reset upstream subtrees to yocto 2.6
Reset the following subtrees on thud HEAD:
poky: 87e3a9739d
meta-openembedded: 6094ae18c8
meta-security: 31dc4e7532
meta-raspberrypi: a48743dc36
meta-xilinx: c42016e2e6
Also re-apply backports that didn't make it into thud:
poky:
17726d0 systemd-systemctl-native: handle Install wildcards
meta-openembedded:
4321a5d libtinyxml2: update to 7.0.1
042f0a3 libcereal: Add native and nativesdk classes
e23284f libcereal: Allow empty package
030e8d4 rsyslog: curl-less build with fmhttp PACKAGECONFIG
179a1b9 gtest: update to 1.8.1
Squashed OpenBMC subtree compatibility updates:
meta-aspeed:
Brad Bishop (1):
aspeed: add yocto 2.6 compatibility
meta-ibm:
Brad Bishop (1):
ibm: prepare for yocto 2.6
meta-ingrasys:
Brad Bishop (1):
ingrasys: set layer compatibility to yocto 2.6
meta-openpower:
Brad Bishop (1):
openpower: set layer compatibility to yocto 2.6
meta-phosphor:
Brad Bishop (3):
phosphor: set layer compatibility to thud
phosphor: libgpg-error: drop patches
phosphor: react to fitimage artifact rename
Ed Tanous (4):
Dropbear: upgrade options for latest upgrade
yocto2.6: update openssl options
busybox: remove upstream watchdog patch
systemd: Rebase CONFIG_CGROUP_BPF patch
Change-Id: I7b1fe71cca880d0372a82d94b5fd785323e3a9e7
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
diff --git a/meta-openembedded/meta-networking/recipes-connectivity/samba/samba/smb.conf b/meta-openembedded/meta-networking/recipes-connectivity/samba/samba/smb.conf
new file mode 100644
index 0000000..a0b87c3
--- /dev/null
+++ b/meta-openembedded/meta-networking/recipes-connectivity/samba/samba/smb.conf
@@ -0,0 +1,254 @@
+#
+# Sample configuration file for the Samba suite for Debian GNU/Linux.
+#
+#
+# This is the main Samba configuration file. You should read the
+# smb.conf(5) manual page in order to understand the options listed
+# here. Samba has a huge number of configurable options most of which
+# are not shown in this example
+#
+# Some options that are often worth tuning have been included as
+# commented-out examples in this file.
+# - When such options are commented with ";", the proposed setting
+# differs from the default Samba behaviour
+# - When commented with "#", the proposed setting is the default
+# behaviour of Samba but the option is considered important
+# enough to be mentioned here
+#
+# NOTE: Whenever you modify this file you should run the command
+# "testparm" to check that you have not made any basic syntactic
+# errors.
+
+#======================= Global Settings =======================
+
+[global]
+
+## Browsing/Identification ###
+
+# Change this to the workgroup/NT-domain name your Samba server will part of
+ workgroup = WORKGROUP
+
+# Windows Internet Name Serving Support Section:
+# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
+# wins support = no
+
+# WINS Server - Tells the NMBD components of Samba to be a WINS Client
+# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
+; wins server = w.x.y.z
+
+# This will prevent nmbd to search for NetBIOS names through DNS.
+ dns proxy = no
+
+#### Networking ####
+
+# The specific set of interfaces / networks to bind to
+# This can be either the interface name or an IP address/netmask;
+# interface names are normally preferred
+; interfaces = 127.0.0.0/8 eth0
+
+# Only bind to the named interfaces and/or networks; you must use the
+# 'interfaces' option above to use this.
+# It is recommended that you enable this feature if your Samba machine is
+# not protected by a firewall or is a firewall itself. However, this
+# option cannot handle dynamic or non-broadcast interfaces correctly.
+; bind interfaces only = yes
+
+
+
+#### Debugging/Accounting ####
+
+# This tells Samba to use a separate log file for each machine
+# that connects
+ log file = /var/log/samba/log.%m
+
+# Cap the size of the individual log files (in KiB).
+ max log size = 1000
+
+# If you want Samba to only log through syslog then set the following
+# parameter to 'yes'.
+# syslog only = no
+
+# We want Samba to log a minimum amount of information to syslog. Everything
+# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
+# through syslog you should set the following parameter to something higher.
+ syslog = 0
+
+# Do something sensible when Samba crashes: mail the admin a backtrace
+ panic action = /usr/share/samba/panic-action %d
+
+
+####### Authentication #######
+
+# Server role. Defines in which mode Samba will operate. Possible
+# values are "standalone server", "member server", "classic primary
+# domain controller", "classic backup domain controller", "active
+# directory domain controller".
+#
+# Most people will want "standalone server" or "member server".
+# Running as "active directory domain controller" will require first
+# running "samba-tool domain provision" to wipe databases and create a
+# new domain.
+ server role = standalone server
+
+# If you are using encrypted passwords, Samba will need to know what
+# password database type you are using.
