diff --git a/poky/meta-poky/conf/distro/include/poky-floating-revisions.inc b/poky/meta-poky/conf/distro/include/poky-floating-revisions.inc
index a3da043..1fc5045 100644
--- a/poky/meta-poky/conf/distro/include/poky-floating-revisions.inc
+++ b/poky/meta-poky/conf/distro/include/poky-floating-revisions.inc
@@ -26,8 +26,6 @@
 SRCREV_pn-matchbox-desktop-sato ?= "${AUTOREV}"
 SRCREV_pn-oh-puzzles ?= "${AUTOREV}"
 SRCREV_pn-libowl ?= "${AUTOREV}"
-SRCREV_pn-fstests ?= "${AUTOREV}"
-SRCREV_pn-xvideo-tests ?= "${AUTOREV}"
 SRCREV_pn-clutter ?= "${AUTOREV}"
 SRCREV_pn-clutter-gst ?= "${AUTOREV}"
 SRCREV_pn-libmatchbox ?= "${AUTOREV}"
diff --git a/poky/meta-poky/conf/distro/poky-lsb.conf b/poky/meta-poky/conf/distro/poky-lsb.conf
index 1c426ba..5c7e272 100644
--- a/poky/meta-poky/conf/distro/poky-lsb.conf
+++ b/poky/meta-poky/conf/distro/poky-lsb.conf
@@ -11,4 +11,4 @@
 KERNEL_FEATURES_append_pn-linux-yocto = " features/nfsd/nfsd-enable.scc"
 
 # Use the LTSI Kernel for LSB Testing
-PREFERRED_VERSION_linux-yocto_linuxstdbase ?= "4.14%"
+PREFERRED_VERSION_linux-yocto_linuxstdbase ?= "4.19%"
diff --git a/poky/meta-poky/conf/distro/poky.conf b/poky/meta-poky/conf/distro/poky.conf
index a370b21..6544c03 100644
--- a/poky/meta-poky/conf/distro/poky.conf
+++ b/poky/meta-poky/conf/distro/poky.conf
@@ -1,9 +1,9 @@
 DISTRO = "poky"
 DISTRO_NAME = "Poky (Yocto Project Reference Distro)"
-DISTRO_VERSION = "2.6.2"
-DISTRO_CODENAME = "thud"
+DISTRO_VERSION = "2.6+snapshot-${DATE}"
+DISTRO_CODENAME = "master"
 SDK_VENDOR = "-pokysdk"
-SDK_VERSION := "${@'${DISTRO_VERSION}'.replace('snapshot-${DATE}','snapshot')}"
+SDK_VERSION = "${@d.getVar('DISTRO_VERSION').replace('snapshot-${DATE}', 'snapshot')}"
 
 MAINTAINER = "Poky <poky@yoctoproject.org>"
 
@@ -21,9 +21,9 @@
 
 DISTRO_FEATURES ?= "${DISTRO_FEATURES_DEFAULT} ${DISTRO_FEATURES_LIBC} ${POKY_DEFAULT_DISTRO_FEATURES}"
 
-PREFERRED_VERSION_linux-yocto ?= "4.18%"
+PREFERRED_VERSION_linux-yocto ?= "5.0%"
 
-SDK_NAME = "${DISTRO}-${TCLIBC}-${SDK_ARCH}-${IMAGE_BASENAME}-${TUNE_PKGARCH}"
+SDK_NAME = "${DISTRO}-${TCLIBC}-${SDKMACHINE}-${IMAGE_BASENAME}-${TUNE_PKGARCH}-${MACHINE}"
 SDKPATH = "/opt/${DISTRO}/${SDK_VERSION}"
 
 DISTRO_EXTRA_RDEPENDS += " ${POKY_DEFAULT_EXTRA_RDEPENDS}"
@@ -39,9 +39,6 @@
 
 TCLIBCAPPEND = ""
 
-QEMU_TARGETS ?= "arm aarch64 i386 mips mipsel mips64 mips64el nios2 ppc x86_64"
-# Other QEMU_TARGETS "sh4"
-
 PREMIRRORS ??= "\
 bzr://.*/.*   http://downloads.yoctoproject.org/mirror/sources/ \n \
 cvs://.*/.*   http://downloads.yoctoproject.org/mirror/sources/ \n \
@@ -52,17 +49,6 @@
 p4://.*/.*    http://downloads.yoctoproject.org/mirror/sources/ \n \
 svn://.*/.*   http://downloads.yoctoproject.org/mirror/sources/ \n"
 
