a62ecabc44662b4abd5631be
parentff028ddc77ad5c018930a3dbe8334fce783e9a80 [diff]
Increase nginx timeouts from 10s to 30s

Testing in certain network environments has show the 10s
timeout is too small. It's unclear if the issue is with the
client or server side. When it hits, it occurs during the
upload of BMC and PNOR images.

The error on the client side is a errno 104 (Connection reset
by peer). The error on the server side is a 408 which in nginx
indicates a timeout for the client_body_timeout setting or the
client_header_timeout setting. It's doubtful the client_header
could be the issue here so only the client_body_timeout was
focused on.

The send_timeout value can also result in a dropped client connection.

The default for both the client_body_timeout and the send_timeout is
60s. In openbmc these were changed to 10s to match with OWASP
guidelines. This commit bumps them up to 30s to address this issue.

Change-Id: I7e360ed03fc533e5ca77f829859a82737fe9d5bf
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
1 file changed
tree: 48731333099a56b4a62ecabc44662b4abd5631be
  1. import-layers/
  2. meta-openbmc-bsp/
  3. meta-openbmc-machines/
  4. meta-phosphor/
  5. bitbake ⇨ import-layers/yocto-poky/bitbake
  6. documentation ⇨ import-layers/yocto-poky/documentation
  7. LICENSE ⇨ import-layers/yocto-poky/LICENSE
  8. meta ⇨ import-layers/yocto-poky/meta
  9. meta-poky ⇨ import-layers/yocto-poky/meta-poky
  10. meta-selftest ⇨ import-layers/yocto-poky/meta-selftest
  11. meta-skeleton ⇨ import-layers/yocto-poky/meta-skeleton
  12. meta-yocto-bsp ⇨ import-layers/yocto-poky/meta-yocto-bsp
  13. oe-init-build-env ⇨ import-layers/yocto-poky/oe-init-build-env
  14. oe-init-build-env-memres ⇨ import-layers/yocto-poky/oe-init-build-env-memres
  15. scripts ⇨ import-layers/yocto-poky/scripts
  16. .gitignore
  17. .gitreview
  18. .templateconf
  19. openbmc-env
  20. README.md
  21. setup
README.md

OpenBMC

Build Status

The OpenBMC project can be described as a Linux distribution for embedded devices that have a BMC; typically, but not limited to, things like servers, top of rack switches or RAID appliances. The OpenBMC stack uses technologies such as Yocto, OpenEmbedded, systemd, and D-Bus to allow easy customization for your server platform.

Setting up your OpenBMC project

1) Prerequisite

  • Ubuntu 14.04
sudo apt-get install -y git build-essential libsdl1.2-dev texinfo gawk chrpath diffstat
  • Fedora 23
sudo dnf install -y git patch diffstat texinfo chrpath SDL-devel bitbake
sudo dnf groupinstall "C Development Tools and Libraries"

2) Download the source

git clone git@github.com:openbmc/openbmc.git
cd openbmc

3) Target your hardware

Any build requires an environment variable known as TEMPLATECONF to be set to a hardware target. OpenBMC has placed all known hardware targets in a standard directory structure meta-openbmc-machines/meta-[architecture]/meta-[company]/meta-[target]. You can see all of the known targets with find meta-openbmc-machines -type d -name conf. Choose the hardware target and then move to the next step. Additional examples can be found in the OpenBMC Cheatsheet

MachineTEMPLATECONF
Palmettometa-openbmc-machines/meta-openpower/meta-ibm/meta-palmetto/conf
Zaiusmeta-openbmc-machines/meta-openpower/meta-ingrasys/meta-zaius/conf
Witherspoonmeta-openbmc-machines/meta-openpower/meta-ibm/meta-witherspoon/conf

As an example target Palmetto

export TEMPLATECONF=meta-openbmc-machines/meta-openpower/meta-ibm/meta-palmetto/conf

4) Build

. openbmc-env
bitbake obmc-phosphor-image

Additional details can be found in the docs repository.

Build Validation and Testing

Commits submitted by members of the OpenBMC GitHub community are compiled and tested via our Jenkins server. Commits are run through two levels of testing. At the repository level the makefile make check directive is run. At the system level, the commit is built into a firmware image and run with an arm-softmmu QEMU model against a barrage of CI tests.

Commits submitted by non-members do not automatically proceed through CI testing. After visual inspection of the commit, a CI run can be manually performed by the reviewer.

Automated testing against the QEMU model along with supported systems are performed. The OpenBMC project uses the Robot Framework for all automation. Our complete test repository can be found here.

Submitting Patches

Support of additional hardware and software packages is always welcome. Please follow the contributing guidelines when making a submission. It is expected that contributions contain test cases.

Bug Reporting

Issues are managed on GitHub. It is recommended you search through the issues before opening a new one.

Features of OpenBMC

Feature List

  • REST Management
  • IPMI
  • SSH based SOL
  • Power and Cooling Management
  • Event Logs
  • Zeroconf discoverable
  • Sensors
  • Inventory
  • LED Management
  • Host Watchdog
  • Simulation
  • Code Update Support for multiple BMC/BIOS images
  • POWER On Chip Controller (OCC) Support

Features In Progress

  • Full IPMI 2.0 Compliance with DCMI
  • Verified Boot
  • HTML5 Java Script Web User Interface
  • BMC RAS

Features Requested but need help

  • OpenCompute Redfish Compliance
  • OpenBMC performance monitoring
  • cgroup user management and policies
  • Remote KVM
  • Remote USB
  • OpenStack Ironic Integration
  • QEMU enhancements

Finding out more

Dive deeper in to OpenBMC by opening the docs repository.

Contact