blob: a8517c541ea42e4b1b139c6dc2f182aa42c954e4 [file] [log] [blame]
HOMEPAGE = "https://www.samba.org/"
SECTION = "console/network"
LICENSE = "GPL-3.0+ & LGPL-3.0+ & GPL-2.0+"
LIC_FILES_CHKSUM = "file://COPYING;md5=d32239bcb673463ab874e80d47fae504 \
file://${COREBASE}/meta/files/common-licenses/LGPL-3.0;md5=bfccfe952269fff2b407dd11f2f3083b \
file://${COREBASE}/meta/files/common-licenses/GPL-2.0;md5=801f80980d171dd6425610833a22dbe6 "
SAMBA_MIRROR = "http://samba.org/samba/ftp"
MIRRORS += "\
${SAMBA_MIRROR} http://mirror.internode.on.net/pub/samba \n \
${SAMBA_MIRROR} http://www.mirrorservice.org/sites/ftp.samba.org \n \
"
SRC_URI = "${SAMBA_MIRROR}/stable/samba-${PV}.tar.gz \
file://16-do-not-check-xsltproc-manpages.patch \
file://20-do-not-import-target-module-while-cross-compile.patch \
file://21-add-config-option-without-valgrind.patch \
file://0001-packaging-Avoid-timeout-for-nmbd-if-started-offline-.patch \
file://0006-avoid-using-colon-in-the-checking-msg.patch \
file://netdb_defines.patch \
file://glibc_only.patch \
file://iconv-4.7.0.patch \
file://dnsserver-4.7.0.patch \
file://smb_conf-4.7.0.patch \
file://volatiles.03_samba \
"
SRC_URI_append_libc-musl = " \
file://samba-pam.patch \
file://samba-4.3.9-remove-getpwent_r.patch \
"
SRC_URI[md5sum] = "0253021a45c479cec1e135b004a0177a"
SRC_URI[sha256sum] = "1eede30fc8ef6504e24602fb72b00baa0a7b73b59f16d25cb0771dc8c7c57d6e"
inherit systemd waf-samba cpan-base perlnative update-rc.d
# remove default added RDEPENDS on perl
RDEPENDS_${PN}_remove = "perl"
DEPENDS += "readline virtual/libiconv zlib popt libtalloc libtdb libtevent libldb libbsd libaio libpam"
inherit distro_features_check
REQUIRED_DISTRO_FEATURES = "pam"
DEPENDS_append_libc-musl = " libtirpc"
CFLAGS_append_libc-musl = " -I${STAGING_INCDIR}/tirpc"
LDFLAGS_append_libc-musl = " -ltirpc"
LSB = ""
LSB_linuxstdbase = "lsb"
INITSCRIPT_NAME = "samba"
INITSCRIPT_PARAMS = "start 20 3 5 . stop 20 0 1 6 ."
SYSTEMD_PACKAGES = "${PN}-base ${PN}-ad-dc winbind"
SYSTEMD_SERVICE_${PN}-base = "nmb.service smb.service"
SYSTEMD_SERVICE_${PN}-ad-dc = "${@bb.utils.contains('PACKAGECONFIG', 'ad-dc', 'samba.service', '', d)}"
SYSTEMD_SERVICE_winbind = "winbind.service"
# There are prerequisite settings to enable ad-dc, so disable the service by default.
# Reference:
# https://wiki.samba.org/index.php/Setting_up_Samba_as_an_Active_Directory_Domain_Controller
SYSTEMD_AUTO_ENABLE_${PN}-ad-dc = "disable"