-MIRRORS =+ "\
-ftp://.*/.*      http://downloads.yoctoproject.org/mirror/sources/ \n \
-http://.*/.*     http://downloads.yoctoproject.org/mirror/sources/ \n \
-https://.*/.*    http://downloads.yoctoproject.org/mirror/sources/ \n"
-
-# The CONNECTIVITY_CHECK_URI's are used to test whether we can succesfully
-# fetch from the network (and warn you if not). To disable the test set
-# the variable to be empty.
-# Git example url: git://git.yoctoproject.org/yocto-firewall-test;protocol=git;rev=master
-CONNECTIVITY_CHECK_URIS ?= "https://www.example.com/"
-
 SANITY_TESTED_DISTROS ?= " \
             poky-2.5 \n \
             poky-2.6 \n \
diff --git a/poky/meta-poky/conf/layer.conf b/poky/meta-poky/conf/layer.conf
index b9b2637..0d74f4e 100644
--- a/poky/meta-poky/conf/layer.conf
+++ b/poky/meta-poky/conf/layer.conf
@@ -9,7 +9,7 @@
 BBFILE_PATTERN_yocto = "^${LAYERDIR}/"
 BBFILE_PRIORITY_yocto = "5"
 
-LAYERSERIES_COMPAT_yocto = "thud"
+LAYERSERIES_COMPAT_yocto = "warrior"
 
 # This should only be incremented on significant changes that will
 # cause compatibility issues with other layers
diff --git a/poky/meta-poky/conf/local.conf.sample b/poky/meta-poky/conf/local.conf.sample
index cf96598..9068e56 100644
--- a/poky/meta-poky/conf/local.conf.sample
+++ b/poky/meta-poky/conf/local.conf.sample
@@ -124,6 +124,8 @@
 # variable can contain the following options:
 #  "dbg-pkgs"       - add -dbg packages for all installed packages
 #                     (adds symbol information for debugging/profiling)
+#  "src-pkgs"       - add -src packages for all installed packages
+#                     (adds source code for debugging)
 #  "dev-pkgs"       - add -dev packages for all installed packages
 #                     (useful if you want to develop against libs in the image)
 #  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
@@ -239,7 +241,7 @@
 # seen. The two lines below enable the SDL backend too. By default libsdl2-native will
 # be built, if you want to use your host's libSDL instead of the minimal libsdl built
 # by libsdl2-native then uncomment the ASSUME_PROVIDED line below.
-PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-qemu-system-native = " sdl"
 PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
 #ASSUME_PROVIDED += "libsdl2-native"
 
diff --git a/poky/meta-poky/conf/local.conf.sample.extended b/poky/meta-poky/conf/local.conf.sample.extended
index 3ba99f4..87d211d 100644
--- a/poky/meta-poky/conf/local.conf.sample.extended
+++ b/poky/meta-poky/conf/local.conf.sample.extended
@@ -290,18 +290,18 @@
 
 # Image level user/group configuration.
 # Inherit extrausers to make the setting of EXTRA_USERS_PARAMS effective.
-#INHERIT += "extrausers"
+#IMAGE_CLASSES += "extrausers"
 # User / group settings
-# The settings are sperated by the ; character.
+# The settings are separated by the ; character.
 # Each setting is actually a command. The supported commands are useradd,
 # groupadd, userdel, groupdel, usermod and groupmod.
 #EXTRA_USERS_PARAMS = "\
-#useradd -p '' tester; \
-#groupadd developers; \
-#userdel nobody; \
-#groupdel video; \
-#groupmod -g 1020 developers; \
-#usermod -s /bin/sh tester; \
+#    useradd -p '' tester; \
+#    groupadd developers; \
+#    userdel nobody; \
+#    groupdel video; \
+#    groupmod -g 1020 developers; \
+#    usermod -s /bin/sh tester; \
 #"
 
 # Various packages dynamically add users and groups to the system at package
@@ -395,5 +395,6 @@
 #
 #DISTRO_FEATURES_append = " systemd"
 #DISTRO_FEATURES_BACKFILL_CONSIDERED += "sysvinit"
+#VIRTUAL-RUNTIME_login_manager = "shadow-base"
 #VIRTUAL-RUNTIME_init_manager = "systemd"
 #VIRTUAL-RUNTIME_initscripts = "systemd-compat-units"
diff --git a/poky/meta-poky/conf/site.conf.sample b/poky/meta-poky/conf/site.conf.sample
index a4c2f9f..5164fed 100644
--- a/poky/meta-poky/conf/site.conf.sample
+++ b/poky/meta-poky/conf/site.conf.sample
@@ -26,7 +26,7 @@
 # If you wish to use certain hosts without the proxy, specify them in NO_PROXY.
 # See the script for details on syntax. The script oe-git-proxy uses some tools
 # that may not be included on HOSTTOOLS, thus  add them manually through
-# HOSTTOOLS += "getent seq"
+# HOSTTOOLS += "getent"
 
 # Uncomment this to use a shared download directory
 #DL_DIR = "/some/shared/download/directory/"