+ passdb backend = tdbsam
+
+ obey pam restrictions = yes
+
+# This boolean parameter controls whether Samba attempts to sync the Unix
+# password with the SMB password when the encrypted SMB password in the
+# passdb is changed.
+ unix password sync = yes
+
+# For Unix password sync to work on a Debian GNU/Linux system, the following
+# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
+# sending the correct chat script for the passwd program in Debian Sarge).
+ passwd program = /usr/bin/passwd %u
+ passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
+
+# This boolean controls whether PAM will be used for password changes
+# when requested by an SMB client instead of the program listed in
+# 'passwd program'. The default is 'no'.
+ pam password change = yes
+
+# This option controls how unsuccessful authentication attempts are mapped
+# to anonymous connections
+ map to guest = bad user
+
+########## Domains ###########
+
+#
+# The following settings only takes effect if 'server role = primary
+# classic domain controller', 'server role = backup domain controller'
+# or 'domain logons' is set
+#
+
+# It specifies the location of the user's
+# profile directory from the client point of view) The following
+# required a [profiles] share to be setup on the samba server (see
+# below)
+; logon path = \\%N\profiles\%U
+# Another common choice is storing the profile in the user's home directory
+# (this is Samba's default)
+# logon path = \\%N\%U\profile
+
+# The following setting only takes effect if 'domain logons' is set
+# It specifies the location of a user's home directory (from the client
+# point of view)
+; logon drive = H:
+# logon home = \\%N\%U
+
+# The following setting only takes effect if 'domain logons' is set
+# It specifies the script to run during logon. The script must be stored
+# in the [netlogon] share
+# NOTE: Must be store in 'DOS' file format convention
+; logon script = logon.cmd
+
+# This allows Unix users to be created on the domain controller via the SAMR
+# RPC pipe. The example command creates a user account with a disabled Unix
+# password; please adapt to your needs
+; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u
+
+# This allows machine accounts to be created on the domain controller via the
+# SAMR RPC pipe.
+# The following assumes a "machines" group exists on the system
+; add machine script = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u
+
+# This allows Unix groups to be created on the domain controller via the SAMR
+# RPC pipe.
+; add group script = /usr/sbin/addgroup --force-badname %g
+
+############ Misc ############
+
+# Using the following line enables you to customise your configuration
+# on a per machine basis. The %m gets replaced with the netbios name
+# of the machine that is connecting
+; include = /home/samba/etc/smb.conf.%m
+
+# Some defaults for winbind (make sure you're not using the ranges
+# for something else.)
+; idmap uid = 10000-20000
+; idmap gid = 10000-20000
+; template shell = /bin/bash
+
+# Setup usershare options to enable non-root users to share folders
+# with the net usershare command.
+
+# Maximum number of usershare. 0 (default) means that usershare is disabled.
+; usershare max shares = 100
+
+# Allow users who've been granted usershare privileges to create
+# public shares, not just authenticated ones
+ usershare allow guests = yes
+
+#======================= Share Definitions =======================
+
+[homes]
+ comment = Home Directories
+ browseable = no
+
+# By default, the home directories are exported read-only. Change the
+# next parameter to 'no' if you want to be able to write to them.
+ read only = yes
+
+# File creation mask is set to 0700 for security reasons. If you want to
+# create files with group=rw permissions, set next parameter to 0775.
+ create mask = 0700
+
+# Directory creation mask is set to 0700 for security reasons. If you want to
+# create dirs. with group=rw permissions, set next parameter to 0775.
+ directory mask = 0700
+
+# By default, \\server\username shares can be connected to by anyone
+# with access to the samba server.
+# The following parameter makes sure that only "username" can connect
+# to \\server\username
+# This might need tweaking when using external authentication schemes
+ valid users = %S
+
+# Un-comment the following and create the netlogon directory for Domain Logons
+# (you need to configure Samba to act as a domain controller too.)
+;[netlogon]
+; comment = Network Logon Service
+; path = /home/samba/netlogon
+; guest ok = yes
+; read only = yes
+
+# Un-comment the following and create the profiles directory to store
+# users profiles (see the "logon path" option above)
+# (you need to configure Samba to act as a domain controller too.)
+# The path below should be writable by all users so that their
+# profile directory may be created the first time they log on
+;[profiles]
+; comment = Users profiles
+; path = /home/samba/profiles
+; guest ok = no
+; browseable = no
+; create mask = 0600
+; directory mask = 0700
+
+[printers]
+ comment = All Printers
+ browseable = no
+ path = /var/spool/samba
+ printable = yes
+ guest ok = no
+ read only = yes
+ create mask = 0700
+
+# Windows clients look for this share name as a source of downloadable
+# printer drivers
+[print$]
+ comment = Printer Drivers
+ path = /var/lib/samba/printers
+ browseable = yes
+ read only = yes
+ guest ok = no
+# Uncomment to allow remote administration of Windows print drivers.
+# You may need to replace 'lpadmin' with the name of the group your
+# admin users are members of.
+# Please note that you also need to set appropriate Unix permissions
+# to the drivers directory for these users to have write rights in it
+; write list = root, @lpadmin
+