# Use krb5. Build active domain controller.
#
PACKAGECONFIG ??= "${@bb.utils.filter('DISTRO_FEATURES', 'systemd zeroconf', d)} \
acl ad-dc cups gnutls ldap mitkrb5 \
"
RDEPENDS_${PN}-base += "${LSB}"
RDEPENDS_${PN}-ctdb-tests += "bash util-linux-getopt"
PACKAGECONFIG[acl] = "--with-acl-support,--without-acl-support,acl"
PACKAGECONFIG[fam] = "--with-fam,--without-fam,gamin"
PACKAGECONFIG[cups] = "--enable-cups,--disable-cups,cups"
PACKAGECONFIG[ldap] = "--with-ldap,--without-ldap,openldap"
PACKAGECONFIG[sasl] = ",,cyrus-sasl"
PACKAGECONFIG[systemd] = "--with-systemd,--without-systemd,systemd"
PACKAGECONFIG[dmapi] = "--with-dmapi,--without-dmapi,dmapi"
PACKAGECONFIG[zeroconf] = "--enable-avahi,--disable-avahi,avahi"
PACKAGECONFIG[valgrind] = ",--without-valgrind,valgrind,"
PACKAGECONFIG[lttng] = "--with-lttng, --without-lttng,lttng-ust"
PACKAGECONFIG[archive] = "--with-libarchive, --without-libarchive, libarchive"
# Building the AD (Active Directory) DC (Domain Controller) requires GnuTLS,
# And ad-dc doesn't work with mitkrb5 for versions prior to 4.7.0 according to:
# http://samba.2283325.n4.nabble.com/samba-4-6-6-Unknown-dependency-kdc-in-service-kdc-objlist-td4722096.html
# So the working combination is:
# 1) ad-dc: enable, gnutls: enable, mitkrb5: disable
# 2) ad-dc: disable, gnutls: enable/disable, mitkrb5: enable
#
# We are now at 4.7.0, so take the above with a grain of salt. We do not need to know where
# krb5kdc is unless ad-dc is enabled, but we tell configure anyhow.
#
PACKAGECONFIG[ad-dc] = ",--without-ad-dc,,"
PACKAGECONFIG[gnutls] = "--enable-gnutls,--disable-gnutls,gnutls,"
PACKAGECONFIG[mitkrb5] = "--with-system-mitkrb5 --with-system-mitkdc=/usr/sbin/krb5kdc,,krb5,"
SAMBA4_IDMAP_MODULES="idmap_ad,idmap_rid,idmap_adex,idmap_hash,idmap_tdb2"
SAMBA4_PDB_MODULES="pdb_tdbsam,${@bb.utils.contains('PACKAGECONFIG', 'ldap', 'pdb_ldap,', '', d)}pdb_ads,pdb_smbpasswd,pdb_wbc_sam,pdb_samba4"
SAMBA4_AUTH_MODULES="auth_unix,auth_wbc,auth_server,auth_netlogond,auth_script,auth_samba4"
SAMBA4_MODULES="${SAMBA4_IDMAP_MODULES},${SAMBA4_PDB_MODULES},${SAMBA4_AUTH_MODULES}"
# These libraries are supposed to replace others supplied by packages, but decorate the names of
# .so files so there will not be a conflict. This is not done consistantly, so be very careful
# when adding to this list.
#
SAMBA4_LIBS="heimdal,cmocka,NONE"
EXTRA_OECONF += "--enable-fhs \
--with-piddir=/run \
--with-sockets-dir=/run/samba \
--with-modulesdir=${libdir}/samba \
--with-lockdir=${localstatedir}/lib/samba \
--with-cachedir=${localstatedir}/lib/samba \
--disable-rpath-install \
--with-shared-modules=${SAMBA4_MODULES} \
--bundled-libraries=${SAMBA4_LIBS} \
${@oe.utils.conditional('TARGET_ARCH', 'x86_64', '', '--disable-glusterfs', d)} \
--with-cluster-support \
--with-profiling-data \
--with-libiconv=${STAGING_DIR_HOST}${prefix} \
--with-pam --with-pammodulesdir=${base_libdir}/security \
"
LDFLAGS += "-Wl,-z,relro,-z,now ${@bb.utils.contains('DISTRO_FEATURES', 'ld-is-gold', ' -fuse-ld=bfd ', '', d)}"
do_install_append() {
for section in 1 5 7; do
install -d ${D}${mandir}/man$section
install -m 0644 ctdb/doc/*.$section ${D}${mandir}/man$section
done
for section in 1 5 7 8; do
install -d ${D}${mandir}/man$section
install -m 0644 docs/manpages/*.$section ${D}${mandir}/man$section
done
install -d ${D}${systemd_system_unitdir}
install -m 0644 packaging/systemd/*.service ${D}${systemd_system_unitdir}
sed -e 's,\(ExecReload=\).*\(/kill\),\1${base_bindir}\2,' \
-e 's,/etc/sysconfig/samba,${sysconfdir}/default/samba,' \
-i ${D}${systemd_system_unitdir}/*.service
if [ "${@bb.utils.contains('PACKAGECONFIG', 'ad-dc', 'yes', 'no', d)}" = "no" ]; then
rm -f ${D}${systemd_system_unitdir}/samba.service
fi
install -d ${D}${sysconfdir}/tmpfiles.d
install -m644 packaging/systemd/samba.conf.tmp ${D}${sysconfdir}/tmpfiles.d/samba.conf
echo "d ${localstatedir}/log/samba 0755 root root -" \
>> ${D}${sysconfdir}/tmpfiles.d/samba.conf
if [ "${LSB}" = "lsb" ]; then
install -d ${D}${sysconfdir}/init.d
install -m 0755 packaging/LSB/samba.sh ${D}${sysconfdir}/init.d/samba
else
install -d ${D}${sysconfdir}/init.d
install -m 0755 packaging/sysv/samba.init ${D}${sysconfdir}/init.d/samba
sed -e 's,/opt/samba/bin,${sbindir},g' \
-e 's,/opt/samba/smb.conf,${sysconfdir}/samba/smb.conf,g' \
-e 's,/opt/samba/log,${localstatedir}/log/samba,g' \
-e 's,/etc/init.d/samba.server,${sysconfdir}/init.d/samba,g' \
-e 's,/usr/bin,${base_bindir},g' \
-i ${D}${sysconfdir}/init.d/samba
fi
install -d ${D}${sysconfdir}/samba
echo "127.0.0.1 localhost" > ${D}${sysconfdir}/samba/lmhosts
install -m644 packaging/RHEL/setup/smb.conf ${D}${sysconfdir}/samba/smb.conf
install -D -m 644 ${WORKDIR}/volatiles.03_samba ${D}${sysconfdir}/default/volatiles/03_samba
install -d ${D}${sysconfdir}/default
install -m644 packaging/systemd/samba.sysconfig ${D}${sysconfdir}/default/samba
# install ctdb config file and test cases
install -D -m 0644 ${S}/ctdb/tests/onnode/nodes ${D}${sysconfdir}/ctdb/nodes
# the items are from ctdb/tests/run_tests.sh
for d in onnode takeover tool eventscripts cunit simple complex; do
testdir=${D}${datadir}/ctdb-tests/$d
install -d $testdir
cp ${S}/ctdb/tests/$d/*.sh $testdir
cp -r ${S}/ctdb/tests/$d/scripts ${S}/ctdb/tests/$d/stubs $testdir || true
done
# fix file-rdeps qa warning
if [ -f ${D}${bindir}/onnode ]; then
sed -i 's:\(#!/bin/\)bash:\1sh:' ${D}${bindir}/onnode
fi
chmod 0750 ${D}${sysconfdir}/sudoers.d
rm -rf ${D}/run ${D}${localstatedir}/run ${D}${localstatedir}/log
}
PACKAGES =+ "${PN}-python ${PN}-pidl \
${PN}-dsdb-modules ${PN}-testsuite registry-tools \
winbind \
${PN}-common ${PN}-base ${PN}-ad-dc ${PN}-ctdb-tests \
smbclient ${PN}-client ${PN}-server ${PN}-test"
python samba_populate_packages() {
def module_hook(file, pkg, pattern, format, basename):
pn = d.getVar('PN', True)
d.appendVar('RRECOMMENDS_%s-base' % pn, ' %s' % pkg)
mlprefix = d.getVar('MLPREFIX', True) or ''
pam_libdir = d.expand('${base_libdir}/security')
pam_pkgname = mlprefix + 'pam-plugin%s'
do_split_packages(d, pam_libdir, '^pam_(.*)\.so$', pam_pkgname, 'PAM plugin for %s', extra_depends='', prepend=True)
libdir = d.getVar('libdir', True)
do_split_packages(d, libdir, '^lib(.*)\.so\..*$', 'lib%s', 'Samba %s library', extra_depends='${PN}-common', prepend=True, allow_links=True)
pkglibdir = '%s/samba' % libdir
do_split_packages(d, pkglibdir, '^lib(.*)\.so$', 'lib%s', 'Samba %s library', extra_depends='${PN}-common', prepend=True)
moduledir = '%s/samba/auth' % libdir
do_split_packages(d, moduledir, '^(.*)\.so$', 'samba-auth-%s', 'Samba %s authentication backend', hook=module_hook, extra_depends='', prepend=True)
moduledir = '%s/samba/pdb' % libdir
do_split_packages(d, moduledir, '^(.*)\.so$', 'samba-pdb-%s', 'Samba %s password backend', hook=module_hook, extra_depends='', prepend=True)
}
PACKAGESPLITFUNCS_prepend = "samba_populate_packages "
RDEPENDS_${PN} += "${PN}-base ${PN}-python ${PN}-dsdb-modules"
RDEPENDS_${PN}-python += "pytalloc python-tdb"
FILES_${PN}-base = "${sbindir}/nmbd \
${sbindir}/smbd \
${sysconfdir}/init.d \
${localstatedir}/lib/samba \
${localstatedir}/nmbd \
${localstatedir}/spool/samba \
${systemd_system_unitdir}/nmb.service \
${systemd_system_unitdir}/smb.service"
FILES_${PN}-ad-dc = "${sbindir}/samba \
${systemd_system_unitdir}/samba.service \
${libdir}/krb5/plugins/kdb/samba.so \
"
RDEPENDS_${PN}-ad-dc = "krb5-kdc"
FILES_${PN}-ctdb-tests = "${bindir}/ctdb_run_tests \
${bindir}/ctdb_run_cluster_tests \
${sysconfdir}/ctdb/nodes \
${datadir}/ctdb-tests \
${datadir}/ctdb/tests \
"
FILES_${BPN}-common = "${sysconfdir}/default \
${sysconfdir}/samba \
${sysconfdir}/tmpfiles.d \
"
FILES_${PN} += "${libdir}/vfs/*.so \
${libdir}/charset/*.so \
${libdir}/*.dat \
${libdir}/auth/*.so \
"
FILES_${PN}-dsdb-modules = "${libdir}/samba/ldb"
FILES_${PN}-testsuite = "${bindir}/gentest \
${bindir}/locktest \
${bindir}/masktest \
${bindir}/ndrdump \
${bindir}/smbtorture"
FILES_registry-tools = "${bindir}/regdiff \
${bindir}/regpatch \
${bindir}/regshell \
${bindir}/regtree"
FILES_winbind = "${sbindir}/winbindd \
${bindir}/wbinfo \
${bindir}/ntlm_auth \
${libdir}/samba/idmap \
${libdir}/samba/nss_info \
${libdir}/winbind_krb5_locator.so \
${sysconfdir}/init.d/winbind \
${systemd_system_unitdir}/winbind.service"
FILES_${PN}-python = "${PYTHON_SITEPACKAGES_DIR}"
FILES_smbclient = "${bindir}/cifsdd \
${bindir}/rpcclient \
${bindir}/smbcacls \
${bindir}/smbclient \
${bindir}/smbcquotas \
${bindir}/smbget \
${bindir}/smbspool \
${bindir}/smbtar \
${bindir}/smbtree \
${libdir}/samba/smbspool_krb5_wrapper"
RDEPENDS_${PN}-pidl_append = " perl"
FILES_${PN}-pidl = "${bindir}/pidl ${datadir}/perl5/Parse"
RDEPENDS_${PN}-client = "\
smbclient \
winbind \
registry-tools \
${PN}-pidl \
"
ALLOW_EMPTY_${PN}-client = "1"
RDEPENDS_${PN}-server = "\
${PN} \
winbind \
registry-tools \
"
ALLOW_EMPTY_${PN}-server = "1"
RDEPENDS_${PN}-test = "\
${PN}-ctdb-tests \
${PN}-testsuite \
"
ALLOW_EMPTY_${PN}-test = "1"